• 한국전기전자재료학회논문지
• /
• 제11권7호
• /
• pp.571-580
• /
• 1998

The numerical model that can describe the ignition of pseudospark discharge using hybrid fluid-particle(Monte Carlo )method has been developed. This model consists of the fluid expression for transport of electrons and ions and Poisson's equation in the electric field. The fluid equation determines the spatiotemporal dependence of charged particle densities and the ionization source term is computed using the Monte carlo method. This model has been used to study the evolution of a discharge in Argon at 0.5 torr, with an applied voltage if 1kV. The evolution process of the discharge has been divided into four phases along the potential distribution : (1) Townsend discharge, (2) plasma formation, (3) onset of hollow cathode effect, (4) plasma expansion. From the numerical results, the physical mechanisms that lead to the rapid rise in current associated with the onset of pseudospark could be identified.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1326-1338
• /
• 1997

Electrical characteristics of soot particles in a LPG diffusion flame were studied for the control of soot particle coagulation. When a DC voltage was applied between two electrodes installed parallel to gas flow, ionic wind effect caused soot deposition on the cathode, implying that most of the soot particles were positively charged. Soot deposit on the cathode linearly increased and was saturated with respect to the strength of the applied voltage. The possibility of applying an AC voltage to enhance the particle coagulation was then investigated and the efficiency of the size control was checked with transmission electron microscope photographs. For the amplitude of 2 kV AC field, primary (spherical) soot particle size decreased from 30 ~ 40 nm to around 20 nm when the frequency of the applied AC voltage was 60 Hz and higher. Collisions between the soot particles in such a selected AC condition could lead to the formation of much bigger agglomerates of roughly 1-5 .mu.m in size.

• 자원환경지질
• /
• 제27권1호
• /
• pp.93-100
• /
• 1994

이 연구는 위스컨신주 도어지역의 지하수계에서의 남성분의 이동과 불규칙한 검출에 대한 메카니즘을 규명하였다. 1991년 봄 충진기간 동안에, 세개씩의 수위정(piezometers)을 내장한 두곳의 관측정과 다섯군데의 가정우물에서 수위와 수질의 변화를 측정하였다. 충진현상에 대한 수위의 변화는 지하수의 충진이 약 4일에서 10일 정도 연체되면서 비교적 빠르게 일어남을 보여주며, 이것은 지하수의 충진이 실루리안 돌로마이트 대수층 내에서 높은 수리전도율(K)을 가진 지대를 통해서 일어나고 있음을 지시해준다. 지하수내의 납성분은 미립자에서만 발견되었고, 용융된 상태로는 검출되지 않았다. 그 농도는 0.2에서 $7.1{\mu}g/mg$인데, 이는 지하수내 총 납성분으로는 0.3에서 $4.7{\mu}g/l$이다. 충진사건부터 최대의 미립자가 가정우물까지 이동하는데 걸리는 연체시간은 약 19일에서 22일 이었다. 지하수내에서 납성분이 미립자와 더불어 있으므로, 가정우물 중에서도 높은 수리전도대와 연결된 우물에서만 납성분이 검출되고, 결과적으로 지역적 불규칙성을 유발한다. 또한 우물에서는, 충진사건에 의한 지하수계로의 미립자의 유입량의 변화, 미립자의 이동에 따른 연체현상, 그리고 이동중의 분산 등으로 인해서 납성분의 농도가 채취하는 시간에 따라서 다르게 나타난다.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1055-1060
• /
• 1998

고주파 저손실 재질로 사용되는 Mn-Zn ferrites의 제조공정 중 입도분포제어가 전자기적 물성에 미치는 효과에 관하여 연구하였다. 입도분포는 분쇄시간을 변화시켜 제어하였으며 철의 유입을 막기위하여 지르코니아볼을 사용하였다. 분쇄시간이 증가함에 따라 입자크기는 2.1 $\mu\textrm{m}$에서 1.0$\mu\textrm{m}$로 감소하였으며, 비표면적은 0.55에서 3.21m2/g으로 증가하였다. 비표면적 값이 증가할수록 소결체의 밀도는 증가하였으며, 높은 비표면적을 가진 분말의 경우 1300$^{\circ}C$ 이 상의 고온에서 소결할 때 불균일한 미세구조와 과대입성장이 발생하였으며, 전자기적 물성감소가 나타났다.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.638-645
• /
• 2006

Recently, we reported that significant ion loss occurred prior to its detection in the conventional single particles mass spectrometry and more seriously the loss is ion-kinetic-energy-dependent. These lead to significant error in the measured chemical composition of nanoparticles. Here we attempted to design a novel ion optics that is capable of 100% detection of ions generated from single nanoparticle. Using a commercial software SIMION, we simulated the trajectories of ions launched at different speeds inside the previous single particle mass spectrometer We tested how affect changes in shape of repelling plate, adding Einzel lens, substitution of tube electrode between extraction and acceleration grids. As a results, we could find a best design by assembling the trials in the present condition.

• 천문학회보
• /
• 제37권2호
• /
• pp.119.2-119.2
• /
• 2012

Charged particle energization is an outstanding problem in space physics. This paper investigates the nonlinear dynamics of Alfve'n-cyclotron waves accompanying particle heating processes and the drift Alfv'en-cyclotron (or EMIC) instability associated with a current disruption event on 29 January 2008 observed with THEMIS satellite by means of a particle-in-cell simulation. The simulation shows that the drift Alfv'en-cyclotron instabilities are excited in two regimes, a relatively low frequency mode propagating in a quasi-perpendicular direction while the second high-frequency branch propagating in a predominantly parallel propagation direction, which is consistent with observation as well as earlier theories. It is shown that parametric decay processes lead to an inverse cascade of Alfv'en-cyclotron waves and the generation of ion-acoustic waves by decay instability. It is also shown that the nonlinear decay processes are accompanied by small perpendicular heating and parallel cooling of the protons, and a pronounced parallel heating of the electrons.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.407-421
• /
• 2009

The present paper addresses the optimal design of composite laminates with the aim of minimizing free-edge delamination stresses. A technique involving the application of particle swarm optimization (PSO) integrated with FEM was developed for the optimization. Optimization was also conducted with the zero-order method (ZOM) included in ANSYS. The semi-analytical method, which provides an approximation of the interlaminar normal stress of laminates under in-plane load, was used to partially validate the optimization results. It was found that optimal results based on ZOM are sensitive to the starting design points, and an unsuitable initial design set will lead to a result far from global solution. By contrast, the proposed method can find the global optimal solution regardless of initial designs, and the solutions were better than those obtained by ZOM in all the cases investigated.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.555-559
• /
• 1997

lead acetate, scandium acetate, niobium isopropoxide를 전구체로 사용한 솔-젤법으로 $Pb(Sc_{1/2}Nb_{1/2})O_3$ 분말을 제조하였다. 젤 분말에 대한 결정화 거동과 상변화가 연구되었다. 솔-젤법을 이용하여 $700^{\circ}C$에서 1시간 동안 열처리를 행하여 97 % 이상의 매우 순수한 $Pb(Sc_{1/2}Nb_{1/2})O_3$ 상을 얻을 수 있었으며 0.2 $\mu \textrm{m}$ 이하의 평균 입자 크기를 가진 매우 미세한 분말의 제조가 가능하다.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.157-160
• /
• 2003

Phase contents and elemental composition of ultradispersed powders obtained by the electrical explosion of tin-leadalloy powders are investigated. It is demonstrated that during the explosion and subsequent cooling, surface layers of powder particles are enriched in lead compared to the initial alloy. The thermal stability of powders oxidizing in air is also investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.475-482
• /
• 2010

Thirty-six Najdi ram lambs, weighing an average of 24 kg and circa 3 months old, were utilized in this trial to evaluate the effects of various alfalfa hay particle lengths in the diet on growth performance, digestion coefficients, nitrogen retention and carcass characteristics. Lambs were randomly allotted to three dietary treatments: 9.5 and 14 mm diets, where alfalfa hay was processed to 9.5 and 14 mm particle lengths, respectively, mixed with 3 parts of concentrate and pelleted as a total mixed ration (TMR), and long hay diet, where one part of loose alfalfa hay (17.8${\pm}$2.4 cm) was offered in combination with 3 parts of only-concentrate pellet. All dietary treatments were homogeneous in their ingredient composition. All lambs were slaughtered after a 14-week feeding trial. Although the results showed no significant effect of hay particle length on DMI, TDN and DCP, lambs fed the 9.5 mm pelleted diet had higher (p<0.05) final body weight, ADG, gain efficiency and nitrogen retention than lambs fed the 14 mm and long hay diets. Altering the particle length of alfalfa hay in diets did not affect the digestibility of DM or CP, whereas digestibilities of ADF and NDF were 3.7% and 5.4% higher (p<0.05), respectively, for the long hay diet versus the 9.5 mm pelleted diet. Hot carcass weight, percentage of separable lean from the $9-11^{th}$ rib joint, and percentages of protein and EE in the separable lean increased (p<0.05) as the particle length of alfalfa hay in the diet decreased. Under the conditions of this study, the reduction of particle length in the TMR played an important role in enhancing performance without altering DM consumption, and this may lead to more efficient productivity of lamb fattening compared with longer chopping lengths.