• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.103-109
• /
• 2015

In this study, we quantitatively analyzed the data by measuring the radiation shielding rate and uniformity in order to evaluate the performance of an Apron. In addition, storage conditions were also evaluated. The uniformity measurement was performed by evaluating the Apron DICOM images using a PACS program. The experiment was intended for 51 Aprons being used in three hospitals in the Daejeon area. The radiation shielding rate and uniformity were measured per lead equivalent for 0.25 mmPb, 0.35 mmPb, and 0.5 mmPb. As a result, the higher lead equivalents were, the greater differences in the non-uniformity between the top part and the bottom part became (p=0.020). In all hospitals, regarding the non-uniformity of four places in Aprons, all showed statistically significant differences (p<0.01). The average value of the transmitted radiation dose showed less difference (p=0.005) in the bottom right than in the upper right but was statistically significant. There have been no marks of manufacturing date or the date of purchase in the Apron.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.833-838
• /
• 2004

The analysis of Pb in both PM$_{2.5}$ and PM$_{10}$ fraction of aerosols was made consecutively for every spring season during four year period of 2001 through 2004. To diagnose the impact of the Asian Dust (AD) on metal concentration levels, we compared our Pb measurement data after dividing the whole data sets into AD and NAD period. The results of our analysis indicated that the concentrations of coarse particles increased significantly during the AD period, whereas an increase in the fine counterpart was of moderate degree. However, when Pb concentrations between AD and NAD were compared, the patterns were quite different. From all particle fractions, the Pb concentrations of NAD were slightly or moderately higher than those of AD. The overall results of our study suggest that an increase in particle concentrations during the AD period can cause a rather slight reduction in Pb concentration levels; this can be explained by the dilution effect associated with the increase of Pb-depleted coarse particles.s.s.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.991-994
• /
• 2017

In hypersonic aircraft, increase of aerodynamic and engine heat lead thermal load in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which are able to absorb the heat load by undergoing endothermic reactions. In this study, we investigated the method of measuring the heat sink of catalyst by using exo-tetrahydrodicyclopentadiene as a fuel in a packed bed flow reactor similar to the actual reaction conditions.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.399-400
• /
• 2012

The proposed battery charger presented in this paper is suitable for Lead-Acid Battery and the dc/dc buck converter topology is applied as a charger circuit. The technique adopted in this charger is constant current & constant voltage dual mode, which is decided by the value of voltage of proposed battery. Automatic mode change function is detected by the percentage value of level of battery charging. CC Mode (Constant Current Mode) is operated when charging level is below 80% of the total charging of Battery voltage and above 80% of battery voltage charging, CV Mode (Constant Voltage Mode) is automatically operated. As the charging level exceeds 120%, it automatically terminates charging. The feedback signal to the PWM generator for charging the battery is controlled by using the current and voltage measurement circuits simultaneously. This technique will degrade the damage of proposed type of battery and improve the power efficiency of charger. Finally, a prototype charger circuit designed for a 12-V 7-Ah lead acid battery is constructed and tested to confirm the theoretical predictions. Satisfactory performance is obtained from simulation and the experimental results.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.11
• /
• pp.163-170
• /
• 2019

Most of the current crack investigation work consists of visual inspection using simple measuring equipment such as crack scale. These methods involve the subjection of the inspector, which may lead to differences in the inspection results prepared by the inspector, and may lead to a large number of measurement errors. So, this study proposes an image-based crack detection method to enhance objectivity and efficiency of concrete crack investigation. In this study, YOLOv2 was used to determine the presence of cracks in the image information to ensure the speed and accuracy of detection for real-time analysis. In addition, we extracted shapes of cracks and calculated quantitatively, such as width and length using various image processing techniques. The results of this study will be used as a basis for the development of image-based facility defect diagnosis automation system.

• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.103-113
• /
• 1993

This study was conducted to explore the feasibility of using the lead level in the hair of children as a screening test for lead intoxication of children and as an indicator for environmental pollution. Lead concentration of hair was measured for 268 seven to nine-year-old elementary school children in Taegu city (147 children) and Gampo town(121 children). The lead level in hair was measured by atomic absorption spectrophotometer equipped with a graphite furnace atomizer. The following information was obtained for all children: sex, age, father's occupation and smoking habits, kinds of hair cleaner, fingernail biting habits, and status of the child's hands and clothing. The mean lead level in hair was $8.7{\pm}2.9{\mu}g/g$ in the urban area and $7.7{\pm}2.2{\mu}g/g$ in the rural area. There were significant differences between two groups(p<0.01). The difference of lead levels in hair measured by cleanliness of the child's hands(clean: $7.4{\pm}2.7{\mu}g/g$, dirty: $8.2{\pm}2.6{\mu}g/g$) and child's clothing(clean: $8.0{\pm}2.5{\mu}g/g$, dirty: $9.3{\pm}2.6{\mu}g/g$) were statistically significant, but other factors were not significant. In multiple regression analysis, difference of residency and age were significant variables for lead level in the hair of children. These findings suggest that measurement of lead level in the hair is a useful method for the screening of the lead intoxication of children and monitoring environmental conditions.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.471-479
• /
• 2023

In In-situ radioactivity measurement techniques, efficiency calibration models use predefined models to simulate a sample's geometry and radioactivity distribution. However, simplified efficiency calibration models lead to uncertainties in the efficiency curves, which in turn affect the radioactivity concentration results. This study aims to develop an efficiency calibration optimization methodology to improve the accuracy of in-situ gamma radiation measurements for byproducts from industrial facilities. To accomplish the objective, a drive mechanism for rotational measurement of an byproduct simulator and a sample was constructed. Using ISOCS, an efficiency calibration model of the designed object was generated. Then, the sensitivity analysis of the efficiency calibration model was performed, and the efficiency curve of the efficiency calibration model was optimized using the sensitivity analysis results. Finally, the radiation concentration of the simulated subject was estimated, compared, and evaluated with the designed certification value. For the sensitivity assessment of the influencing factors of the efficiency calibration model, the ISOCS Uncertainty Estimator was used for the horizontal and vertical size and density of the measured object. The standard deviation of the measurement efficiency as a function of the longitudinal size and density of the efficiency calibration model decreased with increasing energy region. When using the optimized efficiency calibration model, the measurement efficiency using IUE was improved compared to the measurement efficiency using ISOCS at the energy of ²²⁸Ac (911 keV) for the nuclide under analysis. Using the ISOCS efficiency calibration method, the difference between the measured radiation concentration and the design value for each simulated subject measurement direction was 4.1% (1% to 10%) on average. The difference between the estimated radioactivity concentration and the design value was 3.6% (1~8%) on average when using the ISOCS IUE efficiency calibration method, which was closer to the design value than the efficiency calibration method using ISOCS. In other words, the estimated radioactivity concentration using the optimized efficiency curve was similar to the designed radioactivity concentration. The results of this study can be utilized as the main basis for the development of regulatory technologies for the treatment and disposal of waste generated during the operation, maintenance, and facility replacement of domestic byproduct generation facilities.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.338-346
• /
• 2013

The conventional lead acid battery is optimized for cranking performance of engine. Recently electric devices and fuel economy technologies of battery have influenced more deep cycle of dynamic behavior of battery. I also causes to reduce battery life-time. This study proposed that aging battery model is focused for increasing of battery durability. The stress factors of battery aging consist of discharge rate, charging time, full charging time and temperature. This paper considers the electrochemical kinetics, the ionic species conservation, and electrode porosity. For prediction of battery life cycle we consider battery model containing strong impacts, corrosion of positive grid and shedding. Finally, we validated that modeling results were compared with the accelerated thermal measurement data.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.33-38
• /
• 2005

One piece of Haedong-Tongue(해동통보) minted at 1,102 A.D. was excavated from No.20 wooden coffin, Sinbong-dong, Cheongju. It was analyzed by micro-XRF and ICP and determined the concentrations of ten elements such as Cu, Pb, Sn, Zn, Fe, Mn, Sb, Co, As, Ag and Ni. The measurement of lead isotope ratios was also carried out in order to predict the provenance of raw materials used for minting of Haedong-Tongbo. It was found that Haedong-Tongbo was minted with three compositions of $Cu\;75.5\%,\;Pb\;13.3\%\;and\;Sn\;6.0\%$, which were different from the typical composition of Chosen-Tongbo and Sangpyung-Tongbo used in Chosen dynasty. Lead isotope ratios of Haedong-Tongbo showed that the provenance of lead used for minting of it suggested the possibility to be originated from Southern part of Korea.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.191-197
• /
• 1992

An ancient Korean bronze dagger excavated from Yongjai-ri, Iksan-kun, presumed to be manufactured in the pre-historical age, was examined by means of chemical analysis, energy dispersive spectrometry, optical and scanning electron microscopy. Also the measurement of lead isotope ratios was carried out in order to predict the site where raw materials were produced. The composition was identified as 75.3% Cu, 17.1% Sn and 6.8% Pb which was a typical composition of Korean bronze dagger. The microstructure was consisted of ${\alpha}$ and (${\alpha}+{\delta}$) eutectoid. The (${\alpha}+{\delta}$) eutectoid can be easily corroded in comparison with ${\alpha}$. The segregation was frequently observed in the interior of the sample. According to the lead isotopes ratios, raw materials have possibility to be from North China.