• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.307-310
• /
• 2000

The measuring method of large object using the pattern matching is discussed in the paper. It is hard and expensive to get the complete 3D data when the object is large or exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method. The point pattern matching method and transform matrix algorithm are used for aligning. The laser slit beam and CCD camera is applied for experimental measurement. Visual C++ on Window98 is implemented in processing the algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.420-425
• /
• 2003

Generally, reverse engineering means getting CAD data from unidentified shape using vision or 3D laser scanner system. In this paper, we studied unidentified model by machine vision based reverse engineering system to get information about in-processing model. Recently, vision technology is widely used in current factories, because it could inspect the in-process object easily, quickly, accurately. The following tasks were mainly investigated and implemented. We obtained more precise data by corning camera's distortion, compensating slit-beam error and revising acquired image. Much more, we made similar curves or surface with B-spline approximation for precision. Until now, there have been many case study of shape recognition. But it was uncompatible to apply to the field, because it had taken too many processing time and has frequent recognition failure. This paper propose recognition algorithm that prevent such errors and give applications to the field.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.167-174
• /
• 1998

This paper presents an unoccluded cylindrical object pose measurement using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. The elliptical equation parameters of a projected curve edge on a slice are calculated using LSM. The coefficients of standard elliptical equation are compared with these parameters to estimate the object pose. The hamming distances between the estimated coordinates and the calculated ones are extracted as measures to evaluate a local constraint and a smoothing surface curvature. The edges between slices are linked using error function based on the edge types and the hamming distances. The linked edges on slices are compared with the model object's length to recognize the unoccluded object. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as punch press operation or part assembly.

• 한국광학회지
• /
• 제3권1호
• /
• pp.16-19
• /
• 1992

회절격자와 굴절률을 알고있는 액체내에 있는 렌즈사이의 퓨리에 변환관계를 이용하여 렌즈 굴절률에 대한 수식을 유도하였다. 층밀리기 간섭기술을 이용하여 정확한 렌즈의 후면촛평면의 위치를 결정하였으며 슬릿을 스텝핑 모터로 구동하는 이동장치에 부착시켜 회절격자의 퓨리에 변환 스펙트럼 간격을 축정하였다. 세가지 액체를 사용하여 얇은 렌즈의 굴절률을 측정하였으며 높은 측정정확도를 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.165-173
• /
• 2005

This paper presents the results for deposition of micrometer-scale metal lines on glass for the development of TFT-LCD circuit repair-system. Although there had been a few studies in the late 1980's for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and W(CO)s was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 m depending on laser power and scan speed while the width was controlled between 50um using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below $1{\Omega}{\cdotu}um$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 한국광학회지
• /
• 제10권5호
• /
• pp.430-438
• /
• 1999

근적외선 파장영역에서 시분해 분광용 레이저 광원개발을 위해 발진파장이 반사경의 파장 선폭에 의해 제한된 수십 펨토초 펄스폭의 고출력 티타늄 사파이어 레이저를 개발하였다. 한쪽 프리즘 끝에 미세 stepping-motor로 제어되는 kniff-edge slits를 사용하여 발진파장을 선택하였으며, 파장가변영역은 770nm~870nm이었고, 이 파장영역에서 얻은 펄스폭은 40 fs 미만이었다. 가장 짧은 펄스폭은 약 17 fs 이었으며 이때의 파장중심은 820nm이고 선폭은 72nm이었다. 약 5W 출력의 아르곤 레이저 여기광을 사용하여 위의 파장영역에서 얻은 평균출력은 440 mW~580 mW 이었다. 연속발진 경우와 Kerr-lens mode locking 경우의 이득매질에서의 빔의 크기를 계산하여 이득변조값 ${\lambda}=2.5{\times}10_{-8}$ W을 수치적으로 얻었고, 이로부터 Ginzberg Landau 방정식을 사용하여 40 fs 미만의 펄스폭이 발생됨을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1055-1061
• /
• 2004

In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.139-146
• /
• 2004

본 논문에서는 솔더페이스트의 이차원 및 삼차원 자동검사를 함께 할 수 있는 복합 검사 광학계와 그 구동유닛을 단일 프로브 시스템으로 구현하고, 그를 위한 효과적인 비젼검사 알고리즘을 제안하였다. 솔더페이스트의 이차원 검사에는 One-pass Run Length 레이블링 알고리즘을 제안하여 입력 영상으로부터 솔더 페이스트 형상을 효과적으로 추출하도록 하였고, 고속 검사를 위한 프로브의 최적 이동 경로도 구하였으며, 삼차원 검사에는 기존의 레이져 슬릿빔(slit-beam) 방식 대신 격자 투영식 모아레 간섭계에 기반한 위상이동 알고리즘을 도입하여 고정밀 검사가 가능토록 하였다. 전체 소프트웨어 구현에는 MMX 병렬처리기법도 적용함으로써 더욱 고속화 하였다. 10㎜×10㎜의 단위 측정영역(field of view: FOV)에 대하여 x, y 축으로 10㎛ Z축으로 l ㎛의 분해능을 가지는 이차원 및 삼차원 복합 광학 검사 시스템을 제작하여 실험한 결과, 한 FOV에 대한 솔더페이스트의 이차원 및 삼차원 검사를 영상포착 후 각각 평균 11msec와 15msec의 짧은 시간에 처리할 수 있었고, ±1㎛의 두께 측정 정밀도를 얻을 수 있었다.