• Laser Solutions
• /
• v.17 no.3
• /
• pp.19-23
• /
• 2014

To directly engrave circuit-line patterns as wide as $6{\mu}m$ in a buildup film to be used as an IC substrate, we applied a projection ablation technique in which an 8 inch dielectric ($ZrO_2/SiO_2$) mask, a DPSS 355nm laser instead of an excimer laser, a ${\pi}$-shaper and a galvo scanner are used. With the ${\pi}$-shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam. The galvo scanner before the $f-{\theta}$ lens moves the flat-top beam ($115{\mu}m{\times}105{\mu}m$) across the 8 inch dielectric mask whose patterned area is $120mm{\times}120mm$. Based on the results of the previous research by the authors, the projection ratio was set at 3:1. Experiments showed that the average width and depth of the engraved patterns are $5.41{\mu}m$ and $7.30{\mu}m$, respectively.

• Journal of Environmental Science International
• /
• v.12 no.2
• /
• pp.101-109
• /
• 2003

Yangdong village is located at Kangdong-myun, Kyungju, Kyungsangbuk-do, Korea. There are two major families, the Sons of Wallsung beginned from Son, So(1433∼1484) and the Lees of Yeohkang the descendant of Lee, Unjeok. They are lived together under check and help for 500 years. The village located on the hill of Ankang plain. There are Homyung mountain and Sonaiu peak in front of it and Solchang mountain on the back. 47 shaped ridges form Blue dragon to the east, and White tiger to the west. Ahnrockchon flows from north Joined Hyungsan river and flows into Youngilman. Therefore the village is located at mountain on it's back and along with stream. Buildings are deployed on the valley between hills, it is not easily detected, but it give it's atmosphere of mountain village. Village location and space composition combined with natural environment, folk belief, feng-shui, and social system of confucianism. Blended buildings affected between ruling and ruled classes or among different families shown environmental design accomplishing united cultural space. The prospect of Yangdong village, a mountain village, expressed two sides of visible scenery of open inside and invisible from outside. Observation point such as head family house, pavilion, and village school are deployed at the point taking bird's-eye view, which striving mental stability.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.449-457
• /
• 1998

Using a numerical model solving the shallow-water equations, unusual huge run-up heights observed in the lees of both Babi and Okushiri islands were investigated in detail. The effects of incident tsunami widths were particularly examined by adjusting the transverse length of the wave-maker in laboratory and numerical experiments. The calculated run-up heights were compared with the laboratory experimental data. It has been found that the run-up heights in the lee of a conical island are strongly dependent on the ratio of a transverse length of incident tsuanmis to a base diameter of the island. Keywords : shallow-water equations, tsunami, run-up height, conical island.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.3
• /
• pp.61-76
• /
• 2001

This study is for analyzing the explosion accidents in the tunnels, roads, subways, streets and various kinds of building construction area with the use of Fault Tree Analysis(FTA). based on the police Department and Guns & Explosives Safety Technology Association's researching materials. the explosion accidents have been investigated and analyzed between 1988 and 1977. As the result, we can find out that the majority of the explosion accidents in Korea is the accidents by flown stones(45.7%), like in Japan. So we make the research chart which is needed for analyzing the explosion accident, and then analyze these accidents systematically. using the investigation codes of the industrial accidents. After that, the FTA was performed on the accidents by flown stones. They result fromm non-observance of the safety rules, and lees knowledge of the safety and so on. Moreover several causes are combined and then the accidents are apt to happen. So according to the results of this study, for the protection of the explosion accidents, the specialized safety education is badly needed and the enough investigation of the places before the work along with the management for safety in working must be planned.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.63-68
• /
• 2017

Background: The combined effect of the low energy electron (LEE) irradiation and $Cu^{2+}$ ion on DNA damage was investigated. Materials and Methods: Lyophilized pBR322 plasmid DNA films with various concentrations (1-15 mM) of $Cu^{2+}$ ion were independently irradiated by monochromatic LEEs with 5 eV. The types of DNA damage, single strand break (SSB) and double strand break (DSB), were separated and quantified by gel electrophoresis. Results and Discussion: Without electron irradiation, DNA damage was slightly increased with increasing Cu ion concentration via Fenton reaction. LEE-induced DNA damage, with no Cu ion, was only 6.6% via dissociative electron attachment (DEA) process. However, DNA damage was significantly increased through the combined effect of LEE-irradiation and Cu ion, except around 9 mM Cu ion. The possible pathways of DNA damage for each of these different cases were suggested. Conclusion: The combined effect of LEE-irradiation and Cu ion is likely to cause increasing dissociation after elevated transient negative ion state, resulting in the enhanced DNA damage. For the decrease of DNA damage at around 9-mM Cu ion, it is assumed to be related to the structural stabilization due to DNA inter- and intra-crosslinks via Cu ion.

• Journal of Korean Theatre Studies Association
• /
• no.48
• /
• pp.225-260
• /
• 2012

In diesem Aufsatz handelt es sich um die Untersuchung ${\ddot{u}}ber$ die Theaterregiearbeit von Lee Youn-Tack, der 25 Jahre lang viele $Theaterst{\ddot{u}}cke$ inszeniert hat. Hier wird es mit dem Begriff 'Krisis' gearbeitet, also unter dem Aspekt der Krise wird sein $k{\ddot{u}}nstlerisches$ Bewusstsein und sein Inszenierungsstil herausgearbeitet. $Schlie{\ss}lich$ soll es bewiesen werden, dass Lees Theater als ${\ddot{A}}sthetik$ der Krise darzustellen ist. Unter dem Aspekt der $Narrativit{\ddot{a}}t$ der Krise ist festzustellen, dass es bei seiner 25 $j{\ddot{a}}hrigen$ Arbeit wesentlich um die Krisendarstellung bzw. Krisenbewusstsein als Intellektuelle geht, und dass Lee $gegen{\ddot{u}}ber$ koreanische Gesellschaft und Gegenwartstheater Krisenbewusstsein hat und es bei seiner Arbeit und bei verschiedener Gelegenheit Diskurs $gef{\ddot{u}}hrt$ hat. Hierbei ist es festzustellen, dass Krise erstens, als kritisches Bewusstsein, zweitens, als Bewusstsein ${\ddot{u}}ber$ die ${\ddot{U}}bergangszeit$, drittens, als rituelle Inszenierungsstile dargestellt wurde. Letztlich wird in diesem Aufsatz kritisiert, dass sein Krisendiskurs auf der gewisser Weise fiktive Selbstinszenierungscharakter hat.

• Microbiology and Biotechnology Letters
• /
• v.8 no.3
• /
• pp.193-198
• /
• 1980

Substantial numbers of malo-lactic bacteria were detected in Korean winery environment such as in grape juices, fermenting musts, lees, aging wines, and bottled apple wines. Among 1363 malo-lactic strains isolated from the above habitats, four superior strains were selected and identified as Leuconostoc oenos strain A-25, B-30, C-13 and Lactobacillus plantarum strain D-11. The strain A-25 showed malate utilizing activity almost equivalent to Leu. oenos ML34, a well-known malo-lactic bacterium. Upon experimental vinifications the malo-lactic fermentation efficiency of A-25 was confirmed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.95-102
• /
• 2017

This paper describes the experimental results for the structural performance of full-scale coupling beams with different reinforcement layout (diagonal and horizontal). For the reinforcements of the coupling beams, high-strength steel bars(SD500 and SD600) were used in order to improve workability and economic feasibility. The rigid steel frames and linked joints were used to maintain the clear span length (distance between both shear walls) of the coupling beam during the cyclic loading. Experimental results indicated that the diagonally reinforced coupling beam specimen could exhibit more ductile behavior compared to horizontally reinforced specimen. ACI318-14 code is applicable to design of coupling beam with diagonally reinforcement, however, that is overestimating the strength of horizontally reinforced coupling beam. It is remarkable that effective elastic stiffness values of both reinforcement details coupling beam significantly lees than ASCE 41-13.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.21-26
• /
• 1999

The technique for calibrating standard particles larger than 1 $\mu$m by using an optical array sizing method has been established. The system consists of an optical microscope with transmission light source, a CCD camera, and a computer equipped with a frame grabber. The center distance between two spheres located at both ends of a row which consists of N spheres is measured in terms of pixel numbers, and divided by (N-1) to obtain the average pixel numbers per particle. This value is multiplied by length conversion constant, which has been determined in advance, to obtain the mean diameter of polystylene spheres. The length conversion constant is found from the microscopic image of calibrated standard stage micrometer plate. In order to reduce error in finding center positions of the scale and particles in the image, a software filter which dilates bright (or dark) object has been used. Spheres having nominal size of 1, 2, 3, 5, and 10$\mu$m were measured, and the maximum deviation of the measured mean diameter valus from their certified values was 0.7%. Standard particles which is larger than 1 $\mu$m can be calibrated by this method with measuredment uncertainy (k=2) lees than 1.53%.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.27-31
• /
• 2013

To engrave high-density circuit-line patterns in IC substrates, we applied a projection ablation technique in which a dielectric ($ZrO_2/SiO_2$) mask, a DPSS UV laser instead of an excimer laser, a refractive beam shaping optics and a galvo scanner are used. The line/space dimension of line patterns of the dielectric mask is $10{\mu}m/10{\mu}m$. Using a ${\pi}$ -shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam; and a telecentric f-${\theta}$ lens focuses it to a $115{\mu}m{\times}105{\mu}m$ flat-top beam on the mask. The galvo scanner before the f-${\theta}$ lens moves the beam across the scan area of $40mm{\times}40mm$. An 1:1 projection lens was used. Experiments showed that the widths of the engraved patterns in a buildup film ranges from $8.1{\mu}m$ to $10.2{\mu}m$ and the depths from $8.8{\mu}m$ to $11.7{\mu}m$. Results indicates that it is required to increase the projection ratio to enhance profiles of the engraved patterns.