• 터널과지하공간
• /
• 제16권4호
• /
• pp.288-295
• /
• 2006

본 연구에서는 발파 및 지진발생으로 인한 횡방향 지반진동에 대하여 KTX 차량 및 부산지하철을 대상으로 주행안전성을 평가하였다. 이를 위하여 휠/레일 상호작용 해석 WERIA프로그램인 프로그램을 이용하여 철도차량의 동적거동을 시뮬레이션 하였다. 또한 횡방향 지반진동이 철도차량에 유발할 수 있는 차륜/레일간의 큰 상대변위를 고려하기 위하여 차륜/레일간 접촉면의 기하학적 형상과 크리프힘을 반영하였다. 입력하중은 국내의 내진규정 특성에 부합하는 인공지진과 공사중 발생하는 발파진동을 사용하였다. 해석 결과 차륜/레일간의 상대변위와 탈선계수를 산정하여 철도 차량의 주행안전성을 평가한 결과 탈선가능성은 없는 것으로 나타났다.

• 한국지리정보학회지
• /
• 제10권1호
• /
• pp.124-135
• /
• 2007

본 연구는 SMS의 RMA-2를 이용한 하천흐름 해석에서 WMS HEC-1으로 모의된 하천 본류 및 지류의 수리량을 동적인 경계 입력자료로 하여 다양한 시나리오별로 하천내의 흐름 영향을 파악하고자 하였다. 안성천 유역의 공도와 평택수위관측소 구간(10.5km)에 대하여 WMS로 모의한 50, 100, 500, 1,000년 빈도별 시단위 유량을 본류 및 3개 지류의 유량 경계조건으로 적용하여 하천의 수리학적 특성을 분석하였다. SMS RMA-2의 동적 조건(dynamic type)으로 구동한 결과, 하천 본류구간의 시간별 수위 및 유속분포를 모의할 수 있었다. 빈도를 증가시킬수록 측점별 평균유속과 수위가 증가함을 확인할 수 있었으며, 특히 지류가 유입되는 본류지점의 가까운 하류부에서 하천 폭이 좁으면 유속이 크게 증가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1195-1205
• /
• 2008

Composite piles have been used in ground conditions where conventional piles are unsuitable or uneconomical. They may consist of a combination of timber and concrete pile in Europe. One method of doing this was to drive a steel tube to just below water level, and a concrete pile was lowered down it and driven to the required level where corrosion was susceptible in U.K. Recently, a fiber reinforced polymer (FRP) composite pile was developed to use in many marine locations for piers and waterfront buildings in the USA(Hoy, 1995; Phair, 1997). A steel composite (SC) pile reinforced concrete spun pile with steel tube was also proposed and used for the foundation acting a high lateral earthquake load. Composite piles have been developed and researched to increase lateral resistance or to prevent corrosion in marine structures. In paper, the composite pile consisting of the steel upper portion and the concrete lower portion is proposed and are carried out several tests to confirm the capacity of the pile such as lateral load test, dynamic load tests and bending test. It is noted that the composite pile would be a economical pile being capable of increasing lateral resistance.

• 한국공간구조학회논문집
• /
• 제23권3호
• /
• pp.71-78
• /
• 2023

Recently, Free-Form and Irregular Shape high-rise buildings are constructed by IT technology development. Tilted shaped high-rise building which is one of Irregular shape high-rise buildings can cause lateral displacement by gravity load and lateral load due to tilted elevation shape. Therefore, it is necessary to review the behavior and structural aspects of the Tilted shape high-rise building by gravity load. In this paper, the dynamic characteristics of a tilted structure with a dual-core were analyzed with the core location as a design variable, and response behavior, vulnerable members, and vulnerable layers to earthquake loads were analyzed. As a result of the analysis, as the location of the core moved in an tilted direction, the eccentric distance and eccentric load decreased, reducing the axial force of the vertical members. However, the location of the core had little effect on the response.

• 한국지진공학회논문집
• /
• 제11권1호
• /
• pp.29-35
• /
• 2007

본 연구에서는 반복 횡하중을 받는 콘크리트충전 탄소섬유튜브기둥의 휨성능 평가실험을 수행하였다. 시험체의 단면형상은 각형과 원형이며 탄소삼유튜브의 두께 및 와인딩각도(winding angle)를 실험변수로 채택하였다. 모든 시험체는 건물의 한 층 높이와 유사한 높이를 갖는 full scale 크기로 제작되었으며 3대의 가력기(actuator)를 동시에 가동시켜 축하중과 횡하중을 가력하였다. 실험결과를 분석하여 기둥의 휨강도, 변형능력 및 에너지소산능력을 평가하였으며, 횡하중에 대한 기둥의 연성거동 또한 평가되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2237-2242
• /
• 2011

Anomalous scaling behaviors such as significantly large growth exponent (${\beta}$) and small reciprocal of dynamic exponent (1/z) values for many molecular crystalline thin films have been reported. In this study, the variation of scaling exponent values and consequent growth behaviors of molecular thin films were more quantitatively analysed using a (1+1)-dimensional surface lateral diffusion model. From these simulations, influence of step edge barriers and grain boundaries of molecular thin films on the various scaling exponent values were elucidated. The simulation results for the scaling exponents were also well consistent with the experimental data for previously reported molecular thin film systems.

• Architectural research
• /
• 제3권1호
• /
• pp.53-60
• /
• 2001

The proposed building upgrading technique employs prestressing cables to function as bracing to improve the seismic performance during future events. A four-story reinforced concrete moment resisting frame damaged from an ultimate limit state earthquake is assessed and upgraded using the proposed technique. Both existing and upgraded buildings are evaluated in regard of seismic performance parameters performing static lateral load to collapse analysis and dynamic nonlinear time history analysis as well. To obtain realistic comparison of seismic performance between existing and upgraded frames, each frame is subjected to its critical ground motion that has strength demand exceeding the building strength supply. Furthermore, reliability of static lateral load to collapse analysis as a substitute to time history analysis is evaluated. The results reveal that the proposed upgrading technique improves the stiffness distribution compared to the ideal distribution that gives equal inter-story drift. As a result, the upgraded building retains more stories that contribute to energy dissipation. The overall behavior of upgraded building beyond yield is also enhanced due to the gradual change of building stiffness as the lateral load increases.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.295-302
• /
• 2001

The lateral stability of curved continuous welded rail (CWR) is studied fur buckling prevention. This study includes the influences of vehicle induced loads on the thermal buckling behavior of straight and curved CWR tracks. quasi-static loads model is assumed to determine the uplift region, which occurs due to the vertical track deformation induced by wheel loads of vehicle. Parametric numerical analyses are performed to calculate the upper and lower critical buckling temperatures of CWR tracks. The parameters include track lateral resistance, track curvature, longitudinal stiffness, tie-ballast friction coefficient, axle load, truck center spacing, and the ratio of lateral to vertical vehicle load. This study provides a guideline for the improvement or stability for dynamic buckling in on tracks.

• 한국공간구조학회논문집
• /
• 제19권3호
• /
• pp.41-50
• /
• 2019

The stone pagoda continued to be damaged by weathering and corrosion over time, and natural disasters such as earthquake are accelerating the destruction of cultural properties. Stone pagoda has discontinuous structure behavior and is very vulnerable to the seismic load acting in lateral direction. It is necessary to analyze various design variables as the contact surface characteristics play an important role in the dynamic behavior of stone pagodas. For this purpose, contact surface characteristics of stone pagoda can be classified according to surface roughness and filler type, and representative model is selected and structural modeling and analysis are performed using the discrete element method. Also, the seismic load according to the repetition period is calculated and the dynamic analysis is performed considering the discontinuous characteristics of the stone pagoda. Finally, the seismic behavior characteristics can be analyzed by the evaluation of stresses, displacements and structural safety.

• 한국지반공학회논문집
• /
• 제35권6호
• /
• pp.39-48
• /
• 2019

본 연구는 원심모형실험을 이용해 건조 사질토 지반에 근입된 모노파일의 수평 반복하중에 대한 거동을 연구하였다. 실험에 사용된 지반 시료는 상대밀도 80%에서 마찰각이 $38^{\circ}$인 건조 주문진 표준사를 사용했다. 실험 과정은 우선 반복하중의 크기를 결정하기 위해 정적 하중 실험을 수행하여 극한하중을 결정하였다. 이를 통해 도출된 극한 하중 값의 30%, 50%, 80%, 120%을 반복하중의 값으로 결정하였고, 반복횟수는 100회로 수행되었다. 이 결과를 통해 실험 반복하중 p-y 곡선을 산정하였고 도출된 하중 별 최대 지반반력점들을 이용하여 깊이 별 반복하중 p-y 중추곡선을 도출하였다. 이를 기존 p-y 곡선과 비교 결과, 동일 깊이에서 초기기울기가 API(1987) p-y 곡선보다 과소평가 되었으며, 극한지반반력은 과대평가되었다. 또한, 동적 p-y 곡선과 비교하였을 때, 동일 깊이에서의 반복하중 p-y 중추곡선의 초기기울기와 지반반력이 작게 평가되었다. 이는 말뚝이 받는 하중 조건에 따라 p-y 곡선을 다르게 적용해야 할 것으로 판단된다.