• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.391-395
• /
• 2002

This paper described about the ultra-precision profile measurement of aspheric surfaces using contact probing technique. A contact probe has been designed as a sensing device to obtain measuring resolutions in nanometer regime utilizing a leaf spring mechanism and a capacitive-type sensor. The contact probe is attached on the z-axis during measurement while aspheric objects are supported on the single point diamond turning machine(SPDTM). The machine xz-axis motions are monitored by a set of two orthogonal plane mirror type laser interferometers. Experimental results show that the contact probing technique developed of On-machine Measurement System in this investigation is capable of providing a repeatability of 20 nanometers with a $\pm$20 uncertainty of 300 nanometers.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.22-31
• /
• 2005

The purpose of this study is to design a flexural structure that has a function of pan and tilt for an artificial eyeball. The artificial eyeball system has a function of image stabilization, which compensate panning and tilting vibration of the body on which the artificial eyeball is attached. The target closed loop control bandwidth is 50Hz, so the mechanical resonance frequency is required to be more than the control bandwidth, which is a tough design problem because of a big mass of camera and actuator. In this study, the design process including the selection of the principal parameters by numerical analysis with ANSYS will be described, as well as the design results and frequency response.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.484-489
• /
• 1998

In this paper, we examine the displacement characteristics of the parallel leaf spring mechanism with large-deflective elastic hinges, and the validity of this mechanism as a translational and rotational mechanism is confirmed with multi-input system. This study is focused on the linear driving force as an input force, which is applied to the large-deflective elastic mechanism, and the displacement characteristics are discussed with theoretically and experimentally. The motions of this mechanism due to large-deflective hinges are changed by the position of loading force regardless of a single driving force. The numbers of degree of freedom are increased with the hinges, and we can be used to a multiple driving force in order to obtain many types of Output.

• Fisheries and Aquatic Sciences
• /
• v.24 no.3
• /
• pp.121-128
• /
• 2021

The variations of morphological features, density and biomass of vegetative shoots and characteristics of reproductive shoots of Zostera caespitosa were examined in Tongyeong, Korea. Morphological features such as leaf length, width and sheath length of Z. caespitosa showed significant seasonal variation (p < 0.001). The highest aboveground value was recorded in late spring to summer and the lowest value in winter. Density and biomass also showed seasonal variations. Annual average shoot density and biomass of Z. caespitosa were recorded as 1,223.4 leaf m^-2 and 5,956.9 g w.w.m^-2, respectively, and had the highest value in June and lowest values in November and January. Reproductive shoots were observed from April (13℃) to June (21℃). Pistils erected outside sheath, anther dehiscing and small embryos were found in April. Mature fruit and released seeds were found in May and June. These results suggest that this species had a high growth rate in late spring and early summer (15℃-20℃). Reproductive shoots of Z. caespitosa may initially appear at about 10℃ in spring and seed have been released at about 20℃ in fall.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.121-129
• /
• 2000

this paper develops a computational model for the turning maneuver analysis of a cabover type heavy truck. The model having 42 degree-of-freedom is developed using ADAMS. Leaf springs used in the front and rear suspension systems are modeled by dividing it three links and joining them with joints. Force and displacement relationship showing nonlinear hysteric characteristics of the leaf spring is measured and modeled with an exponential function. A velocity and force relationship of a shock absorber is measured and modeled with a spline function. And a stabilizer bar is modeled using ADAMS beam element to consider a twisting and bending effect. To verify the developed model an actual vehicle test is performed in the double lane change course with 50kph and 60kph vehicle velocity. In the actual vehicle test lateral acceleration roll angle and yaw rate are measured, The tendency and peak-to-peak values of the actual vehicle test and simultion results are compared each other.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.1-7
• /
• 2019

The customer of massage chair is expanding day by day from middle age to all ages. In 2018, the market size was 700 billion KRW, an increase of 30 times over 10 years. However, most related SMEs suffer from excessive competition by the market monopoly of some major companies. In this situation, in order for a related company to survive, it is necessary to steadily research and develop new products. Founded in 2009, company L produces massage chairs for health and relaxation of customers. L's products use a sound wave vibration module that is favorable for human body, unlike other products that use vibration motor type. However, frequent breakdowns of massage chair due to the vulnerability of plate (leaf) springs, which play an important role in sound wave vibration modules, made sap its competitiveness. In this paper, we propose a method to design desirable plate spring structure by sequentially experimenting with five different plate springs. The results of this study are expected to contribute to improve the quality of plate spring and the reliability of sound wave vibration module. In the future, it is necessary to find a way to use it in the development of foot massage or scalp management device as well as continuous research to find optimal plate spring structure through various analysis.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.249-249
• /
• 1998

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.275-275
• /
• 1999

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.217-223
• /
• 1995

Nature of graft transmissibility of pear abnormal leaf spot disease was examined by various grafting methods in the greenhouse and field. When the diseased and symptomless twigs were collected in winter and grafted in the next spring to the seed-originated healthy root stock, the abnormal leaf spot was developed only in the case of the diseased twigs. Double grafting on a seed-originated healthy root stock, where the diseased and the symptomless twigs were used as 1st and 2nd scions, respectively, developed abnormal leaf spot lesions without exception on the 2nd scions. Tongue-graft with the diseased and the symptomless trees also incited abnormal leaf spots on the both trees. Abnormal leaf spots of were also developed on HN-39, an indicator pear tree, used as a 2nd scion in a double graft test, where the diseased twig and a seed-originated healthy tree were used as the 1st scion and the root stock, respectively. When the diseased twig was top-grafted to the healthy root stock, lesion development of abnormal spot was limited to the grafted twig itself in the 1st year, but expanded to the main branches in the 2nd year, and spread over the whole tree in the 3rd year. This result indicates that the causal agent of abnormal leaf spot disease is transmitted by graft.

• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.328-334
• /
• 1999

Based on the Euler beam theory and the elastic strain energy method, the elastic stiffness formula of the holddown spring assembly consisting of several leaves was previously derived. Even though the previous formula was known to be useful to estimate the elastic stiffness of the holddown spring assembly, recently it was reported that the elastic stiffness from the previous formula deviated greatly from the test results as the number of leaves was increased. The objective of this study is to extend the previous formula in order to resolve such an increasing deviation when increasing the number of leaves. Additionally, considering the friction forces acting on the interfaces between the leaves, we obtained an extended elastic stiffness formula. The characteristic test and the elastic stiffness analysis on the various kinds of specimens of the holddown spring assembly have been carried out; the validity of the extended formula has been verified by the comparison of their results. As a result of comparisons, it is found that the extended formula is able to evaluate the elastic stiffness of the holddown spring assembly within the maximum error range of + 12%, irrespective of the number of the leaves.