• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.121-128
• /
• 1980

Isonitrosobenzoylacetone is particularly interesting, as the isonitroso group has two potentially coordinating sites which can compete with the cabonyl groups in forming bonds with the metal ions. In this paper tris(isonitrosobenzoylacetonato)cobalt(III) and bis(isonitrosobenzoylacetonato)palladium(II) have been prepared, and their structures have been investigated. Spectroscopic studies lead to the conclusion that the both complexes do not contain an OH group in the chelated five-membered ring structure in which the ligand coordinates to metal through oxygen of the acetyl group and nitrogen of the isonitroso group. The coordination manner of this ligand is similar to that of isonitrosobenzoylacetone obtained by Patel and Haldar.

• YAKHAK HOEJI
• /
• v.44 no.5
• /
• pp.399-405
• /
• 2000

We have synthesized a novel platinum (II) coordination complex containing trans-ι-1,2-diaminocyclohexane (DACH) as a carrier ligand and 1,2-bis (diphenylphosphino)ethane (DPPE) as a leaving group. In addition, nitrate was added to improve the water-solubility. A new series of [Pt (trans-ι-DACH) (DPPE)].2NO$_3$(PC) was evaluated for its cytotoxic activity on MKN-45 human gastric adenocarcinoma cells and normal primary cultured kidney cells. PC has demonstrated high levels of cytotoxicity against MKN-45/S, MKN-45/ADR and MKN-45/CDDP cells. The cytotoxicity of PC against rabbit proximal renal tubular cells, human renal cortical cells, and human renal cortical tissues, determined using the MTT assaying technique, the ($^3$H)-thymidine uptake and the glucose consumption tests, was found to be quite less than those of cisplatin. Based on these results, this novel platinum (II) coordination complex appears to be better for improving antitumor activities with low nephrotoxicity and is a valuable lead in the development of new clinically available anticancer chemotherapeutic agents.

• Computers and Concrete
• /
• v.21 no.6
• /
• pp.727-739
• /
• 2018

Crack is the most common typical feature of concrete deterioration, so routine monitoring and health assessment become essential for identifying failures and to set up an appropriate rehabilitation strategy in order to extend the service life of concrete structures. At present, image segmentation algorithms have been applied to crack analysis based on inspection images of concrete structures. The results of crack segmentation offering crack information, including length, width, and area is helpful to assist inspectors in surface inspection of concrete structures. This study proposed an algorithm of image segmentation enhancement, named morphological segmentation based on edge detection-II (MSED-II), to concrete crack segmentation. Several concrete pavement and building surfaces were imaged as the study materials. In addition, morphological operations followed by cross-curvature evaluation (CCE), an image segmentation technique of linear patterns, were also tested to evaluate their performance in concrete crack segmentation. The result indicates that MSED-II compared to CCE can lead to better quality of concrete crack segmentation. The least area, length, and width measurement errors of the concrete cracks are 5.68%, 0.23%, and 0.00%, respectively, that proves MSED-II effective for automatic measurement of concrete cracks.

• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.36-45
• /
• 2003

This study is made for examining the characteristics of the lead-zinc deposition from the mineralogy of pyrrhotite at the Yeonhwa 1 Mine, Korea. The pyrrhotite of the Yeonhwa 1 mine is divided two species; the pynhotites I and II. The pyrrhotite I that represents the product in Stage II mineralization is characterized by hexagonal pyrrhotite occurring as the mechanical mixtures of hexagonal and monoclinic phases with various proportion. These mixtures might be formed from 'primary' hexagonal pyrrhotite by the subsequent retrograde reaction and/or by the influence of later mineralization in Stage III. Whereas the pyrrhotite II crystallized out in later Mineralization Stage III (hydrothermal stage) is always monoclinic variant with ferromagnetic properties; no two phase mixtures have been recognized.

• Environmental Analysis Health and Toxicology
• /
• v.4 no.3_4
• /
• pp.29-59
• /
• 1989

For the purpose of electrolytic treatment of wastewater containing various heavy metals, the BPBE Cell of batch and continuous type was considered and experimented. Some results from this study were summarized as follows: 1. When the artificial wastewater containing 500 mg/l of the concentration of various heavy metallic ion was electrolyzed in BPBE Cell of batch type, the removal efficicency was over 95% in cadmiun (II), lead (II), chromium (Ⅵ) and over 85% in copper (II), chromium (III). 2, As granular activated carbon packed in BPBE Cell, coconut shell was superior to lignite and the removal efficiency was the highest when the activated carbon was 4/6 mesh, the voltage was 20V. 3. When the heavy metallic ion in wastewater was electrolyzed in BPBE Cell of continuous type, about 1,000mg of heavy metal per 1kg of coconut sell could be removed. 4. The treatment method of heavy metallic ion in wastewater by BPBE Cell cost less than in the former chemical treatment method and the coconut shell packed in BPBE Cell could be regenerated by chemical method.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.332-336
• /
• 2007

Pseudomonas stutzeri strain KCCM 34719 was used in this experiment to determine the effects of increasing Pb(II) concentrations on its growth rate. To obtain optimum growth conditions, strain KCCM 34719 was cultivated in nutrient broth under various conditions, such as temperature, pH, and NaCl concentration. Optimal conditions for cell growth were $30^{\circ}C$ of temperature, 8.0 of pH, and 3% of NaCl concentration, respectively. Growth response of bacterial cell to Pb(II) showed tolerance to concentrations ranging from 10 to 100 mg ${\ell}^{-1}$ in liquid culture, following a growth pattern similar to the control. Growth rate was greatly inhibited at 200 mg ${\ell}^{-1}$ of Pb(II).

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1293-1296
• /
• 2006

In this study, a solid phase extraction method has been developed for the preconcentration and separation of the elements Cr(III), Fe(III), Co(II) and Pb(II) at trace levels by using a column packed with Amberlite XAD-1180 resin loaded with 4-(2-pyridylazo)-resorcinol (PAR) reagent. After preconcentrating, the metals retained on the column were eluted with 20 mL of 3 mol/L $HNO_3$ and then determined by flame atomic absorption spectrometry (FAAS). The factors affecting the recovery of the elements, such as pH, type and concentration of eluent, volume of sample and elution solution, and matrix components, were also ascertained. The recoveries of Cr(III), Fe(III), Co(II) and Pb(II) were found to be $99\;{\pm}\;4,\;97\;{\pm}\;3,\;95\;{\pm}\;3$ and $98\;{\pm}\;4$%, respectively, under the optimum conditions at 95% confidence level and the relative standard deviations found by analyzing of nine replicates were $\leq4.4$%. The preconcentration factors for Cr(III), Fe(III), Co(II) and Pb(II) were found as 75, 125, 50 and 75 respectively. The detection limits (DL, 3s/b) were 3.0 $\mu g/L$ for Cr(III), 1.25 $\mu g/L$ for Fe(III), 3.3 $\mu g/L$ for Co(II), and 7.2 $\mu g/L$ for Pb(II). The recoveries achieved by adding of metals at known concentrations to samples and the analysis results of Buffalo river sediment (RM 8704) show that the described method has a good accuracy. The proposed method was applied to tap water, stream water, salt and street dust samples.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.721-725
• /
• 2016

This work focuses on the electrical conduction mechanism in a lead free ($Na_{0.5}K_{0.5}NbO_3$ ; NKN) ceramics system with $LiNbO_3$ content of approximately critical concentration $x{\geq}0.2$. Lead free $(1-x)(Na_{0.5}K_{0.5})NbO_3-x(LiNbO_3)$, $NKN-LN_x$ (x = 0.1, 0.2) ceramics were synthesized by solid-state reaction method. Crystal structures are confirmed by X-ray diffraction. The electric-mechanical bond coefficient $k_p$ decreases and the phase transition temperature $T_c$ increases with increasing x content, as determined by dielectric and piezoelectric measurements. The value of the real dielectric constants ${\varepsilon}^{\prime}$ and $k_BT{\varepsilon}^{\prime\prime}$ showed anomalies around $T_c$ ($462^{\circ}C$ in the NKN-LN0.1 and $500^{\circ}C$ in the NKN-LN0.2). For the ionic conduction of mobile ions, the activation energies are obtained as $E_I=1.76eV$ (NKN-LN0.1) and $E_I=1.55eV$ (NKN-LN0.2), above $T_c$, and $E_{II}=0.78$ (NKNL-N0.1) and $E_{II}=0.81$ (NKN-LN0.2) below $T_c$. It is believed that the conduction mechanisms of NKN-LNx ceramics are related to ionic hopping conduction, which may arise mainly due to the jumping of $Li^+$ ions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.43-50
• /
• 2011

Currently, conventional security methods including IC card or password type method are quickly switched into biometric security systems in various applications and the electrocardiogram (ECG) has been considered as one of novel biometrics way. However, conventional ECG based biometrics used lead II signal which conventionally used for formulaic signal to heart disease diagnosis and it is not suitable for biometrics since it is rather difficult to find consistent features for heart disease patents. To overcome this problem, we developed new biometrics system using ECG lead III signals. For wave extraction, signal peak points are extracted through AAV algorithm. For feature selection, extracted waves are categorized into one of four wave types and total twenty two features including number of vertices, wave shapes, amplitude information and interval information are extracted based on their wave types. Experimental results for thirty-six people showed 100% specificity, 95.59% sensitivity and 99.17% of overall identification accuracy.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.63-73
• /
• 2016

This study defined material and characteristics of 24 glass fragments and 26 whole glass beads. The feature of glass beads shape are divided into 5 types following color, size, weathering condition and manufacturing techniques. Through the chemical composition, the first and second type is soda glass, the third type is potash glass, the fourth and fifth type is lead barium glass. This site showed the aspect that the chemical composition is changed according to the feature of glass shape and was found that various chemical compositions. Looking at the flow of glass culture, the tomb that are lead barium glass IItype and potash glass I, IItype is relatively preceding period and the tomb that are soda glass and lead barium glass IIItype is following period.