• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2021

The re-liquefaction drum is a product that installed spray nozzles at the top to directly spray overcooled LNG into evaporative gas and installed demistors to facilitate gas separation, which was developed to increase the re-liquidity efficiency of small scale re-liquefaction facilities. In the hydrostatic test of the drum, no leakage occurred even at a pressure of 1.5 times the design pressure, but during the BOR(Boil Off Rate) test, the bolt loosening occurred due to contraction and expansion by temperature change. For the continued use of the product, insulation construction on flange connections was developed to enable detachment and attachment, and the comparison of heat load with existing insulation confirmed that it was very small compared to the inlet flow rate in the drum.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2023

The cosmetics industry faces a significant challenge in addressing the decreased recycling rate of cosmetic containers due to the composite materials used to meet consumers' aesthetic satisfaction. To address thees issues, eco-friendly packaging solutions such as refill packaging and single-material use have been developed. However, the market for eco-friendly cosmetics packaging requires a product that meets consumers' demands for aesthetics, sensitivity, and eco-friendliness while also performing as well as existing products. This study presents a solution to the challenge of the decreased recycling rate of cosmetic containers by developing a new cosmetic packaging product for cream formulations. The product features an easily separable and dischargeable internal refill container, while maintaining the design aesthetics of the external container. Through various tests, the product was shown to be of equivalent quality and performance to existing cream cosmetic packaging, with no leakage or defects observed. Furthermore, the use of a single-material polypropylene refill container is expected to contribute to the improvement of the plastic recycling rate.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.6
• /
• pp.1001-1020
• /
• 2023

As massive increase in remote work since COVID-19, the boundaries between the inside and outside of corporate networks have become blurred. As a result, traditional perimeter security has stagnated business productivity and made it difficult to manage risks such as information leakage. The zero trust architecture model has emerged, but it is difficult to apply to IT environments composed of various companies. Therefore, using the remote work system configuration as an example, we presented a configuration and methodology that can apply zero trust models even in various network environments such as on-premise, cloud, and network separation. Through this, we aim to contribute to the creation of a safe and convenient cyber environment by providing guidance to companies that want to apply zero trust architecture, an intelligent system that actively responds to cyber threats.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.185-192
• /
• 2010

The chemical-looping combustion(CLC) has advantages of no energy loss for separation of $CO_2$ without $NO_x$ formation. This CLC system consists of oxidation and reduction reactors where metal oxides particles are circulating through these two reactors. In the present study, the reaction kinetic equations of iron oxide oxygen carriers supported on bentonite have been determined by the shrinking core model. Based on the reactivity data, design values of solid circulation rate and solids inventory were determined for the rector. Two types of interconnected fluidized bed systems were designed for CLC application, one system consists of a riser and a bubbling fluidized bed, and the other one has a riser and two bubbling fluidized beds. Solid circulation rates were varied to about $30kg/m^2s$ by aeration into a loop-seal. Solid circulation rate increases with increasing aeration velocity and it increases further with an auxiliary gas flow into the loop-seal. As solid circulation rate is increased, solid hold up in the riser increases. A typical gas leakage from the riser to the fluidized bed is found to be less than 1%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.179-184
• /
• 2016

In recent years, the on-resistance, power loss and cell density of Si power devices have not exhibited significant improvements, and performance is approaching the material limits. GaN is considered an attractive material for future high-power applications because of the wide band-gap, large breakdown field, high electron mobility, high switching speed and low on-resistance. Here we report on the Ohmic contact resistance and reverse-bias characteristics of AlGaN/GaN Schottky barrier diodes with and without annealing. Annealing in oxygen at $500^{\circ}C$ resulted in an increase in the breakdown voltage from 641 to 1,172 V for devices with an anode-cathode separation of $20{\mu}m$. However, these annealing conditions also resulted in an increase in the contact resistance of $0.183{\Omega}-mm$, which is attributed to oxidation of the metal contacts. Auger electron spectroscopy revealed diffusion of oxygen and Au into the AlGaN and GaN layers following annealing. The improved reverse-bias characteristics following annealing in oxygen are attributed to passivation of dangling bonds and plasma damage due to interactions between oxygen and GaN/AlGaN. Thermal annealing is therefore useful during the fabrication of high-voltage GaN devices, but the effects on the Ohmic contact resistance should be considered.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.23-32
• /
• 2016

Today the issue of deterioration of industrial complexes that are located close to life space of residents has been raised as a cause of threats to the safety of local communities. In this study, in order to improve the current risk analysis and scope of community notification, simulated threat zones were comparatively analyzed by utilizing the threat zones of alternative accident scenarios and modes of seasonal weather, and the area with a high probability of damage upon the leakage of toxic substances was predicted by examining wind directions observed at each time slot for each season. In addition, limit evacuation time and minimum separation distance to minimize casualties were suggested, and a proposal to enable more reasonable safety measures for on-site workers and nearby residents made by reviewing the risk management plan currently utilized for emergency response.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1435-1447
• /
• 2015

Finance Companies are operating a security solution such as E-DRM(Enterprise-Digital Right Management), Personal information search, DLP(Data Loss Prevention), Security of printed paper, Internet network separation system, Privacy monitoring system for privacy leakage prevention by insiders. However, privacy leakages are occurring continuously and it is difficult to the association analysis about relating to the company's internal and external distribution of private document. Because log system operated in the separate and independent security solutions. This paper propose a systematic chains that can correlatively analyze business systems and log among heterogeneous security solutions organically and consistently based on security documents. Also, we suggest methods of efficient detection for Life-Cycle management plan about security documents that are created in the personal computer or by individual through the business system and distribution channel tracking about security documents contained privacy.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.31-41
• /
• 1998

As the leakage of crude oil from tankers breaks out frequently, it caused a serious problem for ocean pollution and calls for developing treatments to handle the leaked crude oil and mitigate the pollution. Thus it is required to develop new purification technolgies and appropriate treatment systems which have sufficient treatment capability in order to cope with the anticipated ocean pollution. In this experiment, A and B type heavy oils were used to make the emulsion of both water containing heavy oil and sea-water containing heavy oil. The following are the main results from this study ; 1. When A and B type heavy oils were added to the original sea-water and treatedin the homogrenizer respectively, the particle of oil beacame smaller in both cases. Under the same condition, while the initial oil density of sea-water containing B-heavy oil is higher than of emulsion with A-heavy oil, the particle of A-heavy oil is finer than that of B-heavy oil. 2. When A and B type heavy oils were added to distilled water and treated in the homogenizer respectively, the particle was more dispersed and finer than that in the case of sea-water in both cases. In this result, the water containing oil formed more stable emulsion than the sea-water containing oil. 3. In this experiment, all emulsions showed oil in water types. 4. Since the oil particle is larger in the sea-water than in the distillated water, interms of elimination of oil, it is thought to be more important to give Membrane treatment after implementing sandfilter, activity carbon, coagulation-sedimentation and floating separation as pre-treatment.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.152-163
• /
• 1995

This experiment was performed to observe the adhesion pattern and microleakage in the gingival margin according to variation in the resin cement thickness which results from thickness of Die spacer. which is considered to effect the adaptability of the composite resin inlays. Clearfil CR inlays were fabricated on stone models with CR Sep applicated once and Nice fit twice, 4 times, and 6 times each. After 2nd curing within the CRC-100 oven, CR inlays were cemented with CR inlay cement. Dye(2% methylene blue) penetration and adhesion pattern were evaluated after sectioning of gingival margin into :3 pieces. The results were as follows ; 1. The thickness of resin cement showed unevenchanging pattern with that of die spacer, namely, it was increased until 4 times' application of Nice-Fit but was decreased with 6 times' application of that. 2. The degree of dye penetration wasn't affected by cement thickness within a limited value. 3. Most of dye penetration was shown through the interface between cement and enamel rather than the interface between cement and CR inlay. This shows that the affinity of resin cement for CR inlay was superior to the adhesive strength with tooth structure. 4. No gap was found at the interface between enamel and cement but some showed separation between dentin and cement. It is concidered that the contraction force of cement was less than the bond strength with the enamel. 5. Lots of voids were found in the CR inlay and resin cement. There was a pooling tendency of bonding agent and cement in the axiogingival line angle portion. 6. In some specimens, cracks were shown in enamel margin. From this it could be considered that cavity preparation and surface treatment weakened the tooth structure.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1508-1515
• /
• 1992

Between 1975 and 1992, forty five patients with trachea stenosis received tracheoplasty for relief of obstruction. The causes of airway problem are brain contusion[19 cases, 40%], cerebrovascular disease[3 cases, 7%], drug intoxication[8 cases, 18%], psychotic problem[2 cases, 4%], trachea tumor[3 cases, 7%], adult respiratory distress syndrome[9 cases, 20%] and direct trauma[1 case, 2%]. Direct causes of trachea stenosis were complications of tracheostomy[36 cases, 80%], complications of nasotracheal intubation[5 cases, 11%], tumor[3 cases, 6%] and trauma[1 case, 2%]. Thirty one patients underwent the sleeve resection and end-to-end anastomosis. Five patients performed a wedge resection and end-to-end anastomosis. Forteen patients received the Montgomery T-tube for relief of airway obstruction. Four patients have done simple excision of granulation tissue. Two, subglottic stenosis patients were received Rethi procedure[anterior division of cricoid cartilage, wedge partial resection of lower thyroid cartilage and Montgomery T-tube molding] and the other subglottic stenosis patient underwent permanent trachea fenestration. Including cervical flexion in all patients postoperatively, additional surgical techniques for obtain tension-free anastomosis were hyoid bone release technique in two cases, and hilar mobilization, division of inferior pulmonary ligament and mobilization of pulmonary vessel at the pericardium were performed in one case. Cervical approach was used in 39 cases, cervicomediastinal in 12 cases and transthoracic in one case. Complications of tracheoplasty were formation of granulation tissue at the anastomosis site[3 cases], restenosis[9 cases], trachea-innominate artery fistula[2 cases], wound infection[2 cases], separation of anastomosis[2 cases], air leakage[3 cases], injury to a recurrent laryngeal nerve[temporary 8 cases, permanent 2 cases] and hypoxemia[1 case]. Surgical mortality for resection with primary reconstruction was 6.7%, with one death due to postoperative respiratory failure and two deaths due to tracheo-innominate artery fistula.