• 한국해양공학회지
• /
• 제15권3호
• /
• pp.120-127
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulations. During a few decades, the great effort has been made by the international Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study aims for investigating a complicated structural response of bow structures of simplified models and oil carriers for assessing the energy dissipation and crushing mechanics of the striking vessels through a methodology of the numerical analysis for the various models and its design changes. Through these study an optimal bow construction absorbing great portion of kinetic energy at the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of collision simulation procedures have been performed step by step as follows; 1) 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in four conditions. 2) 21 models consisted of 5 sizes of the full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3) 36 models of 100l oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary members, framing system and colliding conditions, etc. By the first study using simplified models the response of the bow collision is synthetically evaluated for the parameters influencing to the absorbed energy, penetration depth and impact force, etc.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.218-232
• /
• 2015

Piecewise linear (G01-based) tool paths generated by CAM systems lack $G_1$ and $G_2$ continuity. The discontinuity causes vibration and unnecessary hesitation during machining. To ensure efficient high-speed machining, a method to improve the continuity of the tool paths is required, such as B-spline fitting that approximates G01 paths with B-spline curves. Conventional B-spline fitting approaches cannot be directly used for tool path B-spline fitting, because they have shortages such as numerical instability, lack of chord error constraint, and lack of assurance of a usable result. Progressive and Iterative Approximation for Least Squares (LSPIA) is an efficient method for data fitting that solves the numerical instability problem. However, it does not consider chord errors and needs more work to ensure ironclad results for commercial applications. In this paper, we use LSPIA method incorporating Energy term (ELSPIA) to avoid the numerical instability, and lower chord errors by using stretching energy term. We implement several algorithm improvements, including (1) an improved technique for initial control point determination over Dominant Point Method, (2) an algorithm that updates foot point parameters as needed, (3) analysis of the degrees of freedom of control points to insert new control points only when needed, (4) chord error refinement using a similar ELSPIA method with the above enhancements. The proposed approach can generate a shape-preserving B-spline curve. Experiments with data analysis and machining tests are presented for verification of quality and efficiency. Comparisons with other known solutions are included to evaluate the worthiness of the proposed solution.

• 대한핵의학회지
• /
• 제23권1호
• /
• pp.71-83
• /
• 1989

For the development of $^{99m}Tc-labelled$ antimony sulfide colloid and hydroxyethyl starch, various experiments such as preparation of colloid, control of the distribution of particle size, establishment of labelling conditions, determination of labelling yield and radiochemical purity, examination of stability, and organ imagings of rabbits etc. were carried out. 1) Antimony sulfide colloid was readily prepared by the reaction of aqueous solution of antimony potassium tartrate with hydrogen sulfide generated by treating ferrous sulfide with dilute sulfuric acid. The colloid could be stabilized by adding small amount of polyvinylpyrrolidone. 2) Electron microscopy analysis exhibited the distribution of colloid size in the range of $1\sim15nm$ with a major portion of 9 m. The colloid solution was sterilized by membrane filtration $(0.2{\mu}m)$ and then stored at $4^{\circ}C$. This sterilized colloid was so stable that it was usable at least for one year. 3) The antimony sulfide colloid was labelled by adding sodium $pertechnetate-^{99m}Tc$ solution to the reaction vial, followed by adding hydrochloric acid and then boiled for 30 min. The optimal pH of the reaction mixture was found to be in the range of $1.3\sim1.4$. Instant thin layer chromatography (ITLC) analysis showed high labelling yield of above 99.5%. This labelled colloid maintained high radio-chemical purity of above 99% until 10 hours after labelling. 4) Animal studies showed high uptake of $^{99m}Tc-Sb_2S_3$ colloid at lymph vessels and nodes indicating a suitable agent for lymphoscintigraphy. Satisfactory results were also abtained in other clinical studies. 5) Hydroxyethyl starch (HES $0.6\sim1.0%$) was labelled with $Na^{99m}TcO_4$ in the presence of $SnCl_2$ with high labelling yield of above 99.5%. The optimal pH of the reaction mixture was in the range of $1.8\sim2.0$. $^{99m}Tc-HES$ maintained high radiochemical purity of above 99% until 10 hours after labelling. 6) Animal studies showed that $^{99m}Tc-HES$ migrated more rapidly from the injection sites into the lymph vessels than $^{99m}Tc-Sb_2S_3$ colloid while less amount of the former was uptaken at lymph nodes than that of the latter. Similar phenomenon was also observed in other clinical studies. As a result, $^{99m}Tc-Sb_2S_3$ colloid was found to be more effective lymphoscintigraphic agent than $^{99m}Tc-HES$.

• 분석과학
• /
• 제22권2호
• /
• pp.186-190
• /
• 2009

산 매질 조건에서 다양한 할로겐산화물을 이용하여 황 원소를 포함한 유기물(thiourea, methionine)과 무기물(sulfate, thiophosphate)의 산화에 관한 연구를 수행하였다. 산화반응의 최적조건은 3 M 질산용액 매질에서 bromate (${BrO_3}^-$)를 산화제로 사용했을 때 얻어졌다. 유기 황 화합물인 thiourea에서는 100%의 산화 수율을 확인하였으며, methionine을 사용한 결과는 87%이었다. 또한 무기 황 화합물인 thiophosphate와 sulfate의 산화는 각각 80%와 100%의 산화 수율을 얻었으며, 5%의 상대표준표차(RSD)가 있음을 확인하였다. Thiourea의 산화는 1.6배의 bromate가 필요하였으며, methionine과 thiophosphate의 경우에는 20배 이상이 필요함을 관찰하였다. 황산염 이온은 황산 바륨($BaSO_4$)으로 침전을 확보하였으며, 이때 얻어진 방사성 황산 바륨($Ba^{35}SO_4$)은 기체비례계수기(gas proportional counter, GPC)을 이용하여 정량적으로 측정하였다. $^{35}S$ 계측을 위한 소광보정곡선은 무게 차이를 이용하여 작성되었다.

• 자원리싸이클링
• /
• 제28권5호
• /
• pp.42-50
• /
• 2019

본 연구에서는 바나듐을 회수하기 위하여 수용액의 바나듐과 염화암모늄 침전반응에 관하여 고찰하였다. 바나듐 함유 수용액 pH 9.2 ~9.4에서는 결정구조가 [$NH_4VO_3$]인 암모늄메타바나데이트가 침전되었고, 바나듐 함유 수용액의 pH를 황산으로 조절하면 결정구조가 [$(NH_4)_2V_6O_{16}$]인 암모늄폴리바나데이트가 침전되었다. 암모늄폴리바나데이트[$(NH_4)_2V_6O_{16}$]는 바나듐 함유 수용액 pH 2에서는 침전온도 $80{\sim}90^{\circ}C$에서, 그리고 수용액 pH 6 ~ 8에서는 침전온도 $40^{\circ}C$에서 침전되었다. 또한 수용액 pH 2인 산성 영역에서 99% 이상의 침전률을 얻기 위해서는 수용액의 바나듐 함량이 3,000 mg/L 이상은 되어야 하며, 침전온도는 $80^{\circ}C$ 이상으로 유지해야 한다. 알칼리 영역에서 암모늄메타바나데이트를 침전시킬 때, 바나듐 함량은 10,000 mg/L 이상 그리고 침전온도는 $40^{\circ}C$로 유지해야 침전률을 높일 수 있었다. 알루미늄은 수용액의 바나듐 함량 및 pH에 상관없이 거의 침전이 일어나지 않았으나, 철 성분은 염화암모늄과 반응하여 암모늄 자로사이트 형태로 침전되며, 따라서 바나듐의 회수율을 높이기 위해서는 Fe 성분을 우선적으로 제거해야만 한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.119-126
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulation. During a few decades, the great effort has been made by International Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study is aimed at investigating a complicated structural response of bow structures of oil carriers for assessing the energy dissipation and crushing mechanics of striking vessel through a methodology of the numerical analysts for the various models and its design changes. Through this study an optimal bow construction absorbing great portion of kinetic energy in the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of response analysis procedures are performed as follows; 1). 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in two conditions. 2). 21 models conisted of 5 size of full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3). 36 models of 100k oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary mombers, framing system and colliding conditions, etc.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.575-579
• /
• 2010

The technologies of Ni/Cu plating contact is attributed to the reduced series resistance caused by a better contact conductivity of Ni with Si and the subsequent electroplating of Cu on Ni. The ability to pattern narrower grid lines for reduced light shading was combined with the lower resistance of a metal silicide contact and an improved conductivity of the plated deposit. This improves the FF (fill factor) as the series resistance is reduced. This is very much requried in the case of low concentrator solar cells in which the series resistance is one of the important and dominant parameter that affect the cell performance. A Selective emitter structure with highly dopeds regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing In this paper the formation of a selective emitter, and the nickel silicide seed layer at the front side metallization of silicon cells is considered. After generating the nickel seed layer the contacts were thickened by Cu LIP (light induced plating) and by the formation of a plated Ni/Cu two step metallization on front contacts. In fabricating a Ni/Cu plating metallization cell with a selective emitter structure it has been shown that the cell efficiency can be increased by at least 0.2%.

• 자원환경지질
• /
• 제56권5호
• /
• pp.619-628
• /
• 2023

본 연구에서는 토양 내 비소 및 수은의 안정화제로 황산칼슘비료의 적용 가능성을 검토하였다. 아울러 황산칼슘비료의 물리적 특성(입자상, 미분상, 용액상)에 따른 비소 및 수은의 안정화 특성을 상추 재배 포트실험으로 비교?검토하였다. 34일 간의 상추재배를 통해 확인한 비소 및 수은의 전이감소 효과는 대체적으로 70% 이상인 것으로 나타나 안정화제로서의 적용성을 확인하였다. 다만, 용액상 안정화제 처리조건에서 성장한 상추의 생체량은 대조구의 46% 수준으로 가장 낮았는데, 이는 안정화제로부터 유래된 영양물질의 유효도가 극단적으로 높아 오히려 식물체 성장을 저해한 것으로 판단되었다. 토양 내 비소 및 수은의 분획특성 확인결과 수은에서만 존재형태의 변화가 크게 나타났다. 수은은 안정화 처리된 토양에서 원소수은의 감소와 잔류형/황화물 형태의 증가가 확인되었는데, 이러한 경향은 용액상 > 미분상 > 입자상의 순서로 나타났다. 본 연구를 통해 대형 교반장비의 진입이 어려운 농경지에서는 용액상 처리제의 살포만으로 안정화 효과를 얻을 수 있음을 확인하였다. 다만, 높은 영양물질 유효도로 인해 염해토양의 특성을 보일 수 있으므로, 투여량 조절을 통해 농작물 위해를 사전 제어할 필요가 있다.

• 한국식품과학회지
• /
• 제20권5호
• /
• pp.711-717
• /
• 1988

배추의 염절임중 배추 조직으로의 소금흡수 속도를 측정하고 확산에 관한 수학적인 모델과 computer simulation을 통해서 확산계수를 구하였다. 배추 줄기로의 소금의 침투 및 탈염 될 때의 확산계수는 각각 $1.7{\times}10^{-11}m^2/s$와 $11.6{\times}10^{-11}m^2/s$이었다. Apparent diffusivity는 소금의 농도와 배추의 종류에 커다란 영향을 받지 않으며, 온도의존성은 Arrhenius식으로 나타낼 수 있고 이때의 활성화 에너지는 66 KJ/mol 이었다.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.93-102
• /
• 2009

The direct-current electroetching of high purity aluminum in hot aqueous-chloride solution produces a high density of micrometer-wide tunnels whose walls are made up of the {100} planes and penetrate aluminum in the <100> directions at rates of micrometer per second. In the process of the alternating-current pitting of aluminum, cathodic polarization plays an important role in the nucleation and growth of the pits during the subsequent polarization. The direct-current tunnel etching and alternating-current etching of aluminum are basically related to the formation of poorly crystallized or amorphous passive films. If the passive film forms on the wall, a natural misfit exists between the film and the aluminum substrate, which in turn gives rise to stress in both the film and the substrate. Even though the amorphous films do not have directed properties, their stresses are influenced by the substrate orientation. The films on elastically soft substrate are likely to be less stressed and more stable than those on elastically hard substrate. The hardest and softest planes of aluminum are the {111} and {100} planes, respectively. Therefore, the films on the {111} substrates are most likely to be attacked, and those on the {100} substrates are least likely to be attacked. For the tunnel etching, it follows that the tunnel walls tend to consist of the {100} planes. Meanwhile, the tunnel tip, where active corrosion takes place, tend to be made of four closely packed {111} planes in order to minimize the surface energy, which gives rise to the <100> tunnel etching.