대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제41권10호
  • /
  • Pages.949-957
  • /
  • 2017
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

레이저 비전을 이용한 2단 가변밸브 리프트 모듈의 3D 조립검사에 대한 연구

Study on the 3D Assembly Inspection of Two-Step Variable Valve Lift Modules Using Laser-Vision Technology

  • 투고 : 2016.05.18
  • 심사 : 2017.07.06
  • 발행 : 2017.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 2단 가변 밸브 리프트 모듈의 조립불량 검사를 수행하기 위하여, 레이저 비전 기반의 높이 측정 시스템을 개발하였다. 측정방식은 레이저 비전 센서 모듈을 이용하여 삼각 측량법의 원리에 기초하여 3차원 점군집(point cloud) 데이터를 수집하고, 이를 바탕으로 밸브 위치의 높이 차이를 계산하였다. 본 논문에서는 먼저, 측정 시스템의 구성과 제안된 높이 측정 알고리즘을 설명하였다. 그리고, 레이저 비전 기반의 3차원 측정을 위한 실험장치를 구성하였다. 마지막으로, 실험장치의 정확성과 반복성을 검증하기 위해서, 2단 가변 밸브 리프트 모듈에서의 래쉬조정기 및 밸브간의 고저 차이를 측정하는 실험들을 여러 번 수행하였다. 실험 수행결과, 제안된 레이저 비전 기반의 높이 측정 시스템은 2단 가변밸브 리프트 모듈 조립 검사에 대한 높은 정확성, 반복성 및 안정성을 확보하고 있음을 확인할 수 있었다.

A laser-vision-based height measurement system is developed and implemented for the inspection of two-step variable valve lift module assemblies. The proposed laser-vision sensor module is designed based on the principle of laser triangulation. This paper summarizes the work on 3D point cloud data collection and height difference measurements. The configuration of the measurement system and the proposed height measurement algorithm are described and analyzed in detail. Additional measurement experiments on the height differences of valves and lash adjusters of a two-step variable valve lift module were implemented repeatedly to evaluate the accuracy and repeatability of the proposed measurement system. Experimental results show that the proposed laser-vision-based height measurement system achieves high accuracy, repeatability, and stabilization for the inspection of two-step variable valve lift module assemblies.

키워드

참고문헌

  1. Hara, S., Suga, S., Watanabe, S. and Nakamura, M., 2009, "Variable Valve Actuation Systems for Environmentally Friendly Engines," Hitachi Review, Vol. 58, pp. 319-324.
  2. Sellnau, M., Kunz, T., Sinnamon, J. and Burkhard, J., 2006, "2-step Variable Valve Actuation: System Optimization and Integration on an SI Engine," SAE Technical Paper 2006-01-0040, doi:10.4271/2006-01-0040.
  3. Sudatham, W., Matsumoto, H., Takahashi, S. and Takamasu, K., 2016, "Non-contact Measurement Technique for Dimensional Metrology Using Optical Comb," Measurement, Vol. 78, pp. 381-387. https://doi.org/10.1016/j.measurement.2015.07.053
  4. Weckenmann, A., Jiang, X., Sommer, K.D., Neuschaefer-Rube, U., Seewig, J., Shaw, L. and Eslter, T., 2009, "Multisensor Data Fusion in Dimensional Metrology," CIRP Annals - Manufacturing Technology, Vol. 58, pp. 701-721. https://doi.org/10.1016/j.cirp.2009.09.008
  5. Schmitt, R., Witte, A., Janben, M. and Bertelsmeier, F., 2014, "Metrology Assisted Assembly of Airplane Structure Elements," Procedia CIRP, Vol. 23, pp. 116-121. https://doi.org/10.1016/j.procir.2014.10.073
  6. Son, S., Park, H. and Lee, H., 2002, "Automated Laser Scanning System for Reverse Engineering and Inspection," Machine Tools & Manufacture, Vol. 42, pp. 889-897. https://doi.org/10.1016/S0890-6955(02)00030-5
  7. Lee, J.H., Kim, J.K., Park, S.K. and Kwon, K.Y., 2009, "Development of Mono Laser Vision System for 3D Measurement of Panels with Various Bevel Edges," Int. Sym. on Optomechatronic Technologies.
  8. Zhou, F., Peng, B., Cui, Y., Wang, Y. and Tan, H., 2013, "A Novel Laser Vision Sensor for Omnidirectional 3D Measurement," Optics & Laser Technology, Vol. 45, pp. 1-12. https://doi.org/10.1016/j.optlastec.2012.08.005
  9. Nguyen, H.C. and Lee, B.R., 2014, "Laser-visionbased Quality Inspection System for Small-bead Laser Welding," Precision Engineering Manufacturing, Vol. 15, pp. 415-423. https://doi.org/10.1007/s12541-014-0352-7
  10. Nguyen, H. C. and Lee, B. R., 2014, 2015, "Development of a Laser-vision-based Scanning System for 3D Model Reconstruction," Int. Conf. on Mechatronics Technology.
  11. Ding, Y., Zhang, X. and Kovacevic, R., 2016, "A Laser-based Machine Vision Measurement System for Laser Forming," Measurement, Vol. 82, pp. 345-354. https://doi.org/10.1016/j.measurement.2015.10.036
  12. Abu-Nabah, A., ElSoussi, O. and AlAlami, K., 2016, "Simple Laser Vision Sensor Calibration for Surface Profiling Applications," Optics and Lasers in Engineering, Vol. 84, pp. 51-61. https://doi.org/10.1016/j.optlaseng.2016.03.024
  13. Usametiaga, R., Molleda, J. and Gracia, D.F., 2012, "Fast and Robust Laser Stripe Extraction for 3D Reconstruction in Industrial Environments," Mach. Vision Appl., Vol. 23, pp. 179-196. https://doi.org/10.1007/s00138-010-0288-6
  14. Jun, J., Dehua, L. and Heping, L., 2006, "New Method for Obtaining the Center of Structured Light Stripe," Comput. Eng. Appl., Vol. 42, pp. 42-44.
  15. Fores, J., Salvi, J., Cabruja, E. and Pous, C., 2004, "Laser Stripe Peak Detector for 3D Scanner - a FIR Filter Approach," Proc. 17th Int. Conf. on Pattern Recognition, Vol. 3, pp. 646-649.
  16. Shimizu, M. and Okutomi, M., 2005, "Sub-Pixel Estimation Error Cancellation on Area-Based Matching, " International Journal of Computer Vision, Vol. 63, No. 3, pp. 207-224. https://doi.org/10.1007/s11263-005-6878-5
  17. Xu, D., Wang, L.K., Tu, Z.G. and Tan, M., 2005, "Hybrid Visual Servoing Control for Robotic Arc Welding Based on Structured Light Vision," Acta Autom. Sin., Vol. 31, pp. 596-605.
  18. Niola, V., Rossi, C., Savino, S. and Strano, S., 2011, "A Method for the Calibration of a 3-D Laser Scanner," Robo. and Comput. Integra. Manuf., Vol.27, pp. 479-484. https://doi.org/10.1016/j.rcim.2010.06.030
  19. Li, J., Chen, M., Jin, X., Chen, Y., Dai, Z., Ou, Z. and Tang, Q., 2011, "Calibration of a Multiple Axes 3-D Laser Scanning System Consisting of Robot," Portable Laser Scanner And Turntable, Optik, Vol. 122, pp. 324-329.
  20. Lee, B. R. and Nguyen, H. C., 2015, "Development of Laser-vision System for Three-dimensional Circle Detection and Radius Measurement," Optik, Vol. 126, pp. 5412-5419. https://doi.org/10.1016/j.ijleo.2015.09.131
  21. Fitzgibbon, A.W. and Fisher, R.B., 1995, "A Buyer's Guide to Conic Fitting," Proc. 6th British Conf. on Machine Vision, Vol. 2, pp. 513-522.