• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.306-313
• /
• 2000

The homogenization method and the density function method are common approaches to evaluate the equivalent material properties for design cells composed of matter and void. In this research, using a new topology optimization method based on the homogenized material with a penalty factor and the chessboard prevention strategy, we obtain the optimal layout of a structure for the natural frequency of a designated mode. The volume fraction of nodes of each finite element is chosen as the design variable and a total material usage constraint is imposed. In this paper, the subspace method is used to evaluate the eigenvalue and its corresponding eigenvector of the structure for the designated mode and the recursive quadratic programming algorithm, PLBA algorithm, is used to solve the topology optimization problem.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.5 no.1
• /
• pp.39-51
• /
• 1980

This paper deals with the problem of determining the capacity expansion timing and sizes of conduits and feeder cables for a given cable network configuration of a single exchange ares, which minimizes the present worth of total costs. The planning horizon is infinite and the demand of line pairs at each cabinet is assumed to be determininstically growing. As a solution method, the heuristic branch-and-bound algorithm of Freidenfelds and Mclaughlin is elaborated by adding details and some minor modifications, which generates a good near-optimal solution with far less computation than would otherwise be possible. We also develop a computer program, which is shown to be effective and efficient through the test run of an illustrative example.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.1
• /
• pp.17-28
• /
• 1998

This study suggests a procedure for designing cellular manufacturing systems (CMS) which are combined with automated guided vehicles (AGVs) using a tandem configuration. So far most of the previous studies have dealt with conventional design problems not considering the layout and the characteristics of transporters used in CMS. A mathematical model is developed using the service time to perform material transfers as a suitable meassure. The service capacity of AGVs and space limitations are also reflected in this model. As the model can be shown strongly NP-hard, a heuristic algorithm is presented, in which each cell is temporarily formed using both the set covering model and similarity coefficients, and then locations of the cells are determined by means of tabu search and finally machine perturbations are carried out. An example problem is solved to demonstrate the algorithm developed.

• Structural Engineering and Mechanics
• /
• v.16 no.1
• /
• pp.1-15
• /
• 2003

This paper proposes a new method for the preliminary design of cable-stayed bridges that belong to the radial system subjected to static loads (self weight, traffic loads, concentrated loads, etc). The method is based on the determination of the each time existing relation between the tension forces of the cables and the corresponding bridge-deck deformations, and can be extended on any type of cable layout (fan, parallel, or mixed system). Galerkin's method is used for the final determination of the cable stresses and the bridge deformation. The determination of the equation, which gives the forces of the cables in relation to the deck's configurations, permits us to convert the problem to the solving of a continuous beam without cables.

• International Journal of Contents
• /
• v.11 no.4
• /
• pp.77-85
• /
• 2015

Table detection is a challenging problem and plays an important role in document layout analysis. In this paper, we propose an effective method to identify the table region from document images. First, the regions of interest (ROIs) are recognized as the table candidates. In each ROI, we locate text components and extract text blocks. After that, we check all text blocks to determine if they are arranged horizontally or vertically and compare the height of each text block with the average height. If the text blocks satisfy a series of rules, the ROI is regarded as a table. Experiments on the ICDAR 2013 dataset show that the results obtained are very encouraging. This proves the effectiveness and superiority of our proposed method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.110-119
• /
• 1996

A novel high speed VLSI architecture and its VLSI realization methodologies for a motion estimation processor based on full search block matching algorithm are presentd. The presented architecture is designed in order to be suitable for highly parallel and pipelined processing with identical PE's and adjustable in performance and hardware amount according to various application areas. Also, the throughput is maximized by enhancing PE utilization up to 100% and the chip pin count is reduced by reusing image data with embedded image memories. Also, the uniform and identical data processing structure of PE's eases VLSI implementation and the clock rate of external I/O data can be made slower compared to internal clock rate to resolve I/O bottleneck problem. The logic and spice simulation results of the proposed architecture are presented. The performances of the proposed architecture are evaluated and compared with other architectures. Finally, the chip layout is shown.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.44-48
• /
• 1998

In the buck-boost DC-DC converter which is used at a certain situation such as in factories where loads often change a lot, the switches in the device make big energy loss in operating at Buck-Boost Mode due to hard switching and are affected by lots of stresses which decrease the efficiency rate of the converter. In order to improve this problem, to decrease the loss of snubber and switching, it has been investigated that zero voltage switching mode and zero current switching mode which make the operation of switches with soft switching. For the more sophisticated and advanced device, this paper is presented the Partial Resonant Soft Switching Mode Power Converter which is adapted the power converter having the partial resonant soft switching mode, that makes switches operate when the resonant current or voltage becomes zero by making the resonant circuit partially at turning on and off of the switches with suitable layout of the resonant elements and switch elements in the converter. Also, this paper includes the analysis and simulation of the Partial Resonant type Buck-Boost Chopper.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.793-798
• /
• 1991

Implementation of AGVS (Automated Guided Vehicle System) in CIMS (Computer Integrated Manufacturing System) generally requires substantial study to optimize design and performance of the guide path. Traditional mathematical approaches have been used with limited success to analyze AGVS. These approaches, however, do not provide a practical opportunity to use by path designers. This paper presents a new approach based on Jules in designing and assessing AGV path to have better design of the closed-loop layout. A framework for the approach is proposed and a case study is reported to demonstrate the framework. Deletion of seldom used paths and addition of bypasses to solve the congestion problem are conducted automatically through simulation expefiments. To visualize die results a graphic control program is developed and integrated with AutoMod/AutoGram simulation package.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.145-151
• /
• 1989

A new preprocess technique is presented which can improve the routing efficiency in the gate array layout designs. In order to resolve the cycle problem in the detailed routing, we exchange the logically equivalent pins in each channel. The signal nets are divided, and doubly connected signal net components are removed, so that the increase in the number of tracks can be controlled.

• Steel and Composite Structures
• /
• v.21 no.4
• /
• pp.949-962
• /
• 2016

The braking hose in the automotive hydraulic braking system exhibits the complicated anisotropic large deformation while its movable end is moving along the cyclic path according to the steering and bump/rebound motions of vehicle. The complicated large deformation may cause not only the interference with other adjacent automotive parts but also the durability problem resulting in the fatal microcraking. In this regard, the design of high-durable braking hose with the interference-free layout becomes a hot issue in the automotive industry. However, since it has been traditionally relied on the cost-/time-consuming trial and error experiments, the cost- and time-effective optimum design method that can replace the experiment is highly desirable. Meanwhile, the hose deformed configuration and fatigue life are different for different hose cyclic paths, so that their characteristic investigation becomes an important preliminary research subject. As a preliminary step for developing the optimum design methodology, we in this study investigate the hose deformed configuration and the fatigue life for four representative hose cyclic paths.