• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.139-144
• /
• 2005

A vehicle cruise control algorithm using an Interacting Multiple Model (IMM)-based Multi-Target Tracking (MTT) method has been presented in this paper. The vehicle cruise control algorithm consists of three parts; track estimator using IMM-Probabilistic Data Association Filter (PDAF), a primary target vehicle determination algorithm and a single-target adaptive cruise control algorithm. Three motion models; uniform motion, lane-change motion and acceleration motion. have been adopted to distinguish large lateral motions from longitudinal motions. The models have been validated using simulated and experimental data. The improvement in the state estimation performance when using three models is verified in target tracking simulations. The performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. These simulations show system response that is more realistic and reflective of actual human driving behavior.

• Archives of Reconstructive Microsurgery
• /
• v.15 no.1
• /
• pp.33-37
• /
• 2006

Purpose: The aim of this study was to evaluate the efficacy of lateral middle phalangeal finger flap for pulp and palmar defect of the finger. Materials and methods: We performed the lateral middle phalangeal finger flap in thumb pulp defect 4 cases and the palmar defect of other finger 3 cases. Mean age was 38(25-53) years old and there were male 6 cases and female 1 case. Sensate flap was performed in 4 cases of thumb pulp defects. Mean follow-up period was 14(7-22) months. Results: All flaps were survived. Mean static two-pint discrimination of sensate flap 4 cases was 8(6-10) mm. The sensation of donor finger tip was normal in all cases. Limitation of range of motion of the donor fingers was absent. Patients complained of transient cold intolerance 1 month after surgery but didn't complain of that in all cases at last follow-up. Conclusions: The advantages of the lateral middle phalangeal finger flap are the preservation of the ipsilateral palmar digital nerve, good sensory reconstruction of the fingertip, well maintained donor finger mobility with minimal exposure of the extensor tendon, cosmetically good appearances of donor finger, and easy raising as a large flap. So we suggest that this flap is versatile for reconstructing of relatively large pulp defect of the thumb and the palmar defects involving the joint of finger.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.255-260
• /
• 2014

The acute lumbar pain patients who were unavoidable to take MRI examination were made to take altered lateral recumbent position. they were also not able to control their painfulness and to be in supine position. In this study, it is supposed to increase success rate of the MRI examination through taking the altered lateral recumbent position in using spine and body matrix coil. This altered position made relaxing lumber pain and fatigue for the patients who suffered from sever lumber pain. In these reasons, it decreases the motion artifacts through correcting uncomfortable posture. As a result, qualitative analysis for the image quality was estimated to have average points of supine position A group(lateral recumbent position) of normal candidates and B group(lateral recumbent position) of the abnormal candidates who have sever pain at 4.64, 3.44, and 3.40, respectively. In conclusion, while qualitative analysis in the examination with supine position of the normal patients had significantly high points, the qualitative analysis in the examination with lateral recumbent position of the normal patients and abnormal patients who had sever lumbar pain was almost same. In addition, it was judged that radiologists' imagery interpretation had no other problems in the image evaluation of B group who had acute lumbar pain of abnormal patients. Hereupon, if this technique becomes generalized for the patients who suffer from supine position in the examination, it is supposed to be useful in medical field.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.29-42
• /
• 1999

An accurate method of estimating ship maneuverability needs to be developed to evaluate precisely and improve the maneuverability of ships according to the water depth. In order to estimate maneuverability by a mathematical model. The hydrodynamic forces acting on a ship hull and the flow field around the ship in maneuvering motion need to be estimated. The ship speed new the berth is very low and the fluid flow around a ship hull is unsteady. So, the transient fluid motion should be considered to estimate the drag force acting on the ship hull. In the low speed and short time lateral motion, the vorticity is created by the body and grow up in the acceleration stage and the velocity induced by the vorticity affect to the body in deceleration stage. For this kind of problem, CFD is considered as a goof tool to understand the phenomena. In this paper, the 2D CFD code is used for basic consideration of the phenomena to solve the flow in the cross section of the ship considering the ship is slender and the water depth is large enough. The flow fields Added and hydrodynamic forces for the some prescribed motions are computed and compared with the preliminary experiment results. The comparison of the force with measurement is shown a fairly good agreement in tendency. The 3D Potential Calculation based on the Hess & Smith Theory is employed to predict the surge, sway added mass and yaw added moment of inertia of hydrodynamic coefficients for M/V ESSO OSAKA according to the water depth. The results are also compared with experimental data. Finally, the sway added mass of hydrodynamic coefficients for T/S HANNARA is suggested in each water depth.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.2
• /
• pp.64-72
• /
• 1998

Dynamic response analysis is carried out for slender marine structures such as tensioned risers and tethers of tension leg platform, which are subjected to floating vessel motions as well as environmental forces arising from ocean waves. A mumerical analysis procedure is developed by using finite element model of the structural member. Dynamic analses are performed in the time domain for regular waves. Parameter studies are carried out to highlight the effects of surface vessel motions on the lateral dynamics of the structures. Example results of displacements, bending stresses are compared for various in water depth, environmental condition and vessel motion. Some instability conditions of the structures due to time-varying tension by vessel heave motion are discussed through the example analyses. As the results, the interaction between vessel surge and heave motions amplifies the total structural response of a riser. In the case of a tether, the effect of vessel heave motion during heavy storm is seemed to be quite significant to lateral response of the structure.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.1
• /
• pp.125-138
• /
• 2024

Purpose: The aim of this study was to apply suboccipital muscle inhibition combined with neck muscle stabilization exercise to 20~30s IT industry employees who suffer from chronic non-specific neck pain. Methods: This study was designed as single-blind and randomized controlled trial. The study participants were 20~30s IT industry employees with chonic non-specific neck pain (VAS 3/10) who were divided into an experimental group (n= 20) subjected to suboccipital muscle inhibition with neck muscle stabilization exercise, and control group (n= 20); suboccipital muscle inhibition only. The intervention was applied three times per week for eight weeks. The neck pain·pressure pain threshold·range of motion, and disability index were measured at the 1st, 8th, and 10th week at follow up, then analyzed with an analysis of variance(ANOVA) using the SPSS program. Results: The total number of study participants was 37 (experimental group 19, mean age 34.6±5.3, control group 18, mean age 35.7±4.9). The comparison and analysis of change in VAS, the pressure pain threshold, and the range of motion except the extension (p>.05) revealed a statistically significant decrease between groups over eight weeks and follow up measurement (p<.01). Regarding the within the group differences, the right side of the neck pressure pain threshold showed a statistically significant decrease over eight weeks in the control group (p<.01). The right and left lateral flexion, and the right and left rotation were statistically significant for the experimental group over eight weeks and follow up measurement, but only the left lateral flexion (p<.05) for the control group over eight weeks. The neck disability index showed a slight decrease but this was not satistically significant for the between-grop or the within-group differences (p>.05). Conclusion: The intervention of suboccipital muscle inhibition and a neck muscle stabilization exercise are more beneficial for neck pain and the range of motion than the application of suboccipital muscle inhibition alone.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.91-97
• /
• 2013

Quantifying the nanoscale force between the atomic force microscopy (AFM) probe of a force-sensing cantilever and the sample is one of the challenges faced by AFM researchers. The normal force calibration is straightforward; however, the lateral force is complicated due to the twisting motion of the cantilever. Force measurement in a liquid environment is often needed for biological applications; however, calibrating the force of the AFM probes for those applications is more difficult owing to the limitations of conventional calibration methods. In this work, an accurate nondestructive lateral force calibration method using multiple pivot loading was proposed for liquid environment. The torque sensitivity at the location of the integrated probe was extrapolated based on accurately measured torque sensitivities across the cantilever width along a few cantilever lengths. The uncertainty of the torque sensitivity at the location of the integrated tip was about 13%, which is significantly smaller than those for other calibration methods in a liquid environment.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.63-72
• /
• 2001

In this paper, to satisfy the safety and economy immediately, we assume the center of lateral load in case the dynamic motion of the torsionally unbalanced structure is transformed into the static lateral load using modal analysis and proposes a method to control the design eccentricity in order to make the center of lateral load coincide with the center of strength. And when the structure is designed by proposed method, it is shown that the structure designed by proposed method does not demand excessive additional ductility in comparison with the structure designed by provisions of other seismic building code.