• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.571-580
• /
• 1998

The numerical model that can describe the ignition of pseudospark discharge using hybrid fluid-particle(Monte Carlo )method has been developed. This model consists of the fluid expression for transport of electrons and ions and Poisson's equation in the electric field. The fluid equation determines the spatiotemporal dependence of charged particle densities and the ionization source term is computed using the Monte carlo method. This model has been used to study the evolution of a discharge in Argon at 0.5 torr, with an applied voltage if 1kV. The evolution process of the discharge has been divided into four phases along the potential distribution : (1) Townsend discharge, (2) plasma formation, (3) onset of hollow cathode effect, (4) plasma expansion. From the numerical results, the physical mechanisms that lead to the rapid rise in current associated with the onset of pseudospark could be identified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.10
• /
• pp.1326-1338
• /
• 1997

Electrical characteristics of soot particles in a LPG diffusion flame were studied for the control of soot particle coagulation. When a DC voltage was applied between two electrodes installed parallel to gas flow, ionic wind effect caused soot deposition on the cathode, implying that most of the soot particles were positively charged. Soot deposit on the cathode linearly increased and was saturated with respect to the strength of the applied voltage. The possibility of applying an AC voltage to enhance the particle coagulation was then investigated and the efficiency of the size control was checked with transmission electron microscope photographs. For the amplitude of 2 kV AC field, primary (spherical) soot particle size decreased from 30 ~ 40 nm to around 20 nm when the frequency of the applied AC voltage was 60 Hz and higher. Collisions between the soot particles in such a selected AC condition could lead to the formation of much bigger agglomerates of roughly 1-5 .mu.m in size.

• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.93-100
• /
• 1994

This study examined the mechanisms of lead transport in the groundwater system and those of irregular detections in groundwater in Door County, Wisconsin. During the spring recharge period in 1991, water-level movement and water-quality change were monitored from two monitoring wells equipped with three piezometers each and from five house wells, respectively. Water-level responses to recharge events were fast with a relatively short lag time ranging from 3 to 10 days, indicating that recharge of groundwater occurs through the high hydraulic conductivity (K) zones in the Silurian dolomite aquifer system. Lead was detected only on particles filtered from groundwater, but not in dissolved state. Concentrations ranged from 0.2 to $7.1{\mu}g/mg$, converted into the total lead concentration in groundwater ranging from $0.3{\mu}g/l$ to $4.7{\mu}g/l$. A lag time between recharge events and peak particle movement at the sampled wells was estimated to range from 19 to 22 days. Due to the particulate nature of lead in groundwater, only the wells connected with the high K zones detect lead, causing the spatial variation. In a given well, lead concentration varies at different sampling times due to the variation in the initial amounts of lead-carrying particles introduced into the groundwater system during recharge events, the lag in particle transport and the dispersion of lead-carrying particles along the advective flowpaths.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1055-1060
• /
• 1998

The effects of particle size distribution have been investigated on the high frequency low loss Mn-Zn fer-rites. The particle size distribution was controlled by milling time. Zirconia ball and engineering plastic jar were employed to avoid iron contamination from the milling media. As increasing the milling time BET value was increased from 0.55 to 3.21m2/g and mean particle size was decreased from 2.1 $\mu\textrm{m}$ to 1.0$\mu\textrm{m}$ The large specific surface area of initial powder resulted in the high density of sintered core. However starting powders with high BET lead to inhomogeneous grain growth as well as poor electromagnetic pro-perties at sintering temperature above 1300$^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.638-645
• /
• 2006

Recently, we reported that significant ion loss occurred prior to its detection in the conventional single particles mass spectrometry and more seriously the loss is ion-kinetic-energy-dependent. These lead to significant error in the measured chemical composition of nanoparticles. Here we attempted to design a novel ion optics that is capable of 100% detection of ions generated from single nanoparticle. Using a commercial software SIMION, we simulated the trajectories of ions launched at different speeds inside the previous single particle mass spectrometer We tested how affect changes in shape of repelling plate, adding Einzel lens, substitution of tube electrode between extraction and acceleration grids. As a results, we could find a best design by assembling the trials in the present condition.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.119.2-119.2
• /
• 2012

Charged particle energization is an outstanding problem in space physics. This paper investigates the nonlinear dynamics of Alfve'n-cyclotron waves accompanying particle heating processes and the drift Alfv'en-cyclotron (or EMIC) instability associated with a current disruption event on 29 January 2008 observed with THEMIS satellite by means of a particle-in-cell simulation. The simulation shows that the drift Alfv'en-cyclotron instabilities are excited in two regimes, a relatively low frequency mode propagating in a quasi-perpendicular direction while the second high-frequency branch propagating in a predominantly parallel propagation direction, which is consistent with observation as well as earlier theories. It is shown that parametric decay processes lead to an inverse cascade of Alfv'en-cyclotron waves and the generation of ion-acoustic waves by decay instability. It is also shown that the nonlinear decay processes are accompanied by small perpendicular heating and parallel cooling of the protons, and a pronounced parallel heating of the electrons.

• Structural Engineering and Mechanics
• /
• v.31 no.4
• /
• pp.407-421
• /
• 2009

The present paper addresses the optimal design of composite laminates with the aim of minimizing free-edge delamination stresses. A technique involving the application of particle swarm optimization (PSO) integrated with FEM was developed for the optimization. Optimization was also conducted with the zero-order method (ZOM) included in ANSYS. The semi-analytical method, which provides an approximation of the interlaminar normal stress of laminates under in-plane load, was used to partially validate the optimization results. It was found that optimal results based on ZOM are sensitive to the starting design points, and an unsuitable initial design set will lead to a result far from global solution. By contrast, the proposed method can find the global optimal solution regardless of initial designs, and the solutions were better than those obtained by ZOM in all the cases investigated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.555-559
• /
• 1997

Lead scandium niobate $Pb(Sc_{1/2}Nb_{1/2})O_3$ powders were prepared by the sol-gel method using lead acetate, scandium acetate, and niobium isopropoxide as precursors. Crystallization behavior and phase formation were investigated for gel-derived powders. After the calcination at $700^{\circ}C$ for 1 hr, $Pb(Sc_{1/2}Nb_{1/2})O_3$ powder with the purity of 97% was formed and the average particle size of powder was below 0.2 $\mu \textrm{m}$.

• Journal of Powder Materials
• /
• v.10 no.3
• /
• pp.157-160
• /
• 2003

Phase contents and elemental composition of ultradispersed powders obtained by the electrical explosion of tin-leadalloy powders are investigated. It is demonstrated that during the explosion and subsequent cooling, surface layers of powder particles are enriched in lead compared to the initial alloy. The thermal stability of powders oxidizing in air is also investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.475-482
• /
• 2010

Thirty-six Najdi ram lambs, weighing an average of 24 kg and circa 3 months old, were utilized in this trial to evaluate the effects of various alfalfa hay particle lengths in the diet on growth performance, digestion coefficients, nitrogen retention and carcass characteristics. Lambs were randomly allotted to three dietary treatments: 9.5 and 14 mm diets, where alfalfa hay was processed to 9.5 and 14 mm particle lengths, respectively, mixed with 3 parts of concentrate and pelleted as a total mixed ration (TMR), and long hay diet, where one part of loose alfalfa hay (17.8${\pm}$2.4 cm) was offered in combination with 3 parts of only-concentrate pellet. All dietary treatments were homogeneous in their ingredient composition. All lambs were slaughtered after a 14-week feeding trial. Although the results showed no significant effect of hay particle length on DMI, TDN and DCP, lambs fed the 9.5 mm pelleted diet had higher (p<0.05) final body weight, ADG, gain efficiency and nitrogen retention than lambs fed the 14 mm and long hay diets. Altering the particle length of alfalfa hay in diets did not affect the digestibility of DM or CP, whereas digestibilities of ADF and NDF were 3.7% and 5.4% higher (p<0.05), respectively, for the long hay diet versus the 9.5 mm pelleted diet. Hot carcass weight, percentage of separable lean from the $9-11^{th}$ rib joint, and percentages of protein and EE in the separable lean increased (p<0.05) as the particle length of alfalfa hay in the diet decreased. Under the conditions of this study, the reduction of particle length in the TMR played an important role in enhancing performance without altering DM consumption, and this may lead to more efficient productivity of lamb fattening compared with longer chopping lengths.