• Clinics in Shoulder and Elbow
• /
• v.19 no.1
• /
• pp.43-47
• /
• 2016

Many types of osteotomy have been proposed for the treatment of cubitus varus deformity of the elbow, and various methods for fixation of the osteotomy site have also been described. However, no method has been perfect. We treated two cases of cubitus varus elbow deformity with step-cut osteotomy using a new fixation method with two crossing screws and an anatomically designed locking plate. Active assisted elbow range of motion (ROM) exercise was permitted at postoperative 3 days, after removal of the drainage. Preoperative and postoperative humerus-elbow-wrist angles and ranges of motion of the two patients were compared. At 3 months followup, each patient had recovered the preoperative elbow ROM, and achieved the complete bony union of the osteotomy site and proper correction of the cubitus varus deformity. In addition, the appropriate remodeling of the lateral bony protrusion was observed. Therefore, we introduce a new fixation method for achievement of stable fixation allowing immediate postoperative elbow motion after corrective osteotomy for cubitus varus deformity in young adults.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.109-117
• /
• 2018

Objective: To compare head and hand movement patterns during squash forehand motions between experts and less-skilled squash players. Method: Four experts and four less-skilled squash players participated in this study. They performed squash forehand swings and a VICON motion analysis system was used to obtain displacement and velocity data of the head and right hand during the movement. Mann-Whitney U-tests were performed to compare head and hand range of motion and peak velocity, and cross-correlation was performed to analyze the head-hand coordination pattern between groups in three movement directions. Results: In terms of head and hand kinematic data, experts had greater head range of motion during down swings than less-skilled squash players. Experts seemed to reach peak hand velocity at impact by reaching peak head velocity followed by hand peak velocity within a given temporal sequence. In terms of head-hand coordination patterns, both groups revealed high positive correlations in the medial-lateral direction, indicating a dominant allocentric coordination pattern. However, experts had uncoupled coordination patterns in the vertical direction and less-skilled squash players had high positive correlations. These results indicate that the head-hand movement pattern likely an important factor squash forehand movement. Conclusion: Analysis of head and hand movement patterns could be a key variable in squash training to reach expert-level performance.

• The Journal of Korean Physical Therapy
• /
• v.20 no.3
• /
• pp.29-34
• /
• 2008

Purpose: The purpose of this study was to identify the effect of anterolateral (45$^{\circ}$) and lateral (90$^{\circ}$) direction resistance, with using an elastic band, on the electromyographic(EMG) activity ratio of the vastus medialis oblique (VMO) and the vastus lateralis (VL) during squat exercise. Methods: The study subjects were 19 active people with no history of patellofemoral pain, limitation of range of motion or pain when performing squat exercise. A 'repeated measures within subjects' design was used. The subjects were asked to perform three repetitions of a 90$^{\circ}$ knee flexion squat exercise with anterolateral (45$^{\circ}$) and lateral (90$^{\circ}$) resistance and without resistance, respectively. The EMG activity of the VMO and VL were recorded by surface EMG electrodes and the results were normalized by the % MVIC value. Results: Repeated measures ANOVA's revealed that squat exercise with anterolateral (45$^{\circ}$) resistance produced significantly greater VMO/VL EMG activity ratio than that with lateral (90$^{\circ}$) resistance and without resistance (p=.013). Yet the result of contrast testing revealed that squat exercise with lateral (90$^{\circ}$) resistance showed no significant difference of the VMO/VL EMG activity ratio, as compared with squat exercise without resistance (p>0.05). Conclusion: The findings of this study suggest that squat exercise combining anterolateral (45$^{\circ}$) resistance can contribute positively to the patients with patellofemoral pain as they increase the VMO/VL EMG activity ratio.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.269-279
• /
• 2011

This study was analyzed the characteristics on the stability of posture while conducting a through two and half rotation technic of pench$\acute{e}$ in rhythmic gymnastics. Two rhythmical gymnastics player(LKH and SSJ) who is a member of the national team were selected, and for obtain the kinematic and kinetic variables were used a ProReflex MCU 240 infrared camera(Qualisys, Sweden) and a Type9286A force platform(Kistler, Switzerland). The mechanical factors were computed by using Visual3D program and Matlab R2009a. During the landing and rotation phase the results showed following characteristics; 1) In medial-lateral and horizontal displacement of the support foot, LKH showed smaller movement than SSJ, but SSJ showed smaller movement than LKH in swing foot. LKH showed bigger movement in medial-lateral axis of COP and vertical axis of COG, but SSJ showed bigger movement in horizontal axis of COP and medial-lateral axis of COG. 2) SSJ showed bigger maximum horizontal and vertical velocity at P1 and P2 than LKH. 3) In the inclination angle of COP and COG, SSJ showed smaller change than LKH, but within medial-lateral tilt of the shoulder, LKH performed rotation motion in horizontal position than SSJ. There was no differences in each force components during rotation, but on landing phase, the results showed a characteristic that SSJ exerted bigger breaking force and vertical force than LKH.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.7 no.1
• /
• pp.103-112
• /
• 2012

Objectives : This study was performed to report the effect of oriental medical treatments on the 4 patients with lateral epicondylitis of the elbow. Methods : The 4 patients were treated by Bee Venom acupuncture, Dong-Qi acupuncture, acupuncture on tender points of the origin of the extensor carpi radialis and taping on the extensor carpi radialis. The state of patients was measured by visual analog scale(VAS), elbow range of motion(ROM) and patient's subjective symptom grade(PSSG). Results : After mean 9.5 times of treatments, the recovery of elbow ROM was measured and significant pain relief was seen as the average of VAS changed from 10 to 1.25 and average of PSSG changed from 2.75 to 0.5 grade. Conclusions : These results suggest that oriental medical treatments including Bee Venom acupuncture, Dong-Qi acupuncture, acupuncture, taping are effective to improve the lateral epicondylitis of the elbow.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.422-428
• /
• 2019

A tailless or Blended-Wing-Body(BWB) shaped configuration is highlighted for UCAV with low RCS characteristics. The BWB configuration is characterized by its directional static instability and low controllability. To control the directional movement of the BWB configured vehicle, directional thrust vectoring equipment or drag rudder typed control surfaces which utilize the drag differences of the wing can be considered. This paper deals with a BWB shaped configuration using a spoiler and describes the lateral-directional aerodynamic characteristics of the vehicle. In addition, it is shwon that the lateral-directional motion can be controlled effectively by using the classical PI control structure. This control law is verified by flight test and showed adequate for the tailless BWB shaped UAV.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.37-47
• /
• 2023

A new clamped mechanical splice system was proposed to develop structural performance and constructability for precast concrete connections. The proposed mechanical splice resists external loading immediately after the engagement. The mechanical splices applicable for both large-scale rebars for plants and small-scale rebars for buildings were developed with the same design concept. Quasi-static lateral cyclic loading tests were conducted with reinforced and precast concrete members to verify the seismic performance. Also, shaking table tests with three types of seismic wave excitation, 1) random wave with white noise, 2) the 2016 Gyeongju earthquake, and 3) the 1999 Chi-Chi earthquake, were conducted to confirm the dynamic performance. All tests were performed with real-scale concrete specimens. Sensors measured the lateral load, acceleration, displacement, crack pattern, and secant system stiffness, and energy dissipation was determined by lateral load-displacement relation. As a result, the precast specimen provided the emulative performance with RC. In the shaking table tests, PC frames' maximum acceleration and displacement response were amplified 1.57 - 2.85 and 2.20 - 2.92 times compared to the ground motions. The precast specimens utilizing clamped mechanical splice showed ductile behavior with energy dissipation capacity against strong motion earthquakes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.832-838
• /
• 2021

Recently, reports of marine accidents of small fishing vessels less than 10 tons have been increasing. In this study, the characteristics of the motion response in regular waves were analyzed using computations for these ships. Small vessels less than 10 tons are classified by size and used for marine accident investigations. Therefore, the motion response analysis was performed on three small fishing vessels of different sizes. In the case of the head sea, it was confirmed that as the speed of the vessel increased in the long wavelength region, the motion responses of heave and pitch became large. The motion response of the smallest 3-ton fishing vessel was greater than that of the other sizes of fishing vessels. The maximum value of the roll motion shifted to the long wavelength region as the speed gradually increased in the bow sea, regardless of the size of the ship. In all the three small fishing vessels, it was found that the roll motion was the greatest at 15 knots, the highest speed in both bow and beam seas. When sailing in the head sea and bow sea conditions, lowering the speed is one of the effective approaches to reduce the effects of the vertical and lateral plane motions. The roll motion caused by the beam wave showed a tendency to increase rapidly only at a specific wavelength regardless of the speed and the size of the vessel. It was confirmed that the roll motion was significantly reduced with forward speed in the stern wave compared to the bow wave. As there is a specific region where the maximum value of the hull motion response appears depending on the size and speed of the ship, an operation method that can minimize the effect of this motion should be considered and implemented.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.310-319
• /
• 2016

This paper proposes an effective FRUC (Frame Rate Up-Conversion) technique, which is based on ROI (Region Of Interest) separations and adaptive motion vector refinement. In this paper, in order to overcome the weakness of the EBME (Extended Bi-lateral Motion Estimation) algorithm, which is widely known in FRUC techniques, first, the proposed algorithm performs a bi-directional motion estimation for the complementary asymmetric region. Then, the proposed algorithm classifies each block into ROI or non-ROI block and refine motion vectors in accordance with their block characteristics to have a higher accuracy than the conventional EBME algorithm, specially, for the occlusion regions. The experimental results show that the proposed algorithm can improves 0.59dB on average PSNR as compared to the conventional method.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.239-246
• /
• 2019

This study aims to examine the correlation between pectoralis minor, shoulder mobility, and neck range of motion on rounded shoulder posture for Life-care increase in Women university student. The 80 female adults with rounded shoulder posture were selected for this study. Measurements of shoulder height were obtained by measuring the rounded shoulder posture using a caliper. To measure the length of pectoralis minor, a tape measure was used to measure from the point where the 4th rib and sternum meets to the inferior medial side of coracoid process. Shoulder mobility was measured by holding fists in both hands, then raising one side of the elbow until the palm on that side can be placed on the back, while lowering the other side of the elbow until the back of the hand on that side can be placed on the back. Neck range of motion was used to measure the neck movement including the flexion and the extension, lateral flexion to the right or to the left, and rotation to the right or to the left. The results of this study showed that there are significant negative correlations between pectoralis minor index, shoulder mobility, and neck range of motion in rounded shoulder posture(p<0.05). From these results, in female students with rounded shoulder, the lateral flexion of the neck to the left decreased as the left shoulder mobility increased, the neck extension decreased as the right pectoralis minor shortened, and the rotation of the neck to the left decreased as the left shoulder mobility increased.