• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.819-824
• /
• 2015

Design of the past focusing on molding and system is gradually changed into design focusing on users that reflects design philosophy considering users, and especially, the importance of User Experience Design that is to offer the best experience in using some products or services is realized. This study accessed design based on data having a low effect on function of wearable among changes that UX Design should consider in IoT generation. I think the data is diverse and many existing social commerce app, similar to the layout of the data in IoT devices based on the layout of the interface.Apps that data based model to analyze the layout. and the structure of the UX design were summarized.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.185-191
• /
• 2008

Optimal damping layout of the constrained viscoelastic damping layer on beam is identified with temperatures by using a gradient-based numerical search algorithm. An optimal design problem is defined in order to determine the constrained damping layer configuration. A finite element formulation is introduced to model the constrained layer damping beam. The four-parameter fractional derivative model and the Arrhenius shift factor are used to describe dynamic characteristics of viscoelastic material with respect to frequency and temperature. Frequency-dependent complex-valued eigenvalue problems are solved by using a simple re-substitution algorithm in order to obtain the loss factor of each mode and responses of the structure. The results of the numerical example show that the proposed method can reduce frequency responses of beam at peaks only by reconfiguring the layout of constrained damping layer within a limited weight constraint.

• Smart Structures and Systems
• /
• v.14 no.1
• /
• pp.39-54
• /
• 2014

Node layout optimization of structural wireless systems is investigated as a means to prolong the network lifetime without, if possible, compromising information quality of the measurement data. The trade-off between these antagonistic objectives is studied within a multi-objective layout optimization framework. A Genetic Algorithm is adopted to obtain a set of Pareto-optimal solutions from which the end user can select the final layout. The information quality of the measurement data collected from a heterogeneous WSN is quantified from the placement quality indicators of strain and acceleration sensors. The network lifetime or equivalently the network energy consumption is estimated through WSN simulation that provides realistic results by capturing the dynamics of the wireless communication protocols. A layout optimization study of a monitoring system on the Great Belt Bridge is conducted to evaluate the proposed approach. The placement quality of strain gauges and accelerometers is obtained as a ratio of the Modal Clarity Index and Mode Shape Expansion values that are computed from a Finite Element model of the monitored bridge. To estimate the energy consumption of the WSN platform in a realistic scenario, we use a discrete-event simulator with stochastic communication models. Finally, we compare the optimization results with those obtained in a previous work where the network energy consumption is obtained via deterministic communication models.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.169-176
• /
• 2019

The purpose of this study was to analyze outdoor thermal comfort of apartments planning characteristic of pedestrian height in Beijing, China. Selecting 322 apartment complexes with more than 1000 households and more than 10 buildings(including 10 buildings), mainly in Chaoyang District and Tongzhou District to select 32 basic layout types and then 12 typical layout types were select in 32 basic layout types. Finally, the simulation was conducted for the 12 typical layout types using the micro-climate model ENVI-met to evaluate the wind environment, the thermal environment and the comfort. The results of this study as follows: In the parallel arrangement, it has the best outdoor thermal comfort of Slab-East-Parallel(S/E/P). Next is Slab-South-Parallel(S/S/P), Tower-South-Parallel(T/S/P) in turn. In the stagger arrangement, Mixture-South-North and South Stagger-1(M/S/NSS-1) has the best outdoor thermal comfort and Slab-South-North and South Stagger(S/S/NSS), Tower-South-North and South Stagger(T/S/NSS), Mixture-South-North and South Stagger-3(M/S/NSS-3), Mixture-South-North and South Stagger-4(M/S/NSS-4), Mixture-South-North and South Stagger-2(M/S/NSS-2) in turn. In the cluster arrangement, Mixture-Mixture-Cluster-2(M/M/C-2) has the best outdoor thermal comfort and Mixture-Mixture-Cluster-3(M/M/C-3), Mixture-Mixture-Cluster-1(M/M/C-1) in turn. Due to the low wind speed and high air temperature, it is necessary to consider the layout types that can form the wind road at first, such as Mixture-South-North and South Stagger-1(M/S/NSS-1), Slab-South-North and South Stagger(S/S/NSS) and so on.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.607-623
• /
• 1995

A numerical model of hydraulic resistance by hanging aquaculture facilities is developed and applied to a model basin and a field. A drag stress term formulated by the quadratic law of drag force is introduced Tn the equations of motion for a two-dimensional depth-averaged flow. In the model basin, numerical experiments ave tarried out for the various shape of obstructions, string density and layout of facilities etc.. The flow pattern around the facilities is affected sensitively by the density of string and the layout of facilities. On the other hand, the velocity decay due to the hanging oyster aquaculture facilities is observed in Kamak bay, where the maximum velcocity decay rate is $25\%$ in spring tide. The model is also applied to the field, Kamak bay. The velocity decay rate in the model is comparable with the field measurement data. The velocity decreases around the down-stream area of the facilities, .hut it increases in the other region. The water elevation decreases during the flood and it increases during the ebb.

• CDE review
• /
• v.2 no.1
• /
• pp.26-32
• /
• 1996

신규 차종의 개발시 차량의 exterior/interior의 design concept은 운전석주변의 driving package layout을 어떻게 구성하느냐에 따라 좌우되는 경향이 있다. 그것은 user가 그 차량의 선악의 판단함에 있어서 운전석 주변의 design 및 상품성이 큰 요인으로 작용하여 운전석 주변의 부품과 인간과의 적절한 조화를 이루어야 차량의 concept와 일치하는 최적의 design으로 user의 감성을 얻을 수 있는 것이다. 따라서 본 고에서는 신규 차종의 초기 개발 단계에서 최적의 design 및 상품성을 얻기 위한 보다 효과적인 driving package layout을 설정하기 위해 1차적 3차원 인체모형(3DM, 3-Dimensional Manikin)을 구성하고자 한다. 3DM은 human engineering에 의한 인체 치수와 각 관절의 운동방향 및 범위를 이용하여 인체의 동적 해석을 model을 도상 구현하고 이러한 3DM을 활용하여 조작성, 편의성 등의 package layout을 가시화 해 보고자 한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.610-614
• /
• 1996

In machining muliple components fixed on the same pallet of a NC machine, it is very important to minimize the total time required to finish the machining by carefully determining the component layout on the pallet, and the tool path of NC machine, and the sequence of tools to be used. In this paper, a linear integer programming model is presented to obtain an efficient layout; and a two-phased heuristic algorithm is proposed to minimize the total time for machining multiple components. Numerical examples are given for the case of identical components and nonidentical components, respectively. The result of either case shows significant reduction of 7.2~15.0% in the total time required to finish the machining.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.41-50
• /
• 2012

In this study we first explain details of the semiconductor manufacturing processes and cluster tools. Then we discuss the problems in current fab layout and cluster tool architecture. As a solution to these problems, we propose the ILE (In-Line EFEM) architecture in which wafer movements are conducted through interconnected EFEMs (Equipment Front End Modules) instead of AMHS (Automated Material Handling System). Then we model the pilot ILE system using discrete event simulation and analyze the cycle time. Finally we compare three different scenarios of equipment layout in the ILE system in terms of cycle time.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.2
• /
• pp.38-48
• /
• 2001

Visual and color in Korean newspaper advertisements appeared in transformational advertising (21cm$\times$30.4cm) were analyzed. Data were gathered from 191 advertisements shown on major four daily newspaper; Dong-a, Joong-ang, Chosun and Hanguk from October to December in 2000. From the results of this research, both type of layout and color are proposed more variety by this researcher. Mixed production techniques are used in newspaper advertising. Also, more foreign advertising model are expected near future. Finally, product life cycle have relationship with each layout elements. In other words, based on the stage of product life cycle layout elements are changed respectively.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1976-1979
• /
• 2002

A new and efficient layout object extraction technique is presented in this paper, which is to be used in technology migration or hard-U reuse. The technique models the original polygon layout represented by a set of edges as a set of connected or overlapped rectangles. The rectangle model provides easy and efficient recognition, extraction, resizing, and compaction of layout objects such as transistors, contacts, and wires. Experiments on several designs from simple standard cells to more complex designs using standard and/or custom cells demonstrate the effectiveness of our technique.