• 한국레이저가공학회지
• /
• 제13권2호
• /
• pp.17-23
• /
• 2010

It is very important to track a complicate weld seam for the welding automation. Very recently, laser vision sensor becomes a useful sensing tool to find the seams. Until now, however studies of welding automation using a laser vision sensor, focused on either image processing or feature recognition from CCD camera. Even though it is possible to use a simple algorithm for tracking a simple seam, it is extremely difficult to develop a seam-tracking algorithm when the seam is more complex. To overcome these difficulties, this study introduces a simulation system to develop the seam tracking algorithm. This method was verified experimentally to reduce the time and effort to develop the seam tracking algorithm, and to implement the sensing device.

• 한국측량학회지
• /
• 제29권4호
• /
• pp.429-438
• /
• 2011

LiDAR technology is a combination of laser ranging, satellite positioning technology and digital image technology for study and determination with high accuracy of the true earth surface features in 3 D. Laser scanning data is typically a points cloud on the ground, including coordinates, altitude and intensity of laser from the object on the ground to the sensor (Wehr & Lohr, 1999). Data from laser scanning can produce products such as digital elevation model (DEM), digital surface model (DSM) and the intensity data. In Vietnam, the LiDAR technology has been applied since 2005. However, the application of LiDAR in Vietnam is mostly for topological mapping and DEM establishment using point cloud 3D coordinate. In this study, another application of LiDAR data are present. The study use the intensity image combine with some other data sets (elevation data, Panchromatic image, RGB image) in Bacgiang City to perform land cover classification using neural network method. The results show that it is possible to obtain land cover classes from LiDAR data. However, the highest accurate classification can be obtained using LiDAR data with other data set and the neural network classification is more appropriate approach to conventional method such as maximum likelyhood classification.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.68-76
• /
• 1998

A CCD camera with a laser stripe was applied to realized the automatic weld seam tracking. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path. The adaptive Hough transformation was used to extract laser stripes an to obtain specific weld points. It takes relatively long time to process image on-line control using the basic control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The dead zone, where the sensing of weld line is impossible, was eliminated by rotating the camera with its rotating axis centered at the weld torch. When weld lines were detected, the camera angle was controlled in order to get the minimum image data for sensing of weld lines. Consequently, the image processing time was reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1105-1109
• /
• 1995

A CCD-camera, which is structured with vision system, was used to realize automatic seam-tracking system and 3-D information which is needed to generate torch path, was obtained by using laser-slip beam. To extract laser strip and obtain welding-specific point, Adaptive Hough-transformation was used. Although the basic Hough transformation takes too much time to process image on line, it has a tendency to be robust to the noises as like spatter. For that reson, it was complemented with Adaptive Hough transformation to have an on-line processing ability for scanning a welding-specific point. the dead zone,where the sensing of weld line is impossible, is eliminated by rotating the camera with its rotating axis centered at welding torch. The camera angle is controlled so as to get the minimum image data for the sensing of weld line, hence the image processing time is reduced. The fuzzy controller is adapted to control the camera angle.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.324-329
• /
• 2002

Generally, the laser vision sensor makes it possible design a highly reliable and precise range sensor at a low cost. When the laser vision sensor is applied to lap joint welding, however, there are many limitations. Therefore, a specially-designed hardware system has to be used. However, if the multi-lines are used instead of a single line, multi-range data can be generated from one image. Even under a set condition of 30fps, the generated 2D range data increases depending on the number of lines used. In this study, a laser vision sensor with a multi-line pattern is

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.57-60
• /
• 2002

Generally, the laser vision sensor makes it possible design a highly reliable and precise range sensor at a low cost. When the laser vision sensor is applied to lap joint welding, however. there are many limitations. Therefore, a specially-designed hardware system has to be used. However, if the multi-lines are used instead of a single line, multi-range data .:an be generated from one image. Even under a set condition of 30fps, the generated 2D range data increases depending on the number of lines used. In this study, a laser vision sensor with a multi-line pattern is developed with conventional CCD camera to carry out high speed seam tracking in lap joint welding.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.1021-1028
• /
• 2009

In this paper, a location identification for a cleaning robot using a camera shooting forward a room ceiling which kas three point landmarks is introduced. These three points are made from a laser source which is placed on an auto charger. A fisheye lens covering almost 150 degrees is utilized and the image is transformed to a camera image grabber. The widly shot image has an inevitable distortion even if wide range is coverd. This distortion is flatten using an image warping scheme. Several vision processing techniques such as an intersection extraction erosion, and curve fitting are employed. Next, three point marks are identified and their correspondence is investigated. Through this image processing and image distortion adjustment, a robot location in a wide geometrical coverage is identified.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 한국정보전자통신기술학회논문지
• /
• 제1권3호
• /
• pp.111-117
• /
• 2008

시청각 수업이나, 세미나 등에서 프로젝터와 함께 레이저 포인터와 마우스, 키보드를 같이 사용하고 있으나 레이저 포인터와 함께 마우스나 키보드를 사용 시 불편을 초래한다. 따라서 본 논문에서는 레이저 포인터의 활용도를 높이기 위해 레이저 포인터를 이동하면 그 위치를 정확히 추적하고 그 정보를 표시함으로서 마우스 기능까지 수행할 수 있는 하드웨어를 구현하였다. 시스템은 FPGA로 카메라 인터페이스를 구현하고 ARM을 이용한 영상처리 소프트웨어와 패턴 추적을 위한 소프트웨어를 제작하였다. 레이저 포인터의 정확한 위치 파악과 처리속도를 높이기 위해 하드웨어로 잡음 처리기를 구현하여 사용하였고 소프트웨어로 스펙트럼을 분석하였다. 또한 자주 나타나는 레이저 포인터의 패턴을 저장하여 정확한 추적이 가능하도록 하였다. 구현결과 20M거리 이내에서 98%의 인식률을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제31권3호
• /
• pp.147-153
• /
• 2018

콘크리트 구조물 표면에 발생하는 균열은 사용자에게 심리적인 불안감을 제공하며, 장기간 열려있는 큰 폭의 균열은 구조물의 사용성능 및 내구성에 영향을 준다. 국내에서는 건축물을 포함한 시설물의 노후화에 따른 안전관리를 위해 균열정도를 파악하는 조사가 인력에 의한 육안조사로 수행되고 있지만 인력의 고비용성과 객관성 미흡 등의 문제점이 대두되고 있다. 이를 해결하기 위해 영상분석을 통한 균열 추출 등 다양한 연구가 수행되고 있으나 균열인식 정확도 향상에 2차원 영상 분석만으로는 한계가 있다. 따라서, 본 연구에서는 기존 2차원 영상 분석의 한계를 극복하기 위하여 3차원 특성을 정확하게 파악할 수 있는 3차원 광삼각 스캐닝기법을 활용하여 콘크리트 구조물 표면의 균열정보를 획득하는 기법을 개발하였다. 본 하드웨어의 개발과 더불어 균열 패턴분석을 위한 획득된 균열의 세분화와 균열의 특성분석 알고리즘을 개발하였으며, 이를 실제 콘크리트 빔의 균열 탐지 적용을 통해 검증하였다.