• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.357-360
• /
• 2015

For the last 40 years, the Korean government has built and supplied diverse public facilities. The Korean government, which has supplied diverse public facilities for the last 40 years, has maintained these public facilities as breakdown maintenance under limited budget. Because of increase of aging of public facilities and insufficient budget, it needs the total public facility maintenance. Especially, as Japan has also experienced similar issues and solved these, they are the introduction of P-FM theory and see successful examples. In this study, by comparison Analysis on the Merits and Demerits for Public Facility management (P-FM) between domestic and abroad, it would find a future direction to public facility management P-FM is to go.

• Korean Journal of Adult Nursing
• /
• v.12 no.4
• /
• pp.560-572
• /
• 2000

This study was designed to offer descriptive data for nursing intervention for relief of fatigue and pain, and to distinguish by the characteristic difference and the symptoms such as fatigue and pain on Ankylosing Spondylitis (AS), Fibromyalgia(FM), and Systemic Lupus Erythematosus(SLE) patients. The sample consisted of 92 patients(AS 29; FM 30; SLE 33) who visited H-University Rheumatism Hospital in Seoul. The data were collected by a structured questionnaire from May 1, 1999 to April 30, 2000. The results were as follows: Patients of 95% experienced fatigue in the last week and a fatigue score of three disease groups were above average. The fatigue score of FM patients was highest in the other disease, but which was not a statistically significant difference(F=1.417, p=.248). The mean score of AS and FM patients in pain was higher than the SLE patients, and there was the statistical significance among the three groups on pain (F=8.239, p=.001). There wasn't a statistical difference among three groups on coping wtih pain(F=1.451, p=.240). There wasn't any correlation between fatigue and pain in each disease (AS: r=.008, p=.966; FM: r=.328, p=.077; SLE: r=.237,p=.185). Therefore, morning stiffness and pain management during sleeping is needed through good body alignment in the AS patients. Adequate rest for fatigue and multiple coping strategies for pain maybe basic nursing intervention in FM and SLE. According to their fatigue rhythm, a regular exercise program is needed for rheumatic disease because they complained of fatigue above average and their fatigue was repeated better and worse only during the one week.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.753-762
• /
• 2004

its digests on the performance of broiler chicks and taurine content in broiler meat. A total of 100 broiler chickens were assigned to five dietary treatments; Control, PM diet(FM), NaOH treated FM diet(NaOH-FM), HN03 treated FM diet(HN03 - FM) and 0.5% synthetic taurine supplemented diet(Taurine). Treated diets were supplemented with FM or FM digests at the level of 5% to the control diet Treated diets were fed during the last 3wks of 6wks feeding. During the finisher period, weight gain of chicks fed FM treatments tended to decrease in general. Feed intakes of FM and Taurine were significantly lower than the control but were not significantly different from NaOH - FM or HN03- PM. Feed conversion rate(feed intake/gain) of NaOH-FM was significantly higher than those of FM and HNOJ - FM but not different from those of the control and Taurine. Taurine content of the control was highest in heart muscle(1482 J1.g/g) followed by leg muscle(778f.lg/g) and breast muscle(79 J1.g/g). Taurine contents of leg and breast muscle were significantly(P< 0.01) affected by treatments but that of heart muscle was not. Taurine content of Taurine treatments was highest in both leg and breast muscle. Taurine content of leg muscle was increased 170"10 by Taurine supplementation, 123% by FM supplementation, 122% by NaOH - FM supplementation and 63% by HNOJ- FM supplementation compared with control. Taurine content of breast muscle of Taurine treatment was 246% higher than the control, but other treatments were not different from the control. In conclusion, supplementation of feather meal at 5% level of broiler diet can enrich taurine content of leg muscle. Chemical treatments of FM were not effective in improving taurine enrichment of broiler meat.

• Journal of Plant Biology
• /
• v.38 no.4
• /
• pp.399-407
• /
• 1995

The effects of 0.5 and 1.0 ppm of ozone on the developing chloroplast of barley (Hordeum vulgare L) seedling during greening were investigated by PSI and II activities, chlorophyll fluorescence, and the contents of chlorophyll. Etiolated barley seedling was treated 0.5 and 1.0 ppm ozone for the first 4 h during greening. In 24 h greening experiment, the contents of chlorophyll were decreased by increasing ozone concentration from 0.5 ppm to 1.0 ppm. In 24 h greening experiment, Fo, Fv, Fm and qE were greatly decreased as the concentration of ozone was increased, but those were not considerably decreased in 48 h greening experiment. In another experiment, the developing barley seedling was treated with 0.5 and 1.0 ppm ozone for the last 4 h during greening period, which was 24 h or 48 h. In both experiments the PS II activity was decreased as the concentration of ozone was increased, but not in PS I activity. Fv, Fm and Fv/Fo were also decreased as the concentration of ozone was increased. qP and qR were strikingly decreased as the concentration of ozone was increased in both experiments.iments.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.616-623
• /
• 2013

One of the oldest, most common engineering problems is measuring the dimensions of different objects and the distances between locations. In AEC/FM, related uses vary from large-scale applications such as measuring distances between cities to small-scale applications such as measuring the depth of a crack or the width of a welded joint. Within the last few years, advances in applying new technologies have prompted the development of new measuring devices such as ultrasound and laser-based measurers. Because of wide varieties in type, associated costs, and levels of accuracy, the selection of an optimal measuring technology is challenging for construction engineers and facility managers. To tackle this issue, we present an overview of various measuring technologies adopted by experts in the area of AEC/FM. As the next step, to evaluate the performance of these technologies, we select one indoor and one outdoor case and measure several dimensions using six categories of technologies: tapes, total stations, laser measurers, ultrasound devices, laser scanners, and image-based technologies. Then we evaluate the results according to various metrics such as accuracy, ease of use, operation time, associated costs, compare these results, and recommend optimal technologies for specific applications. The results also revealed that in most applications, computer vision-based technologies outperform traditional devices in terms of ease of use, associated costs, and accuracy.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.3
• /
• pp.47-52
• /
• 2014

In the last decades, Facility Management (FM) has established itself as a key building service factor.FM includes supporting services and organizing functions essential for maintaining, operating and managing physical component and material. The purpose of the paper is to develop an economical analysis for building facilities management during its service life based on limited cost. This method helps to facilities managers and engineers to make better decisions for reducing of facilities assessment costs and increasing the facilities' service life. This paper presents the preliminary development of a model involves three stages process namely data collection, economic computation and economic process optimization. This process was tested for fiberglass doors example in a building interior and exterior system. If executives can manage essential points effectively and make decisions according to a key performance index, cost can be optimized and safety can be enhanced for installation building.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.53-64
• /
• 2013

Folksonomies have potential problems caused by synonyms, tagging level, neologisms and so forth when retrieving music by tags. These problems can be tackled by introducing the mood intensity (Arousal and Valence value) of music as its internal tag. That is, if moods of music pieces and their mood tags are all represented internally by numeric values, A (Arousal) value and V (Valence) value, and they are retrieved by these values, then music pieces having similar mood with the mood tag of a query can be retrieved based on the similarity of their AV values though their tags are not exactly matched with the query. As a prerequisite study, in this paper, we propose the mapping table defining the relation between AV values and folksonomy tags. For analysis of the association between AV values and tags, ANOVA tests are performed on the test data collected from the well known music retrieval site last.fm. The results show that the P values for A values and V values are 0.0, which means the null hypotheses could be rejected and the alternative hypotheses could be adopted. Consequently, it is verified that the distribution of AV values depends on folksonomy tags.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.828-833
• /
• 2002

Thirty mature pregnant ewes of the Phan Rang breed with an initial live weight of 30 to 45 kg were used to compare the effects of three different diets in late pregnancy on ewe and lamb performance. All diets contained 20% of whole sugar cane, 16% rice bran, 26% cassava root and 6% molasses urea block. The remaining 32% of dry matter consisted of Jackfruit (JF diet), 16% each of Jackfruit and Cassava foliage (JF+CS diet) or Jackfruit and Flemingia foliage (JF+FM diet). The diets were fed at 3.5% of actual BW of the individual animal. The foliages were offered at 120% of the amount decided in the diets of the requirements. The JF+CS diet resulted in significantly higher feed intake than the JF diet, and also a higher feed intake than the JF+FM diet, but this difference was not significant. The ewe weight changes during the last 8 weeks of pregnancy, or from start to 24 h after lambing, were significantly different. The highest weight gain was obtained from the ewes fed the JF+CS diet. Diets had no effect on weight changes of ewes during 3 weeks after lambing but a significant effect on the litter birth weight, with the JF+CS diet giving the highest litter birth weight. There was, however, no effect on the litter weight at 21 days or litter growth rate from birth to 21 days due to the experimental diets.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.40.1-40.1
• /
• 2010

The Main payload of the STSAT-3 (Korea Science & Technology Satellite-3), MIRIS (Multipurpose Infra-Red Imaging System) has been developed for last 3 years by KASI, and its Flight Model (FM) is now being developed as the final stage. All optical lenses and the opto-mechanical components of the FM have been completely fabricated with slight modifications that have been made to some components based on the Engineering Qualification Model (EQM) performances. The components of the telescope have been assembled and the test results show its optical performances are acceptable for required specifications in visual wavelength (@633 nm) at room temperature. The ensuing focal plane integration and focus test will be made soon using the vacuum chamber. The MIRIS mechanical structure of the EQM has been modified to develop FM according to the performance and environment test results. The filter-wheel module in the cryostat was newly designed with Finite Element Analysis (FEM) in order to compensate for the vibration stress in the launching conditions. Surface finishing of all components were also modified to implement the thermal model for the passive cooling technique. The FM electronics design has been completed for final fabrication process. Some minor modifications of the electronics boards were made based on EQM test performances. The ground calibration tests of MIRIS FM will be made with the science grade Teledyne PICNIC IR-array.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.