• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.113-118
• /
• 2006

A new last design approach based on the Limb line FFD (LFFD) and Scale factor FFD (SFFD) is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the measured foot 3D data and last 3D data. Furthermore, the proposed last data generation system utilizes cross sectional data extracted obtained from the measured 3D foot data. First, the last design rule of the LFFD is constructed on the FFD lattice based on foot last shape analysis. Secondly, SFFD is constructed on the LFFD new lattice based on scale factor deformation. The scale factor is constructed on the boundary edges of polygonized patch and the cross section last data boundary edge of the polygon object. Suppose the two boundary curves have been preprocessed so that they run in the same direction and they forms the SF(Scale Factor). In addition, the control points of FFD lattice are derived with cross. sectional data interpolation methods from a finite set of 3D foot data.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.3
• /
• pp.15-33
• /
• 1990

In recent years, propellers with various blade configurations such as highly skewed propellers are often fitted to ships from the viewpoint of reduction of vibration and noise. In the design of such propellers, design charts based on methodical series tests are to be complemented by theoretical calculations for accurate estimation of propeller open-water characteristics. The author intended to develop a method to estimate propeller open-water characteristics based on Quasi -Vortex - Lattice Method originally developed by Lan for solving planar thin wings, The Quasi - Vortex - Lattice Method has the simplicity and flexibility of Vortex - Lattice Method. Its accuracy is comparable to that of the Vortex - Lattice Method. Converged solution can be obtained with a small number of control points and further, leading edge suction force can be calculated directly. In the present paper, a numerical method to estimate propeller open-water characteristics based on the Quasi - Vortex - Lattice Method is reviewed and its application to marine propellers is described in detail. Comparison of propeller open-water characteristics obtained by the present method with experimental data showed good agreement for a wide variety of propellers including highly skewed propellers.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1541-1545
• /
• 2018

We study lattice thermal conductivity of $Sb_2Te_3$ using molecular dynamics simulations. The interatomic potentials are fitted to reproduce total energy and elastic constants, and phonon properties calculated using the potentials are in reasonable agreement with first-principles calculations and experimental data. Our calculated lattice thermal conductivities of $Sb_2Te_3$ decrease with temperature from 150 K to 500 K. The in-plane lattice thermal conductivity of $Sb_2Te_3$ is higher than cross-plane lattice thermal conductivity of $Sb_2Te_3$, as in the case of $Bi_2Te_3$, which is consistent with the anisotropy of the elastic constants.

• Nuclear Engineering and Technology
• /
• v.31 no.6
• /
• pp.631-637
• /
• 1999

The module LEAPR of NJOY data processing system has been improved to have the capability of computing the thermal elastic scattering cross sections for silicon, which has a diamond-like structure. Silicon lattice was assumed as an fcc lattice with two atoms at each lattice point. The calculation formulas for thermal neutron elastic scattering by silicon were introduced and incorporated into LEAPR, and then the scattering cross sections for silicon were computed. The results were compared with experimental data, and they were found to give a good agreement with experimental data.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.71-79
• /
• 1992

This paper presents a least-square algorithms of lattice structures and their use for adaptive prediction of time series generated from the dynamic system. As the view point of adaptive prediction, a new method of Identification of dynamic characteristics by means of estimating the parameters of linear auto regressive model is proposed. The fast convergence of adaptive lattice algorithms is seen to be due to the orthogonalization and decoupling properties of the lattice. The superiority of the least-square lattice is verified by computer simulation, then predictor coefficients are computed from the linear sequential time data. For the application to the dynamic characteristic analysis of unknown system, the transfer function of ideal system represented in frquency domain and the estimated one obtained by predicted coefficients are compared. Using the proposed method, the damping ratio and the natural frequency of a dynamic structure subjected to random excitations can be estimated. It is expected that this method will be widely applicable to other technical dynamic problem in which estimation of damping ratio and fundamental vibration modes are required.

• The Korean Journal of Applied Statistics
• /
• v.21 no.5
• /
• pp.855-866
• /
• 2008

Recently many small area estimation methods using the lattice data analysis have been studied and known that they have good performances. In the case of using the lattice data which is mainly used for small area estimation, the choice of better neighborhood information system is very important for the efficiency of the data analysis. Recently Lee and Shin (2008) compared and analyzed some neighborhood information systems based on GIS methods. In this paper, we evaluate the effect of various neighborhood information systems which were suggested by Lee and Shin (2008). For comparison of the estimators, MSE, Coverage, Calibration, Regression methods are used. The number of unemployment in Economic Active Population Survey(2001) is used for the comparison.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.31-37
• /
• 1998

A new self-consistent hole mobility model that includes lattice and hole temeprature has been proposed. By including the lattice and hole temperatures as well as the effective transverse field and the interface fixed charge, the model predicted the saturation of hole drift velocity and showed the effects of coulomb scattering, surface phonon scattering, and surface roughness scattering. The calculated data by the model were compared with the reported experimental data and they were shown to agree quite well. The new model is expected to estimate the characteristics of very short channel devices in the in the hydrodynamic model simulation.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.48-53
• /
• 2011

Current trends in propeller design have led to the need for extremely complex blade shapes, which place great demands on the accuracy of design and analysis methods. This paper presents a new proposal for improving the prediction of propeller performance with a vortex lattice method using the lifting surface theory. The paper presents a review of the theory and a description of the numerical methods employed. For 8 different propellers, the open water characteristics are calculated and compared with experimental data. The results are in good agreement in the region of a high advanced velocity, but there are differences in the other case. We have corrected the parameters for the trailing wake modeling in this paper, and repeated the calculation. The new calculation results are more in agreement with the experimental data.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.225-235
• /
• 2009

Lattice process models are used to explain phase transitions in statistical mechanics, a branch of physics. The Ising model, a specific form of lattice process model, was proposed by Ising in 1925. Since then, variants of the Ising model such as the Potts model and the unitary cell model have been proposed. Like the Ising model, it is believed that the more general models exhibit phase transitions on the critical surface, which is based on the mathematical equation. In statistical sense, phase transitions can be simulated through Markov Chain Monte Carlo (MCMC). We applied Swendsen-Wang algorithm, a block Gibbs algorithm, to a general lattice process models and we simulate phase transition phenomena of the unitary cell model.