• 정보처리학회논문지A
• /
• 제15A권4호
• /
• pp.199-210
• /
• 2008

무선 인터넷 프록시 서버 클러스터링에서 저장공간을 최소화하기 위해서는 URL 해싱기법을 가진 Layer 7 부하분산기가 필요하다. 서버 클러스터 앞단에 위치한 Layer 4 부하분산기는 TCP 또는 UDP와 같은 트랜스포트 계층에서 컨텐츠 내용을 확인하지 않고 사용자 요청들을 똑같은 컨텐츠를 가진 서버들에게 분배한다. 서버 클러스터 앞단에 위치한 Layer 7 부하분산기는 응용계층에서 사용자 요청을 분석하여 요청 컨텐츠 유형에 따라 해당되는 서버들에게 분배한다. Layer 7 부하분산기를 이용하면 서버들이 배타적으로 각기 다른 컨텐츠를 가지게 할 수 있어서 서버들 저장공간을 최소화할 수 있으며 전체 클러스터 성능을 향상할 수 있다. 그러나 Layer 7 부하분산기는 응용계층에서 사용자 요청을 분석하는데 요구되는 큰 처리 부담으로 인해 Layer 4 부하분산기와 다르게 확장성이 제한된다. 본 논문에서는 그 확장성 제한을 극복하기 위해서 분산형 Layer 7 부하분산기를 제안한다. 종래의 방법에서는 한 대의 Layer 7 부하분산기 를 사용하는데 본 논문에서 제안한 방법에서는 서버 클러스터 앞에 한 대의 Layer 4 부하분산기를 설치하고 서버들에게 Layer 7 부하분산기들을 각각 설치한다. 클러스터 기반의 무선 인터넷 프록시 서버에서 종래의 방법을 리눅스기반의 Layer 7 부하분산기인 KTCPVS를 이용하여 구현하였다. 본 논문에서 제안한 방법에서는 리눅스기반의 Layer 4 부하분산기인 IPVS를 사용하고 각 서버들에게 Layer 7 부하분산기인 KTCPVS를 설치하여 같이 동작하게 구현하였다. 실험은 16대의 컴퓨터를 사용하여 수행되었고, 실험 결과에 의하면 제안 방법이 종래 방법에 비해 서버 대수가 증가함에 따라 확장성 및 높은 성능 향상률을 가짐을 확인하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.81-84
• /
• 2000

Two-layer aquifer system with fractional flow dimension is composed of contiguous two layers: Layer 1 (lower layer) and Layer 2 (upper layer) with different permeability and specific storage each other. For this aquifer system, we assume that groundwater flow originates only from Layer 1 on the pumping well. The aquifer system considers wellbore storage and skin effects on the pumping well. Dimensionless drawdown curves for different flow dimensions are analyzed for different lambda (λ, crossflow coefficient) values, kappa ($textsc{k}$, permeability ratio between Layer 1 and Layer 2) values and omega ($\omega$, storativity ratio between Layer 1 and Layer 2) values. The curves for Layer 1 and Layer 2 show characteristic trend each other.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.91-91
• /
• 2011

박막태양전지의 높은 효율개선을 위해 TCO층과 p-layer 사이에 buffer layer를 넣어 Voc와 FF를 개선하는 연구가 진행되고 있다. 이에 buffer layer의 활성화 정도를 높이기 위해 p-layer을 최적화 시키고자한다. 이 실험에서 a-Si:B에 N2O를 도핑시켜 Bandgap Energy 2.0 eV, Activation Energy 0.4 eV인 a-SiOx:B 막을 제작하여 buffer layer로 사용하였고 이 buffer layer에 의한 cell의 효율 향상을 최적화 하기위해 ASA simulation을 이용해 p-layer의 Bandgap Energy와 Activation Energy를 가변 하여 보았다. 실험결과 p-layer의 Bandgap Energy 1.95 eV에서 buffer layer와 p-layer사이에서의 barrier가 최소가 됨을 확인 할 수 있었고 Actication Energy 0.5 eV에서 가장 높은 Voc를 가짐을 알 수 있었다. 본 연구를 통해 p-layer의 Bandgap Energy 1.95 eV, Activation Energy 0.5 eV에서 buffer layer를 활성화시키기 위한 p-layer의 최적화 조건을 구현해 볼 수 있었다.

• 한국농공학회지
• /
• 제16권3호
• /
• pp.3477-3491
• /
• 1974

Following are the results of the study on the property of falling permeation of stratified soil in the close state under existence of stagnant water on a soil layer. 1. When on the stratified soil a least permeating layer was put on the soil layer the load Pressure was present owing to appearance of saturation close state driving decrease of the pressure in the lower layer, on the other hand when the least permeating layer was placed under the layer the lower least permeating layer pressure was decreased. 2. In the case of least permeating layer the variation of current gradient according to the respective level after treating the layer was enormous and due to usal storage phenomena for the Kl layer which was coarse that was trifle. 3. The permeability of the respective layer of stratified soil in the close state died not always coincide with that of single layer. 4. Generally Zunker's equation of average permeability was valid but actually calculated permeating velocity after treating the layer of stratified soil was seriously differ from the measured value owing to the variation of current gradient, especially when the pressure head at the layer boundany was discontinuous the validity of the equation of average permeability was seemed to be doubtful. 5. The permeating velocity of stratified soil was regulated by the least permeating layer, i.e. it is thought to be rational to estimate the value by calculating the current gradient with its proper permeability, pressure headon the layer and its thickness.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.167-176
• /
• 2006

In this paper we show that solutions of the nonlinear Nernst-Planck equation possesses the quadruple-layer structure near the interface when the electrolyte receives a high frequency forcing such as a high-frequency alternating current. Very near to the interface wall, the well-known, classical Stern layer exists. Near to the Stern layer we have the secondly thin layer (to be called inner layer in this paper) where the ion concentrations behave under the same frequency as the external forcing. However, in this layer, the positive and negative ion concentrations develop with the time phase 180-degree different from each other. Next to this second layer, we have the third layer (called middle layer) in which two ion concentrations change with the time period double the forcing, and both concentrations behave in the same time phase. In the outermost layer, i.e. the forth layer, (called outer layer) the ion concentrations show the same-phase development as the third one but decaying very slowly in time. Our assertion is mostly based on the 1-D numerical simulation for the Nernst-Planck equation under a high frequency AC field assuming that the quadruple layer is very thin compared with the length scale representative of the bulk region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.31-32
• /
• 2008

The structure of OLEDs with conventional heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. NPB used as a hole transport layer and DPVBi used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts device's stability. Mixing of the hole transport layerand the emitting layer removes abrupt interface between the hole transport. layer and the electron transport layer. The stability of OLED with graded mixed-layer developed in this study was improved.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.28-32
• /
• 2006

A multi-layer of the dye, natural colorant Berberine, was successfully developed by the self-assembly deposition from water-soluble cationic dye(Berberine chloride) and anionic polyelectrolyte PSS(Polysodium 4-styrenesulfonate) in aqueous solution via electrostatic attraction. The corresponding results on multi-layer were characterized by UV-Vis absorbance measurements. The growth of multi-layer formed by the sequential interaction was also determined. The findings measured by UV-Vis spectrophotometer showed that the bilayer deposition characteristic was linear and highly reproducible from layer to layer.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.121-127
• /
• 1995

We have analyzed the double insulating layer consisting of anodic oxide and ZnS through TEM experiments. The use of double insulating layer for HgCdTe surface passivation is one of the promising passivation method which has been recently studied deeply and the double insulating layer is formed by the evaporation of ZnS on the top of anodic oxide layer grown in H$_{2}$O$_{2}$ electrolyte. The structure of anodic oxide layer on HgCdTe is amorphous but the structure of oxide layer after the evaporation of ZnS has been changed to micro-crystalline. The interface layer of 150.angs. thickness has been found between ZnS and anodic oxide layer and is estimated to be ZnO layer. The results of analysis on the chemical components of ZnS, the interface layer and anodic oxide layer have showed that Zn has diffused into the anodic oxide layer deeply while Hg has been significantly decreased from HgCdTe bulk to the top of oxide layer. The formation of ZnO interface layer and the change of structure of anodic oxide layer after the evaporation of ZnS are estimated to be defects or to induce the defects which might possibly affect the increase of the positive fixed charges shown in C-V measurements of HgCdTe MIS.

• 한국통신학회논문지
• /
• 제34권5C호
• /
• pp.485-497
• /
• 2009

본 논문에서는 이동체에 대한 위성방송 및 인터넷 서비스를 지속적으로 제공하기 위해 기존의 DVB-S2 표준화에 DVB-H와 DVB-T를 결합한 새로운 DVB-S2M 표준화에 대한 연구를 하며, 여기서 생기는 deep fading을 극복하기 위한 방안에 대해 연구하였으며, 새로운 이동형 DVB-S2의 규격은 deep fading으로 인해 physical layer 부호화 방식과 upper layer 부호화 방식을 적용한 cross layer 부호화 방식을 적용시키고, DVB-S2 short frame의 부호화 방식을 physical layer 부호화 방식으로 고정시키고 upper layer 부호화 방식을 변화시키면서 성능 분석하였다. 아울러 이동체의 속도에 따라, 데이터 전송속도, 그리고 packet size에 따라 성능 분석하였다.