• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.14-21
• /
• 1985

In this paper, a new pitch extraction method, the area comparison method, is proposed. By the speech production model, the area of the first peak on a pitch interval of speech signals is emphasized. By using the above characteristics, this method have more advantages than the others for pitch extraction. The defective decision caused by an impulsive noise is minimized and the pre-filtering is not necessary for this rr ethos, because the integration of signals takes place in the process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.75-85
• /
• 1998

This paper presents the procedures and technique of the decision on the decision on the mount in a diesel engine development newly. To assess the vibration chara- cteristics of the engine plus transmission, their inertia moments are calculated for three engine versions. i.e., NA(Naturally Aspirated), TC(Turbocharged) and TCI(Turbocharged and Intercooled). These data are used to determine the mount layout and stiffness values affecting the noise quality of an engine as well as a vehicle. The main purpose of this paper is to design the mount rubber having the optimal stiffness characteristics through the investigation of the calculation results and the mount conditions when an engine is installed in a vehicle using the existing engine mount room. Thus, this paper describes the optimal mount positions, rubber stiffnesses, natural frequency, mode shapes and so on using ADAMS program to apply the newly developed engines to three different vehicles.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.129-138
• /
• 2001

The paper presents an implementation procedure of assembly line for ABS motor, which is composed of four subassemblies-yoke, grommet, housing and armature. The characteristics of ABS motor and its assembly processes are analysed, and the automation possibility of each process is examined in order to decrease assembly time. The assembly machines and facilities are then selected for automatic assembly, and the layout of the selected facilities is determined. Finally, task allocation of each worker is achieved by assembly line balancing to increase assembly productivity and efficiency. The line efficiency is also analyzed using simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.83-87
• /
• 2003

본 논문에서는 안테나의 이득을 극대화하기 위해서 Bluetooth PCB Layout 위에 내장형 마이크로 칩 안테나를 직접 설계하여 Bluetooth의 주요 사양인 2.4~2.4835GHz에서 동작할 수 있도록 Bluetooth용 내장형 마이크로 칩 안테나를 설계하였다. Bluetooth PCB Layout 크기는 실제 크기와 같은 54mm$\times$19mm$\times$2.4mm로 설계하고 마이크로 칩 안테나 크기는 11mm$\times$4mm$\times$l.6mm로 설계하여 상용화 된 프로그램인 HFSS에 의해 3.616dBi의 이득을 얻었다. 설계 제작된 Bluetooth용 내장형 마이크로 칩 안테나는 2.45GHz의 중심주파수에서 넓은 대역폭 10.71%을 확인하였다. 또한, 마이크로 칩안테나에서 용량의 변화와 용량의 위치 변화, 급전점의 위치 변화에 따른 공진주파수, 대역폭, 이득 등의 특성을 비교하였고, 제작된 칩안테나의 측정된 방사패턴에서 E-면과 H-면을 비교 분석했다.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.97-102
• /
• 2004

AGV flowpath layout design is one of the most important steps for efficient AGV systems design. Since it was formulated by Gaskins & Tanchoco (1987), a unidirectional AGV flowpath layout design problem has been tackled by many researchers. However, the solution methods were traded off between the solution quality and the computational time. In this paper, a tabu search technique is applied to obtain a good solution for a relatively large problem in reasonable computational time. Specifically, fast construction algorithm for feasible initial solutions, long-term memory structure and neighbor solutions generation are adapted to the problem characteristics and embedded in the tabu search algorithm. Also, sets of computational experiments show that the proposed tabu search algorithm outperforms to the Ko and Egbelu's algorithm (2003).

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.67-75
• /
• 2006

Multi-family housings caused several problems related to physical form such as isolation of housing estate, inhumanity of the exterior space, and mismatch with the urban structure. To handle these problems, the purpose of this study is to analyse density elements which have a direct impact on physical forms, thereby understand the characteristics of physical form and also identify a meaning of inter-relationships between them. Therefore both formal constituents and density elements are reformed into respective analyzing indices. From the analysis, physical form and the spatial layout of buildings were more uniform in large-scale housing estates than in medium or small housing estates. However, small-scale housing estates showed various form and the spatial layout of buildings in order to increase the building density.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.12 s.243
• /
• pp.1369-1376
• /
• 2005

Effective mixing gives strong advantageous impact on microfluidic applications since mixing is in general very slow process motivated by molecular diffusion transport only on the micro-scale. In this work, the mixing characteristics are analyzed in a Y-channel micromixer with obstacles. For the through analysis, our laboratory in-house unstructured grid CFD code is validated through solving a concentration transport in a uniform microchannel. The solutions well correspond to both exact solutions and those from MemCFD. Mixing in a Y-channel micromixer with obstacles is numerically investigated by the in-house code to search the optimal radius and layout of obstacles. From the simulations, the mixing efficiency appears to be proportional to the magnitude of the formation of lateral velocity component. It is also shown that the asymmetric layout and radius enlargement of obstacles greatly improves mixing efficiency.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.805-812
• /
• 2006

An optimization formulation is proposed to minimize sound pressures in a two-dimensional cavity by controlling the attachment area of unconstrained damping materials. For the analysis of structural-acoustic systems, a hybrid approach that uses finite elements for structures and boundary elements for cavity is adopted. Four-parameter fractional derivative model is used to accurately represent dynamic characteristics oJ the viscoelastic materials with frequency and temperature. Optimal layouts of the unconstrained damping layer on structural wall of cavity are identified according to temperatures and the amount of damping material by using a numerical search algorithm.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.566-574
• /
• 2004

Recently, common users are familiar with the various dynamic displays and interfaces owing to the developments of web browser and Flash. As Flash also has become popular, it has attracted more application of many users, which nowadays makes them focus on the unique characteristics of web - the interactive and dynamic design. Therefore, this dissertation performs the type-analysis of the layouts and the understanding of the actual condition for the existing interactive-sites, followed by the considering of the design-related methodology and the utility of Flash program.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.127-140
• /
• 2001

The purpose of this study is to examine the effect of the style of textile pattern design on the process of building the fashion brand identity. In so doing, the study analyzes the color, style, and layout of the motive, and the drawings of the patter of textile of top seven Italian fashion brands which present in presented eight fashion design collections during the 1997∼2000 period. The results of the analysis show that the seven brands exhibit their unique characteristics of the color, style, and layout of the motive, and the drawings of the pattern of textile. The results can be interpreted in a way that their distinct features oft textile pattern design indeed contribute toward the establishment of their unique brand image and brand identity. The results of this study suggests that to initiate the top fashion brand, the fashion industry should develop its own unique style of textile pattern design.