• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.555-562
• /
• 2006

This study was conducted to investigate the rheological properties of protein-bound polysaccharide powders (SD-1, 2, 3) using ultrafiltration (UF) and spray drying (SD) process from Agaricus blazei Murill. The calculated weight-average molar mass (Mw) in the positions at 29.7 mL (for SD-1), and at 27.8 mL (for SD-2), and at 18.7 mL (for SD-3) was $8.2{\times}10^3,\;9.6{\times}10^4$, and $5.9{\times}10^6g/mol$, respectively. As concentration increased the solution showed higher pseudoplasticity where the pseudoplasticity decreased as temperature increased. The flow behaviors of spray dried powder solutions were more fitted to Herschel-Bulkley equation than Power law equation. Apparent viscosity of SD-2 was more temperature-dependent than that of SD-1 and 3. However, the SD-3 tended to be more concentration-dependent than SD-1 and 2 as temperature increasing.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.119-125
• /
• 2023

It is necessary to reduce aviation GHG(CO2) emission to ensure aviation sustainable development. Operational improvements may not contribute significantly to carbon reduction but it can sustatially reduce emission in a short term. ICAO has developed GANP and ASBU to optimize operations and countries are making efforts to expand infrastructure and develop technology. The legal barriers to operational improvement are based on the notion of state sovereignty under the Chicago Convention which allows countries to control inefficiencies based on borders or limit or prohibit the passage of aircraft. Chicago Convention does not grant unlimited freedom of air sovereignty and if the concept of state sovereignty is interpreted according to the times it is possible to achieve smooth operational improvement.

• Geomechanics and Engineering
• /
• v.31 no.4
• /
• pp.423-437
• /
• 2022

The objective of the study is to evaluate the feasibility of the dynamic behavior of slope through both 1 g shaking table test and numerical analysis. Accelerometers were installed in the slope model with different types of seismic waves. The numerical analysis (ABAQUS and DEEPSOIL) was used to simulate 1 g shaking table test at infinite boundary. Similar Acceleration-time history, Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) were obtained, which verified the feasibility of modeling using ABAQUS and DEEPSOIL under the same size. The influence of the size (1, 2, 5, 10 and 20 times larger than that used in the 1 g shaking table test) of the model used in the numerical analysis were extensively investigated. According to the similitude law, ABAQUS was used to analyze the dynamic behavior of large-scale slope model. The 5% Damping Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) at the same proportional positions were compared. Based on the comparison of numerical analyses and 1 g shaking table tests, it was found that the 1 g shaking table test result can be utilized to predict the dynamic behavior of the real scale slope through numerical analysis.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.943-946
• /
• 2005

An effective spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR) using molten naphthalene as a diluent has been studied. A red complex of palladium with PAR is formed at 90 ${^{\circ}C}$. In the range of pH 9.0-11.0, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in $CHCl_3$ to be determined spectrophotometrically at 520 nm against the reagent blank. Beer’s law is obeyed over the concentration range of 0.1-2 ${\mu}g{\cdot}mL^{-1}$. The molar absorptivity and Sandell’s sensitivity are 8.0 ${\times}\;10^5\;L{\cdot}mol^{-1}{\cdot}cm^{-}1\;and\;0.49\;{\mu}g{\cdot}cm^{-2}$ respectively. From the results of tolerance limits, it was found that there was no interferences were observed for most of the ions examined and those somewhat high interferences by Co(II), Fe(II) and Bi(III) could be effectively masked by EDTA.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.33-44
• /
• 1998

Mine tailings, soils, stream sediments, and ground water around Imcheon disused mine were analyzed in order to investigate their pollution levels of heavy metals and cyanide. The average contents of As, Cd, Cu, Hg, Pb, Zn, and CN￣ in mine tailings were 366, 28.8, 202, 15.2, 1.97$\times$$10^3$, 3.85$\times$$10^3$, 90.6mg/kg respectively, The pollution indices that calculated by the tolerance level of Kloke were 8~19 and the pH values were acidic in mine tailngs. In the field and paddy soils of Imcheon disused mine area except for soils nearby mine tailngs, concentraitons of the heavy metals were less than standards of soil pollution of agricultral area in the environmental protection law. The nitrate contents In the ground water for drink were more than tolerance level of the drinking water of Ministry of Health and Social Affairs.

• Journal of the Korean earth science society
• /
• v.27 no.4
• /
• pp.475-485
• /
• 2006

The physical properties of the central and southwestern crust of South Korea were estimated by comparing values of ${Q_P}^{-1}\;and\;{Q_S}^{-1}$ in the Kimcheon and Mokpo areas. In order to get ${Q_P}^{-1}\;and\;{Q_S}^{-1}$ values, seismic data were collected from two stations of the KIGAM network (KMC and MUN) and four stations of the KMA network (CPN, KUC, MOP, and WAN). An extended coda-normalization method was applied to these data. Estimates of ${Q_P}^{-1}\;and\;{Q_S}^{-1}$ show variations depending on frequency. As frequencies vary from 3 Hz to 24 Hz, the estimates decrease from $(1.4{\pm}3.9){\times}10^{-3}\;to\;(2.3{\pm}3.5){\times}10^{-4}\;for\;{Q_P}^{-1}\;and\;(1.8{\pm}1.3){\times}10^{-3}\;to\;(1.9{\pm}1.5){\times}10^{-4}\;for\;{Q_S}^{-1}$ in central South Korea, and $(5.9{\pm}4.8){\times}10^{-3}\;to\;(2.2{\pm}3.8){\times}10^{-4}\;for\;{Q_P}^{-1}\;and\;(0.5{\pm}2.8){\times}10^{-3}\;to\;(1.8{\pm}1.6){\times}10^{-4}\;for\;{Q_S}^{-1}$ in southwestern South Korea. According that a frequency-dependent power law is applied to the data, the best fits of ${Q_P}^{-1}\;and\;{Q_S}^{-1}\;are\;0.003f^{-0.49}\;and\;0.005f^{-1.03}$ in central South Korea, and $0.026f^{-1.47}$ and $0.001f^{-0.49}$ in southwestern South Korea, respectively. These values almost correspond to those of seismically stable regions although ${Q_P}^{-1}$ values of southwestern South Korea are a little high due to lack of data used.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.179-187
• /
• 2013

Objective: The purpose of this study is to extract GOMS manual operator, except for an experiment with participants. Background: The GOMS model has advantage of rapid modeling which is suitable for the environment of technology development which has a short life cycle products with a fast pace. The GOMS model was originally designed for desktop environment so that it is not adequate for implementing into the latest HCI environment such as small touch screen device. Therefore, this research proposed GOMS manual operator extraction methodology which is excluded experimental method. And flick Gesture was selected to explain application of proposed methodology to extract new operator. Method: Divide into start to final step of hand gesture needed to extract as an operator through gesture task analysis. Then apply the original GOMS operator to each similar step of gesture and modify the operator for implementation stage based on existing Fitts' law research. Steps that are required to move are modified based on the Fitts' law developed in touch screen device. Finally, new operator can be derived from using these stages and a validation experiment, performed to verify the validity of new operator and methodology by comparing human performance. Results: The average movement times of the participants' performance and the operator which is extracted in case study are not different significantly. Also the average of movement times of each type of view study is not different significantly. Conclusion: In conclusion, the result of the proposed methodology for extracting new operator is similar to the result of the experiment with their participants. Furthermore the GOMS model included the operator by the proposed methodology in this research could be applied successfully to predict the user's performance. Application: Using this methodology could be applied to develop new finger gesture in the touch screen. Also this proposed methodology could be applied to evaluate the usability of certain system rapidly including the new finger gesture performance.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.378-384
• /
• 1971

A new analytical reagent 8-(p-ethylbenzenesulfonamido)quinoline(EBSQ) has been synthesized, and identified its structure. EBSQ forms copper chloroform-soluble complex in a basic solution (pH = 7.5∼10.5). The other optimum conditions for the spectrophotometric study of Cu-EBSQ have been established at 380 $m{\mu}$. Beer's law is followed in the concentration range of 0~44.5 ${\mu}g$ per 10 ml of chloroform. The composition of complex has been found to be $Cu(EBSQ-H)_2$and the over-all instability constant is calculated to be $1.22{\times}10^{-7}$. The absorption coefficient of the $Cu(EBSQ-H)_2$ complex is ${\varepsilon}$ = 15,800.

• Transactions of Materials Processing
• /
• v.3 no.4
• /
• pp.427-439
• /
• 1994

The high temperature deformation behavior of $SiC_p/Al-Si$ composites and Al-Si matrix was studied by hot torsion test in a range of temperature from $270^{\circ}C$ to $520^{\circ}C$ and at strain rate range of $1.2{\times}10_{-3}~2.16{\times}10_{-1}/sec$. The hot restoration mechanisms for both matrix and composites were found to be dynamic recrystallization(DRX) from the investigation of flow curves and microstructural evolutions. The Si precipitates and SiC particles promoted DRX, and the peak strain$({\varepsilon}_p)$ of the composites was smaller than that of the matrix. Flow stresses of $SiC_p/Al-Si$ composites were found to be generally higher than the matrix, but the difference was quite small at higher temperature due to the decrease of capability of load transfer by SiC particles. With increasing temperature, failure strain of matrix and composites are inclined to increase, the increasing value of failure strain for the $SiC_p/Al-Si$ composites was small compared to that of matrix. The stress dependence of both materials on strain rate() and temperature(T) was examined by hyperbolic sine law, $\.{\varepsilon}=A_1[sinh({\alpha}{\cdot}{\sigma})]_n$exp(-Q/RT)

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.264-269
• /
• 2006

Basic rheological data of dandelion leaf concentrates were determined to predict processing aptitude and usefulness of dandelion leaf concentrates as functional food materials. Hot water and 70% ethanol extracts of dandelion leaves were concentrated at 5, 20, and 50 Brix, and their static and dynamic viscosities, and Arrhenius plots were investigated. Most concentrated dandelion leaves extracted with hot water and 70% ethanol showed flow behaviors close to Newtonian fluid based on power law model evaluation. Apparent viscosity of concentrated dandelion leaves extracted with hot water and 70% ethanol decreased with increasing temperature. Yield stresses of concentrated dandelion leaves extracted with hot water and 70% ethanol by Herschel-Bulkley model application were 0.020-0.641 and 0.017-0.079 Pa, respectively. Activation energies of concentrated dandelion leaves extracted with hot water and 70% ethanol were $2.102-32.669{\times}10^3$ and $1.657-5.382{\times}10^3\;J/mol{\cdot}kg$ with increasing concentration, respectively. Loss modulus (G") predominated over storage modulus (G') at all applied frequencies, showing typical flow behavior of low molecular solution. G' and G" of concentrated dandelion leaves extracted with hot water slowly increased with increasing frequency compared to those of concentrated dandelion leaves extracted with 70% ethanol.