• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.313-323
• /
• 2016

With the development of autonomous vehicle, there has been active research on advanced driver assistance system for road marking detection using vision sensor and 3D Laser scanner. However, vision sensor has the weak points that detection is difficult in situations involving severe illumination variance, such as at night, inside a tunnel or in a shaded area; and that processing time is long because of a large amount of data from both vision sensor and 3D Laser scanner. Accordingly, this paper proposes a road marking detection and classification method using single 2D Laser scanner. This method road marking detection and classification based on accumulation distance data and intensity data acquired through 2D Laser scanner. Experiments using a real autonomous vehicle in a real environment showed that calculation time decreased in comparison with 3D Laser scanner-based method, thus demonstrating the possibility of road marking type classification using single 2D Laser scanner.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.314-319
• /
• 2002

The Automation and Control Group at the University of Brasilia is developing an automatic welding station based on an industrial robot and a controllable welding machine. Several techniques were applied in order to improve the quality of the welding joints. This paper deals with the implementation of a laser-based computer vision system to guide the robotic manipulator during the welding process. Currently the robot is taught to follow a prescribed trajectory which is recorded a repeated over and over relying on the repeatability specification from the robot manufacturer. The objective of the computer vision system is monitoring the actual trajectory followed by the welding torch and to evaluate deviations from the desired trajectory. The position errors then being transfer to a control algorithm in order to actuate the robotic manipulator and cancel the trajectory errors. The computer vision systems consists of a CCD camera attached to the welding torch, a laser emitting diode circuit, a PC computer-based frame grabber card, and a computer vision algorithm. The laser circuit establishes a sharp luminous reference line which images are captured through the video camera. The raw image data is then digitized and stored in the frame grabber card for further processing using specifically written algorithms. These image-processing algorithms give the actual welding path, the relative position between the pieces and the required corrections. Two case studies are considered: the first is the joining of two flat metal pieces; and the second is concerned with joining a cylindrical-shape piece to a flat surface. An implementation of this computer vision system using parallel computer processing is being studied.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.768-772
• /
• 2008

Various scanning systems have been studied in many industrial areas to acquire a range data or to reconstruct an explicit 3D model. Currently optical technology has been used widely by virtue of noncontactness and high-accuracy. In this paper, we describe a 3D laser scanning system developped to reconstruct the 3D surface of a large-scale object such as a curved-plate of ship-hull. Our scanning system comprises of 4ch-parallel laser vision modules using a triangulation technique. For multi laser vision, calibration method based on least square technique is applied. In global scanning, an effective method without solving difficulty of matching problem among the scanning results of each camera is presented. Also minimal image processing algorithm and robot-based calibration technique are applied. A prototype had been implemented for testing.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.634-640
• /
• 2015

This paper proposes a novel three-dimensional mapping algorithm in Omni-Directional Vision SLAM based on a fisheye image and laser scanner data. The performance of SLAM has been improved by various estimation methods, sensors with multiple functions, or sensor fusion. Conventional 3D SLAM approaches which mainly employed RGB-D cameras to obtain depth information are not suitable for mobile robot applications because RGB-D camera system with multiple cameras have a greater size and slow processing time for the calculation of the depth information for omni-directional images. In this paper, we used a fisheye camera installed facing downwards and a two-dimensional laser scanner separate from the camera at a constant distance. We calculated fusion points from the plane coordinates of obstacles obtained by the information of the two-dimensional laser scanner and the outline of obstacles obtained by the omni-directional image sensor that can acquire surround view at the same time. The effectiveness of the proposed method is confirmed through comparison between maps obtained using the proposed algorithm and real maps.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.644-647
• /
• 1996

In this study the theoretical minimum resolution analysis of an active vision system using laser range finder is performed for surrounding recognition and 3D data acquisition in unknown environment. The laser range finder consists of a slitted laser beam generator, a scanning mechanism, CCD camera, and a signal processing unit. A laser beam from laser source is slitted by a set of cylindrical lenses and the slitted laser beam is emitted up and down and rotates by the scanning mechanism. The image of laser beam reflected on the surface of an object is engraved on the CCD array. In the result, the resolution of range data in laser range finder is depend on distance between lens center of CCD camera and light emitter, view and beam angles, and parameters of CCD camera.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.949-957
• /
• 2017

본 논문에서는 2단 가변 밸브 리프트 모듈의 조립불량 검사를 수행하기 위하여, 레이저 비전 기반의 높이 측정 시스템을 개발하였다. 측정방식은 레이저 비전 센서 모듈을 이용하여 삼각 측량법의 원리에 기초하여 3차원 점군집(point cloud) 데이터를 수집하고, 이를 바탕으로 밸브 위치의 높이 차이를 계산하였다. 본 논문에서는 먼저, 측정 시스템의 구성과 제안된 높이 측정 알고리즘을 설명하였다. 그리고, 레이저 비전 기반의 3차원 측정을 위한 실험장치를 구성하였다. 마지막으로, 실험장치의 정확성과 반복성을 검증하기 위해서, 2단 가변 밸브 리프트 모듈에서의 래쉬조정기 및 밸브간의 고저 차이를 측정하는 실험들을 여러 번 수행하였다. 실험 수행결과, 제안된 레이저 비전 기반의 높이 측정 시스템은 2단 가변밸브 리프트 모듈 조립 검사에 대한 높은 정확성, 반복성 및 안정성을 확보하고 있음을 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.56.3-56
• /
• 2002

For the weld quality improvement and the convenient operation of machines, laser vision system can be used to track weld seams on pressure vessels. There are many bad conditions to the weld grooves such as cutting error, gap variation of weld joint, and offset error of center line caused by misalignment. We developed a laser vision seam tracking system which consists of a laser vision sensor, a two axis positioning mechanism and a user interface program running on the Windows system. It was found that our system worked well for U, V and X shaped grooves. We used an industrial PC as the system controller to secure immunity to electrical noise and dust. We introduce here a simple and...

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1260-1272
• /
• 2008

This paper proposes object detection algorithm using laser scanner and vision system for the path planning of autonomous mobile agents. As the scanner-based method can observe the obstacles in only two dimensions, it is hard to detect the shape and the number of obstacles. On the other hand, vision-based method is sensitive to the environment and has its difficulty in the accurate distance measurement. Thus, we combine these two methods based on K-means algorithm such that the obstacle avoidance and optimal path planning of autonomous mobile agents can be achieved.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.53-60
• /
• 1999

Conventionally, CCD camera and vision sensor using the projected pattern of light is generally used to inspect the weld bead defects. But with this method, a lot of time is needed for image preprocessing, stripe extraction and thinning, etc. In this study, laser vision sensor using the scanning beam of light is used to shorten the time required for image preprocessing. The software for deciding whether the weld bead is in proper shape or not in real time is developed. The criteria are based upon the classification of imperfections in metallic fusion welds(ISO 6520) and limits for imperfections(ISO 5817).

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 춘계학술발표대회 논문개요집
• /
• pp.8-11
• /
• 2002