• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.216-218
• /
• 2006

The application of aluminium alloy is increasing for lightweight and high quality transport vehicle. In this study, therefore, it is intended to apply the high speed hybrid welding method for marine grade aluminium alloy(A5083) used for shipbuilding that consists of 3 kW CW Nd:YAG laser and MIG welding process. For this purpose, the characteristics of process parameters(laser & arc combine angle and focal position of hybrid head to specimen) are investigated for hybrid fillet joint. This study also describes determination of heat distribution using finite element model of the T-joint fillet weld using the in-house solver which has been validated for different type of welding problems.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.776-783
• /
• 2019

Laser welding is usually a more effective method than electron-beam one since a vacuum chamber is not required. It is important for joining Zr-1%Nb (E110) alloy in a manufacturing process of nuclear fuel rods. In the present work, effect of energy parameters of pulsed laser welding on properties of butt joints of sheets with a thickness of 0.5 mm is investigated. The most efficient combination has been found (8-11 J pulse energy, 10-14 ms pulse duration, 780-810 W peak pulse power, 3 Hz pulse frequency, 1.12 mm/s welding speed). The results show that ultimate strength under static loading can not be used as a quality criterion for zirconium alloys welds. Increased shielding gas flow rate does not allow to protect weld metal totally and contributes to defect formation without using special nozzles. Several types of imperfections of the welds have been found, but the major problem is branching microcracks on the surface of the welds. It is difficult to identify the cause of their appearance without additional research on improving the welding zone protection (gas composition and flow rate as well as nozzle configuration) and studying the hydrogen content in the welds.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.53-59
• /
• 1999

Recently, Tailor Welded Blank (TWB) is widely used in automotive industry since the transformation characteristic of its material can be changed. However, clearance between welding surfaces becomes the important factor which affect the quality of the laser weld, causing difficulties in preparing the sheet. The objective of this paper is to systematically evaluate the effects of previously presented fracture criterion and shearing condition on precise mechanical shearing simulation result. For this purpose, a parametric study was peformed to investigate the effect of finite element size and fracture criterion on simulation result. Also, in order to predict the optimum shearing condition, effect of shearing conditions such as clearance and punch radius on the shear plane shape was evaluated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.324-325
• /
• 2005

The primary aim of this paper is to develop an automated welding system capable of adapting to variation in the weld seam center in order to allow higher welding speeds and improved welding quality by using a laser vision sensor. The system is designed to compensate for production problems such as pipe ovality, variation in bevel geometry and track misalignment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1069-1075
• /
• 2012

레이저는 고밀도 열원으로써, 입열을 최소화하면서 고속용접이 가능한 장비이다. 특히 최근 상업화된 고출력 파이버 레이저는 특유의 발진원리 때문에 높은 빔품질과 소형화된 시스템이 가능하다. 이러한 장점들로 인해 파이버 레이저는 LNG 카고탱크에 대해 선박 내부에서 용접이 가능한 가장 적합한 열원이라고 판단된다. 따라서 본 연구에서는 선박산업에 레이저 용접기술을 적용하기 위해 파이버 레이저를 이용하여 LNG 선용 스테인리스강의 용접을 진행하였다. 연구에서 사용한 재료는 카고탱크에 사용되고 있는 오스테나이트계 스테인리스강인 두께 1.2mm의 STS304L였다. 레이저 출력 및 용접속도를 변화시켜가면서 겹치기 및 맞대기 용접을 실시한 후 용입특성을 분석하여 최적의 접합조건을 도출하였다. 그 결과 용접부에서 모재보다 우수한 기계적 성질을 얻을 수 있었다.

• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.22-28
• /
• 2006

A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly for Pressurized Water Reactors (PWRs). The weld quality of spacer grids in PWRs fuel is extremely important for the fuel assembly performance in the nuclear renter. The spacer grid welds are currently evaluated mainly by the metallographic examination although it reveals only cross-points which are welded by the laser beam. This experiment is also to compare the weldability of Zircaloy-4 spacer grids using by the GTA and LB. The effect of node geometries of spacer grids for the GTAW and LBW has been studied and optimum conditions of spacer grid welding have been found. Microstructures and micro-hardness of the GTA and LB welded zones have been also compared.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.99-106
• /
• 1996

Development of an automatic TIG welding system incorporating a vision sensor and torch control mechanism leads to an improved welding quality and greater production efficiency. The automatic welding system should be greatly restricted in its size and weight for the LNG(Liquefied Natural Gas) storage tank and also provide a unique torch rotating mechanism which keeps the torch tip in the constant position while the angle is changed continuously to maintain the welding torch substantially perpendicular to the weld line. The developed system is driven by two translation axes X, Z and one rotational axis. A moving line window method is adopted to the image recognition of the corrugated membranes with specular reflection. This method decides original laser stripe patterns in image which is affected by multi-reflection. A self-teaching algorithm, which guides the automatic welding machine with the information provided by the CCD camera without any previous learning of a reference trajectory, was developed for tracking the corrugated membrane of the LNG tank along the weld line.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1374-1380
• /
• 2002

용접을 하는데 있어서 보다 균일한 용접상태를 유지하고, 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식의 센서가 활용이 되고 있다. 본 논문에서는 비접촉식 중 비전센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 일정 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다는 것을 확인할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2001

최근, 아크용접을 하는데 있어서 보다 균일한 용접상태와 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식으로 대별된다. 본 논문에서는 비접촉식 중 영상처리센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 어떤 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다.