• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.378-384
• /
• 2002

In this paper, we propose a mixed integer optimization approach for solving the inventory problem with variable lead time, reorder point, crashing cost and price -quantity discount. Chang and Chang[15] study a continuous review inventory model in which lead time is a decision variable under price-quantity discount. However, their study cannot find the optimal solution due to the flaws in the modeling and the solution procedure. We present a complete procedure to find the optimal solution for the model. In addition to the above contribution, we also apply the minimax distribution free approach to the model to devise a practical procedure which can be used without specific information on demand distribution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.816-821
• /
• 1999

Cholesterol esterase(pCEH, pancreas cholesterol ester hydrolase, E.C.3.1.1.13) which is secreted from pancreas has been known as an important lipase for cholesterol uptake. cholesteryl acyl esters from a diet must be hydrolyzed to free cholesterol and fatty acid by cholesterol esterase before the absorption in small intestine. For the development of inhibitory substances from natural source, we screened many extracts of oriental herbs for the inhibition of cholesterol esterase in vitro. The ethanol extract of Ephedra herba showed strong inhibitory activity. Solvent fractionation and silica gel column chromatography with the extract lead to the purification of the inhibitory principle in Ephedra herba. Crystallized inhibitor was identified as ( ) ephedrine by using UV, FT IR, 1H NMR, 13C NMR and GC/Mass. These results suggest that ( ) ephedrine can be used as a potential lead compound for the development of inhibitor for cholesterol uptake by cholesterol esterase inhibition.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1685-1686
• /
• 2000

Crack-free and homogeneous com ceramic and epitaxial lead zirconate titanat ferroelectric thin films with perovskite structure been prepared by sol-gel processing. Ti-isoprop and lead acetate trihydrate and zirconium-pro are used raw materials. EAcAc is used as a cat 2-Methoky ethanol is used as a solvent annealing temperatures of the thin films are 0$^{\circ}C$.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.287-294
• /
• 2005

전자 패키지가 열을 받을 때 회로기판과 칩의 열팽창계수 차이에 의해 발생되는 응력은 솔더 조인트의 파손에 영향을 미친다. 본 연구에서는 이 영향을 정량적으로 규명하기 위하여 열충격시험기를 이용해 얻어진 솔더조인트의 전기저항 변화와 수명과의 상관관계를 규명하였고, BGA 솔더조인트의 수명을 정량적으로 도출하였다. 또한 Sn-3.5Ag-0.5Cu 무연솔더와 63Sn-37Pb 유연솔더를 위의 실험에 동시에 적용시켜 건전성을 FORM(first-order reliability method)과 Weibull Function Model을 이용해 비교하였다.

• Journal of the Korean Ceramic Society
• /
• v.56 no.1
• /
• pp.1-23
• /
• 2019

Dielectric materials with inherently high power densities and fast discharge rates are particularly suitable for pulsed power capacitors. The ongoing multifaceted efforts on developing these capacitors are focused on improving their energy density and storage efficiency, as well as ensuring their reliable operation over long periods, including under harsh environments. This review article summarizes the studies that have been conducted to date on the development of high-performance dielectric ceramics for employment in pulsed power capacitors. The energy storage characteristics of various lead-based and lead-free ceramics belonging to linear and nonlinear dielectrics are discussed. Various strategies such as mechanical confinement, self-confinement, core-shell structuring, glass incorporation, chemical modifications, and special sintering routes have been adopted to tailor the electrical properties and energy storage performances of dielectric ceramics. In addition, this review article highlights the challenges and opportunities associated with the development of pulsed power capacitors.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2012

Presently, the most promising family of lead-free piezoelectric ceramics is based on $K_{0.5}Na_{0.5}NbO_3$(KNN). Lithium, silver and antimony co-doped KNN ceramics show high piezoelectric properties at room temperature, but often suffer from abnormal grain growth. In the present work, the $(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$ component, which has relaxor ferroelectric characteristics, was doped to suppress the abnormal grain growth. To investigate this effect, Lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3-x(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$[KNLN-AS-xBCTZ] piezoelectric ceramics were synthesized by ball mill and nanosized-milling processes in lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3$ in order to suppress the abnormal grain growth. The nanosized milling process of calcined powders enhanced the sintering density. The phase structure, microstructure, and ferroelectric and piezoelectric properties of the KNLN-AS ceramics were systematically investigated. XRD patterns for the doped and undoped samples showed perovskite phase while tetragonality was increased with increasing BCZT content, which increase was closely related to the decrease of TO-T. Dense and uniform microstructures were observed for all of the doped BCZT ceramics. After the addition of BCTZ, the tetragonal-cubic and orthorhombic-tetragonal phase transitions shifted to lower temperatures compared to those for the pure KNNL-AS. A coexistence of the orthorhombic and tetragonal phases was hence formed in the ceramics with x = 0.02 mol at room temperature, leading to a significant enhancement of the piezoelectric properties. For the composition with x = 0.02 mol, the piezoelectric properties showed optimum values of: $d_{33}$ = 185 pC/N, $k_P$ = 41%, $T_C=325^{\circ}C$, $T_{O-T}=-4^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.723-727
• /
• 2011

0.935Ba$TiO_3$-0.065($Bi_{0.5}Na_{0.5}$)$TiO_3+xmol%MnO_2$ (BBNTM-x) ceramics with $0{\leq}x{\leq}0.05$ were fabricated with muffled sintering by a modified synthesis process. Their microstructure and enhanced positive temperature coefficient of resistivity (PTCR) characteristics were systematically investigated in order to obtain lead-free high TC PTCR thermistors. All specimens showed a perovskite structure with a tetragonal symmetry and no secondary phase was observed. Grain growth was achieved when the doped MnO2 was increased above 0.02 mol%. This is due to the effect of positive Mn ion doping as an acceptor compensating a Ba vacancy occurred by the higher donor dopant concentration of $Bi^{3+}$ ion. Especially, enhanced PTCR characteristics of the extremely low ${\rho}_{RT}$ of $9\;{\Omega}{\cdot}cm$, PTCR jump of $5.1{\times}10^3$, ${\alpha}$ of 15.5%/$^{\circ}C$ and high $T_C$ of $167^{\circ}C$ were achieved for the BBNTM-0.04 ceramics.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.713-718
• /
• 2018

In many previous studies, monte carlo simulation is used to produce lead-free shielding sheet, and the possibility of radiation shielding capability and weight reduction is presented. But it is difficult to simulation for binder and micro-pores because of In fact it does not provide sufficient information necessary for the commercialization process. Therefore, in this paper, the results of radiation shielding capability corresponding to filling factor was presented by using the screen printing method to provide information on gel-paste required for the commercialization process. In this study, the geometric setup for evaluate of radiation shielding ability was designed to comply with IEC 61331-1:2014 and KS A 4025. In addition, radiation irradiation conditions were 100 kVp filtered with 2.0 mmAl total filtration was applied according to KS A 4021 standard. In this study, Pb $1270{\mu}m$, $BaSO_4$ $3035{\mu}m$, $Bi_2O_3$ $1849{\mu}m$ and $WO_3$ $2631{\mu}m$ were analyzed based on ten value layer. Additionally, the filling factor was analyzed as $BaSO_4$ 38.6%, $Bi_2O_3$ 27.1%, $WO_3$ 30.15%. However, in the case of applying low-temperature high-pressure molding in the future, it is expected that the radiation shielding capability can be sufficiently improved by reducing the porosity while increasing the filling factor.

• Journal of Powder Materials
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2024

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and self-powered devices owing to their excellent mechanical durability and output performance. In this study, we design a lead-free piezoelectric nanocomposite utilizing (Ba_0.85 Ca_0.15)(Ti_0.9Zr_0.1)O₃ (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solid-state reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 ㎂, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.521-526
• /
• 2008

Purpose: Most burn scar contractures are curable with skin grafts, but free flaps may be needed in some cases. Due to the adjacent tissue scarring, local flap is rarely used, and thus we may consider free flap which gives us more options than local flap. However, inappropriate performance of free flap may lead to unsatisfactory results despite technical complexity and enormous amount of effort. The author will discuss the points we should consider when using free flaps in treating burn scar contractures Methods: We surveyed patients who underwent free flaps to correct burn scar contractures from 2000 to 2007. We divided patients into two groups. The first group was those in which free flaps were inevitable due to exposure of deep structures such as bones and tendons. The second group was those in which free flap was used to minimize scar contracture and to achieve aesthetic result. Results: We performed 44 free flap on 42 patients. All of the flaps were taken well except one case of partial necrosis and wound dehiscence. Forearm free flap was the most common with 21 cases. Most of the cases(28 cases) in which free flaps were inevitable were on the wrist and lower limbs. These were cases of soft tissue defect due to wide and extensive burns. Free flaps were done in 16 cases to minimize scar contracture and to obtain aesthetic outcome, recipient sites were mostly face and upper extremities. Conclusion: When using free flaps for correction of burn scar contractures, proper release and full resurfacing of the contracture should be carried out in advance. If inadequate free flap is performed, secondary correction is more challenging than in skin grafts. In order to optimize the result of reconstruction, flap thickness, size and scar of the recipient site should be considered, then we can achieve natural shape, and minimize additional correction.