• Journal of the Korean association of regional geographers
• /
• v.11 no.1
• /
• pp.114-122
• /
• 2005

To find out the buried age of the relict dune sediments, a luminescence dating bas conducted for a relict dune from the Sindu dunefield on the Taean Peninsula. It shows that the deposition of the dune sands at 3m depth began about 690$\sim$730 years ago. From 3m to l.5m depth, the lower part of the dune bas remained stable, but a relict dune deposit appear at 1.3m depth. This part yields an age of about 68 years. The two samples that were collected from the lower part of the dune at depths of the 1.5 m and 3.0 m below the surface show a net accumulation rate of around 0.75 cm/y which is relatively slow for a coastal dune. The chronology obtained in this study demonstrates that a significant amount of sediments has been replaced or remobilized in the area over the past 1000 years, and there was at least a soil formation process during the same time period. These suggest that a new approach is necessary to identify the formation age of the so-called paleo-dune at the Sind dunefield.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.93-97
• /
• 2014

Curtain wall system of office buildings has recently become very common in Korea. As the multi-layer curtain glazing is exposed to outdoor environment, it is very subjected to direct environmental impact. Consequently, breakage and cracks of glazing due to heat expansion is frequently observed. This study explores various causes and aspects for destruction of multi-layer glazing. A sensitivity analysis was performed on the basis that thermal changes causes damage to the multi-layer glazing. Air temperature in air cavity within the multi-layer glazing was examined to find its effect on multi-layer glazing breakage. Analysis showed high deflection to depth ratio of 1:1.8 and that higher the aspect ratio, smaller is the deflection. Allowable pressure showed that the weakest value is for aspect ratio of 1:2.9. Sensitivity analysis by the area of the glazing showed that as area of glazing becomes higher, allowable pressure and deflection-depth ratio becomes smaller. For allowable pressure and allowable deflection-depth within air cavity, the glazing breakage occurred at least $107^{\circ}C$. The results from glazing breakage by thermal factor shows that it is hard to break the glazing with only an increase in air cavity temperature in multi-layer glazing applied in buildings.

• Ocean Systems Engineering
• /
• v.3 no.1
• /
• pp.9-34
• /
• 2013

Submarine pipelines encounter significant wave forces in shallow coastal waters due to the action of waves. In order to reduce such forces (also to protect the pipe against anchors and dropped objects) they are buried below the seabed. The wave force variation due to burial depends on the engineering characteristics of the sub soil like hydraulic conductivity and porosity, apart from the design environmental conditions. For a given wave condition, in certain type of soil, the wave force can reduce drastically with increased burial and in certain other type of soil, it may not. It is hence essential to understand how the wave forces vary in soils of different hydraulic conductivity. Based on physical model study, the wave forces on the buried pipeline model is assessed for a wide range of wave conditions, for different burial depths and for four types of cohesion-less soils, covering hydraulic conductivity in the range of 0.286 to 1.84 mm/s. It is found that for all the four soil types, the horizontal wave force reduces with increase in depth of burial, whereas the vertical force is high for half buried condition. Among the soils, well graded one is better for half buried case, since the least vertical force is experienced for this situation. It is found that uniformly graded and low hydraulic conductivity soil attracts the maximum vertical force for half buried case. A case study analysis is carried out and is reported. The results of this study are useful for submarine buried pipeline design.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.608-616
• /
• 2013

Debate on the introduction of musical 'stage quota' has been triggered to protect domestic original musical market. In the in-depth interviews with experts, most of the interviewees were in favor of the introduction of this system, ensuring mainly cultural diversity. The proposed model by proponents is that large-scaled national and public theaters(1,000 seats or more) must perform original musicals at least from 20% to 30% of total musical performance days per year set by law until its competitiveness should be ensured. Opponents proposed that government should design musical promotion and funding policy. The study implies that stage quota should carried out since the system is essential, and should be institutionalized through legislation. It is also suggested that government should consider and consult the stakeholders to draft this system reflecting answerers' limitations such as target, quota rate, period to minimize side effects like shrinkage of musical industry.

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.111-121
• /
• 2005

Coronary heart disease is the leading cause of mortality in adult population. Whereas the association between periodontal disease and coronary heart disease (CHD) are controversial, recent studies reported the association between periodontal disease and acute myocardial infarction or prognosis of CHD. This study was aimed to investigate the relationship between periodontal disease and angiographically defined CHD, and acute myocardial infarction, and the prognosis of treated CHD. Patients under the age of 60 who had undergone the diagnostic coronary angiography were enrolled in this study, Subjects were classified as positive CHD (+CHD, n=37) with coronary artery stenosis more than 50% in at least one of major epicardial arteries, and negative CHD (-CHD, n=20) without stenosis. After recording the number of missing teeth, periodontal disease status was measured by means of plaque index (PI), gingival index (GI), bleeding on probing (BOP), probing depth (PD), and clinical attachment level (CAL), Positive CHD subjects were classified into acute myocardial infarction group (AMI), and non-AMI with angina pectoris and old myocardial infarction. Six months postoperatively, positive CHD subjects were followed and had undergone the coronary angiography again. Even though there was no significant difference in the periodontal parameters and status between positive CHD and negative CHD, some periodontal parameters, such as mean probing depth and proportion of sites with probing depth greater than 4mm or 6mm were significantly different between AMI and Non-AMI(p<0.05). There was no significant difference in the periodontal parameters according to in angiographically follow-up status. These results indicate that periodontal disease may be associated with the occurrence of acute myocardial infarction.

• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.851-861
• /
• 2006

The paper proposes a novel unsupervised video object segmentation algorithm for image sequences with low depth-of-field (DOF), which is a popular photographic technique enabling to represent the intention of photographer by giving a clear focus only on an object-of-interest (OOI). The proposed algorithm largely consists of two modules. The first module automatically extracts OOIs from the first frame by separating sharply focused OOIs from other out-of-focused foreground or background objects. The second module tracks OOIs for the rest of the video sequence, aimed at running the system in real-time, or at least, semi-real-time. The experimental results indicate that the proposed algorithm provides an effective tool, which can be a basis of applications, such as video analysis for virtual reality, immersive video system, photo-realistic video scene generation and video indexing systems.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.313-320
• /
• 2016

PURPOSE. The aim of this study was to evaluate the clinical findings and patient satisfaction on implant overdenture designed with Locator implant attachment or Locator bar attachment in mandibular edentulous patients. MATERIALS AND METHODS. Implant survival rate, marginal bone loss, probing depth, peri-implant inflammation, bleeding, plaque, calculus, complications, and satisfaction were evaluated on sixteen patients who were treated with mandibular overdenture and have used it for at least 1 year (Locator implant attachment: n=8, Locator bar attachment: n=8). RESULTS. Marginal bone loss, probing depth, plaque index of the Locator bar attachment group were significantly lower than the Locator implant attachment group (P<.05). There was no significant difference on bleeding, peri-implant inflammation, and patient satisfaction between the two denture types (P>.05). The replacement of the attachment components was the most common complication in both groups. Although there was no correlation between marginal bone loss and plaque index, a significant correlation was found between marginal bone loss and probing depth. CONCLUSION. The Locator bar attachment group indicates lesser marginal bone loss and need for maintenance, as compared with the Locator implant attachment group. This may be due to the splinting effect among implants rather than the types of Locator attachment.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.93-96
• /
• 2008

We analyze a precise seabed feature around the Hupo Bank by using Multi-beam echosounder. Multi-beam echosounder system can observe the topography undulation according to the navigation of the survey ship by shooting wide beam. It is possible to embody a precision seabed feature because it can be make high density of incompletion depth sounding between survey lines. Through this survey, there is the Hupo Bank which is 84 km long, 1-15 km wide, 5.3-160 m deep in the center, at the west is moat, at the east is scarp and submarine canyon. The top of the Hupo Bank is the Wangdol reef that has 5.3 m in depth of water at least. Moat in survey area is 30 m long, and 30-40 m wide and has a depressed channel. The gap of depth of water in scarp is approximately 60 m and shows a characteristic of cuttig plane. Submarine canyon is 3.5 - 13.5 km wide.

• Journal of Korean Dental Science
• /
• v.10 no.2
• /
• pp.66-73
• /
• 2017

Purpose: To evaluate the effect of different-sized drill tips and laser irradiation times on the initial stability of orthodontic miniscrews placed in Er,Cr:YSGG-laser pre-drilled holes in an animal model. Materials and Methods: Laser pre-drilled holes were made in dog mandibular bone with an Er,Cr:YSGG laser using irradiation times of 5, 7, 9, 11, and 13 seconds, and tip diameters of 0.4 and 0.6 mm. The maximum diameter and depth of the pre-drilled holes was measured with micro computed tomography. The maximum insertion torque was measured during placement the miniscrew. Result: Laser pre-drilled holes were conical shaped. The maximum diameter of pre-drilled holes increased with longer laser irradiation times (P>0.05) and larger tip diameters (P<0.05). The depth of pre-drilled holes increased with longer laser irradiation times and larger tip diameters (P<0.05). When the 0.4 mm tip, but not the 0.6 mm tip, was used, the insertion torque decreased significantly with longer laser irradiation times (P<0.05). Conclusion: Tip diameter impacted insertion torque more than irradiation time. It takes at least 9 seconds using a 0.6 mm tip to create a 0.8 mm diameter and 1.0 mm depth hole in thick cortical bone.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.2
• /
• pp.97-105
• /
• 1984

We have, at present, found some studies on the optimum design of reinforced concrete about the simple slab but very few about the multi-story and multi-span slab. The aim of this study is to make a optimum design of coalesced beam and column slab constructure. Some results of the evaluation by using the optimalized algorithm that was developed in this study are as follows. 1. Slab was mainly restricted by the constraint of effective depth, bending moment, and minimum steel ratio; especially the effective depth was the preceding crifical constraint. In the optimum design of slab, therefore, the constraint about the minimum thickness should be surely considered. 2. This optimum design is good economy as much as some 3.4&~6.2% compared with the conventional design method. 3. In most case, it was converged by 3 to 6 iteratin regardless of the highest or lowest value and only in case of N=1 and case 1, there is a little oscillation after the 3rd iteration but it makes no difference in taking either the highest or lowest value because the range of oscillation is low as much as about 1.2% of the total construction cost. 4. In this study the result seeking for constraints that make no difference in the least cost design shows that shear stress and maximum steel ration may not be considered in it. 5. Bending moment was converged by one time iteration regardless of the initial value, while steel ratio, in most case, by two times because both bending moment and steel ratio are the fuction of effective depth.