• Bulletin of the Korean Chemical Society
• /
• 제24권11호
• /
• pp.1561-1562
• /
• 2003

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.306-309
• /
• 2007

In this study, hydroforming characteristic of the double-layered tube was investigated in the hydroforming process. The double-layered tube can be made outer surface on the stainless steel by only one processing. The free bulging test was performed to analysis optimized pressure and axial feeding amount of the double layered tubes. And the experimental results between stainless/carbon and carbon/carbon double-layered tube were compared with the forming data. Moreover analysis model that can be hydroformability and predictable forming pressure of double-layered tube was presented.

• 공업화학
• /
• 제16권1호
• /
• pp.68-73
• /
• 2005

층상 실리케이트를 주형으로 이용하여 실리케이트의 층간에 pyrolized fuel oil (PFO)를 삽입하고 열분해시킨 후 실리케이트 골격을 용출 제거함으로써 다공성 층상카본을 제조하였다. 층상카본의 입자모양은 층상실리케이트 주형과 유사한 판상 형태이며, d-spacing은 0.78~0.82 nm로 일정한 값을 나타내었다. 실리케이트와 PFO의 혼합비율과 열처리 온도, 열처리 시간에 따른 비표면적은 $30{\sim}576m^2/g$로 크게 다른 값을 나타내었다.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.301-311
• /
• 2002

We used diatom and porewater data of two piston cores from the central subbasin and one from the western subbasin in the Bransfield Strait in the northern Antarctic Peninsula to elucidate the depositional mechanism of the layered diatom ooze. The layered diatom ooze is characterized by an abundance of organic carbon, biogenic silica, sulfde sulfur, and lower porewater sulfate concentration. This lack of pore-water sulfate concentration in the diatom ooze interval may reflect development of reducing micro-environment in which bacterially mediated sulfate reduction occurred. The negative relationship between the total organic carbon and sulfate contents, however, indicates that sulfate reduction was partly taking place but does not control organic carbon preservation in this unit. Rather, well-preserved Chaetoceros resting spores in the layered diatom ooze indicate a rapid sedimentation of the diatom as a result of repetitive iceedge blooms on the Bransfield shelf during the cold period (around 2500 yrs BP) when the permanent seaice existed on the shelf, During this period, it is expected that the downslope-flowing cold and dense water was also formed on the Bransfield shelf as a result of sea ice formation, playing an important role for the formation of layered diatom ooze in the Bransfield subbasins.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.375-382
• /
• 2016

The mechanical property of a carbon-fiber-reinforced plastic (CFRP) is subjected to two elements, carbon fiber and polymer resin, in a first step and the selection of multi-layered structure is second one. Many combination of fabric layers, i.e. plainweave, twillweave, can be derived for candidates of test specimen used for a basic mechanical components so that a reliable identification of dynamic nature of possible multi-layered structures are essential during the development of CFRP based component system. In this paper, three kinds of multi-layered structure specimens were prepared and the dynamic characteristics of service specimens were conducted through classical modal test process with impact hammer. In addition, the design sensitivity analysis based on transmissibility function was applied for the measured response data so that the response sensitivity for each resonance frequency were compared for three CFRP test specimens. Finally, the evaluation of CFRP specimen over different multi-layered fabric structures are commented from the experimental consequences.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.9-14
• /
• 1998

Diamond-like carbon(DLC) films were deposited on buffer-layered ZnS substrates by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) method. Ge and GeC buffer layera were used between DLC and ZnS substrates to promote the adhesion of DLC on ZnS substrates. Ge buffer layers were sputter deposited by RF magnetron sputtering and $GeC^1$ buffer layers were deposited by same method except using acetylene reactive gas. The relatinship between film properties and deposition conditions was investigated using gas pressure, RF power and dc bias voltage as PECVD parameters. The hardness of DLC films were measured by micro Vickers hardness test and the adhesion of DLC films on buffer-layered ZnS substrates were studied by Sebastian V stud pull tester. The optical properties of DLC films on butter-layered ZnS substrates were characterized by ellipsometer and FTIR spectroscopy.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.426-430
• /
• 2000

We have studied the field emission characteristics of multi-layered diamond-like-carbon (DLC) films deposited by vertical electrodes type plasma enhanced chemical vapor deposition with CH$_4$ and H$_2$ mixture. We deposited a thin layer of DLC on the p$^{+}$-Si substrate and then turned off plasma before another deposition of a new DLC layer. The thickness and the number of DLC layers are varied. The emission characteristics of multi-layered DLC films were compared with conventional one. The multi-layered DLC film shows higher emission current than conventional one.e.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.237-242
• /
• 2012

We report on the NO gas sensing properties of Al-doped zinc oxide-carbon nanotube (ZnO-CNT) wire-like layered composites fabricated by coaxially coating Al-doped ZnO thin films on randomly oriented single-walled carbon nanotubes. We were able to wrap thin ZnO layers around the CNTs using the pulsed laser deposition method, forming wire-like nanostructures of ZnO-CNT. Microstructural observations revealed an ultrathin wire-like structure with a diameter of several tens of nm. Gas sensors based on ZnO-CNT wire-like layered composites were found to exhibit a novel sensing capability that originated from the genuine characteristics of the composites. Specifically, it was observed by measured gas sensing characteristics that the gas sensors based on ZnO-CNT layered composites showed a very high sensitivity of above 1,500% for NO gas in dry air at an optimal operating temperature of $200^{\circ}C$; the sensors also showed a low NO gas detection limit at a sub-ppm level in dry air. The enhanced gas sensing properties of the ZnO-CNT wire-like layered composites are ascribed to a catalytic effect of Al elements on the surface reaction and an increase in the effective surface reaction area of the active ZnO layer due to the coating of CNT templates with a higher surface-to-volume ratio structure. These results suggest that ZnO-CNT composites made of ultrathin Al-doped ZnO layers uniformly coated around carbon nanotubes can be promising materials for use in practical high-performance NO gas sensors.

• 공업화학
• /
• 제16권3호
• /
• pp.408-412
• /
• 2005

Magadiite 주형에 pyrolized fuel oil (PFO)를 층간 삽입, 열처리하여 층간에 탄소 박막을 형성하고 magadiite 주형을 제거함으로서 다공성 층상탄소를 합성하였다. 층상카본은 주형과 유사한 판상 구조이며, d-spacing은 ~0.7 nm로서 일정한 값을 보여주었다. 비표면적은 주형의 형태, 혼합비율, 소성시간에 따라 $147{\sim}385m^2/g$ 크게 다른 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.866-870
• /
• 2014

In solid oxide fuel cell system, yttria-stabilized zirconia is generally adopted as the electrolyte, which has high strength and superior oxygen ion conductivity, and the air electrode and the fuel electrode are attached to this. Recently, new structure of 'layered planar SOFC module' was suggested to solve the reliability problem due to the high temperature stability of a sealing agent and a binding material. In this study to materialize the air electrode in a layered planar SOFC module, the LSM ink was coated to form homogeneous electrode in the channel after the ink preparation. As the porosity control agent, PMMA or active carbon powder was adopted with use of a commercial dispersant in ethanol. The optimal amounts of both the porosity control agents and the dispersant were determined. Four (4) vol% of the dispersant for the LSM-PMMA case and 15 vol% for LSM-carbon powder showed the lowest viscosities respectively to indicate the best dispersed states of the slurries. With PMMA and carbon powder, sintered LSM ink shows the relatively homogeneous distributions of pores and with increases of the agents, the porosities increased in both cases. From this, it can be thought that the amount of the PMMA or carbon powder could be used to control the porosity of the LSM ink.