• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.562-568
• /
• 1998

Various diagnostic methods, such as electric pulp test, cold test, test cavity etc., have been used to determine the pulp vitality. At least two or more methods should be used with supplemental information to diagnose each case because using one method doesn't provide sufficient accuracy. These conventional methods have depended on nervous responses, but Laser Doppler Flowmeter determines the pulp vitality by measuring pulpal blood flow. In this case, we tested the vitality of the traumatized teeth with incomplete root apices and autotransplanted teeth with conventional methods and Laser Doppler Flowmeter. Conventional methods, such as electric pulp test and cold test can produce various responses according to the development state of the pulpal nerve and the sensory threshold of the patient. But, Laser Doppler Flowmeter has a lower false response rate than any other pulp vitality test methods and it can determine the vitality somewhat earlier than the other method.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.218-226
• /
• 1996

This study was performed to evaluate the possibility of pulpal damage by measuring temperature change occured in dentin according to the thickness of dentin, the time of irradiation and the output of laser energy when the dentin surfaces were irradiated with Nd-YAG laser under water coolant and no water coolant. Sound upper and lower molar teeth were sectioned with 1mm, 1.5mm and 2mm thickness of dentin discs and divided into 4 groups by dentin thiness. 0.5 watt, 1 watt, 1.5 watt and 2 watt-energied beam of pulsed 10 p.p.s of Nd : YAG laser was applied respectively to dentin surfaces for 8 secs and 16 secs when water coolant is used or not.Ant then the temperature changes occurd in dentin were measured at opposite surfaces of laser-irradiated dentin surfaces with digital thermometer. The results were as follow. 1. When the amount of irradiated energy was same, the temperatue changes of dentin were higher as the thickness of dentin discs was thinner(p<0.01). 2. When the amount of irradiated energy and the thickness of dentins were same, The temperature changes of dentin were lower under water coolant than under no water coolant in all groups(p<0.01). 3. With the increase of time of irradiation, the temperature changes of Dentin became higher in all groups and were steeply increased at initial period of irradiation of laser. 4. Under the same thickness of dentin, the temperature changes of dentin became higher as irradiated energy was increased. These results suggest that when the beam of Nd : YAG Laser is irradiated to dential hard tissue, amount of irradiating energy, thickness of dentin, using water coolant must be considered in order to minimize thermal damage of the pulp.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.540-545
• /
• 2008

Since mid 20th century, dental treatments with laser have been introduced and improved a lot. Because early $CO_2$, Nd:YAG, diode, argon, and holmium lasers are used for dealing soft tissue, so it applied just limited field. But, in 1997 the lasers of erbium family that able to dealing soft and hard tissue also were introduced, laser application fields are enlarged. In today, the application fields reach on implantation treatment, so clinicians can use the laser to make holes for implantation, and flap elevation, even though treating peri-implantitis. So our class want to discover the optimal setting of Er:YAG laser when treating peri-implantitis. We observed the surface that initially treated by RBM and TPS passion and laser with varied options of exposure time and power with SEM image. For this we conclude the optimal setting range that does not alter the implant surface structure and report it.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.251-256
• /
• 2020

In recent years, digital technology has been developed in dentistry, which denture frameworks can be manufactured using DMLS (Direct Metal Laser Sintering) technique. A traditional impression method can be replaced by oral scanning and wax pattern production process can be achieved by the use of CAD/CAM techniques. The designed STL files can be sent to DMLS devices to fabricate final components of removable partial dentures (RPD). The advantages of digital dentistry are concision and precision. In this case study, a fracture of occlusal rests providing support and indirect retention was repaired by DMLS and laser welding techniques. It shows satisfactory results in adaptation accuracy and functional properties of the repaired denture.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.161-168
• /
• 2000

The purpose of this study was to develop a practical caries activity test using laser fluorescence. The subjects of study were 30 children of $7\sim10$ years old. Fluorescence from initial carious lesion of teeth illuminated by an argon laser(488nm) was observed through barrier alter. For evaluation of accuracy and propriety of this method fer caries activity test, teeth with initial caries lesion on buccal or labial surface of children was examined with visual inspection and laser fluorescence. Visual examination for the dDfFtT and the $Cariescreen^{(R)}$ test were also done. The results from the present study can be summarized as follows: 1. Laser fluorescence test could differentiate initial caries lesions more easily than visiual inspection. 3. There was highest correlation(= 0.73) between laser fluorescent test and $Cariescreen^{(R)}$ test and. And also apparent correlation(= 0.66) exists between laser fluorescent test and caries experience measured by dDfFtT.

• International Journal of Oral Biology
• /
• v.32 no.3
• /
• pp.109-112
• /
• 2007

Somatic cells nuclear transfer (SCNT) is a useful tool in studies of developmental biology and animal cloning. However, SCNT experiments only are allowed to skilled technical experts. In this experiment, laser-assisted zona pellucida piercing tool (LASER) was applied in murine SCNT. LASER minimized the use of piezo-driven micromanipulator (PIEZO), reducing chances of problems caused by PIEZO pulses. LASER reduced time that took to pierce zona pellucida in removal of nucleus from oocyte and somatic cell injection, which might have taken longer time with PIEZO. Time and difficulties that took researcher of equivalent skilled for their experiments were decreased with LASER, and this might affect the improvement of embryonic development. (LASER, 6.2% versus PIEZO, 2.9%; P<0.05). Thus, these data support that the use of LASER can be used for zona pellucida piercing in murine SCNT program as an alternative to PIEZO.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.660-666
• /
• 2003

The purpose of this study was to investigate the inhibitory effect of Er:YAG laser against the intraoral acid producing bacterium of S. mutans. Bacterial pellet containing S. mutans KCTC 3065 was irradiated by Er:YAG laser having a $650\;{\mu}m$ diameter beam by non-contact mode. Irradiated parameters were 50mJ, 10Hz and exposure time were 1s, 3s, 5s, 7s, 9s respectively. We obtained the following results of relative growth rate and acid-producing ability of S. mutans by culturing for 48hrs. 1. The growth rate of S. mutans was decreased in the group of laser irradiation compared to the control group(P<0.01). 2. The growth rate at laser irradiation group of 7s, 9s irradiation time was decreased significantly compared to the laser irradiation group of 1s, 3s, 5s irradiation time, until 12 hours(P<0.05). After 24 hours, all groups of laser irradiation were not found to be statistically different in each other. 3. The acid-producing ability of S. mutans was inhibited for a certain duration by irradiation of laser. In summary, the growth rate and acid producing ability of S. mutans decreased according to laser irradiation. This effect was directly related to the amount of irradiation time. These results suggested that Er:YAG laser had an growth inhibition effect on S. mutans.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.323-330
• /
• 2004

The purpose of this study was to evaluate the diagnostic validity of early proximal caries lesions using laser fluorescence and whether the detection could be enhanced using a fluorescent dye. Direct visual examination and bitewing radiograph were used for comparison. The subjects of this study were 30 children of $3{\sim}9$ years old. Laser fluorescence and dye-enhanced laser fluorescence(mixed wavelength of 488 and 514 nm) were used and viewed through glasses(excluding wavelength<520 nm). For dye-enhanced laser fluorescence a 0.075% sodium fluorescein dye was applied before examination. Proximal caries lesion of each subject was assessed using visual examination, bitewing radiograph, laser fluorescence, and dye-enhanced laser fluorescence. The results in the three detection methods were compared to the assessment of bitewing radiograph. The results from the present study can be summarized as follows: 1. There was highly correlation(r=0.725-0.911) between the bitewing radiograph and all three detection methods(p<0.05) 2. The reproducibility(kappa value) of the visual examination, laser fluorescence and dye-enhanced laser fluorescence comparing with bitewing radiograph of proximal caries was 0.451, 0.683, 0.772, respectively. There was highest correlation between dye-enhanced laser fluorescence and bitewing radiograph for detection of proximal caries. The results from this study indicated that the dye-enhanced laser fluorescence considered to be accurate and reliable method in detecting proximal caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.439-447
• /
• 2003

This was performed to evaluate the inhibitory effect of laser on the growth of S. mutans. The bacterial pallets containing S. mutans KCTC 3065 were irradiated with Er:YAG laser and Nd :YAG laser by non-contact method at an intensity of 50mJ for 5 sec with the pulse repetition rates of 10Hz and 30Hz, respectively. The following results were obtained on colony count, acid producing ability, and the amount of insoluble extracellular polysaccharide synthesis. 1. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the proliferation of S. mutans the most, and the irradiation of Er:YAG also inhibited the proliferation. However, the irradiation of Nd:YAG laser alone could not inhibited the proliferation of S. mutans. The pulse repetition rate did not affect significantly on the proliferation of bacteria in overall. 2. The irradiation of Nd:YAG laser after the photosensitization with Chinese ink inhibited the acid production of S. mutans the most for a certain period of time. Er:YAG laser also inhibited acid production. When Nd:YAG laser was used alone, the acid production of S. mutans was not been inhibited. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the acid production ability of bacteria the most as the pulse repetition rate increased. 3. Laser irradiation did not inhibited the synthesis of insoluble extracellular polysaccharide of S. mutans. From these results, we conclude that the irradiation of Er:YAG laser and Nd:YAG laser after photosensitization with Chinese ink would inhibit the proliferation and acid production by S. mutans, which may prevent dental caries. However, this effect does not last long time so that the laser irradiation should be repeated frequently in order to obtain clinical effect; thus, this laser irradiation would not have a clinical usefulness in preventing dental caries when used solely.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.153-160
• /
• 2003

The purpose of study was to evaluate the effects of the $CO_2$ laser irradiation on demineralization inhibition and rehardening of human primary tooth enamel by laser fluoresecence measurement. Enamel specimens were made from the human primary teeth. The center spots of the specimens about 2 mm diameter were irradiated by $CO_2$ laser at the conditions of focused continuous or defocused pulsed, 3 or 6 W, for 4 seconds, before or after the demineralization by Coca-Cola for 24 hours at $37^{\circ}C$. The Diagnodent was used to measure the degree of demineralization and rehardening. There was no significant difference between focused continuous and defocused pulsed irradiation. 6W irradiation inhibited the demineralization but 3W did not. 6W irradiation rehardened the demineralized enamel but 3W did partially. The color of enamel was changed to brown to black after 6W irradiation but 3W caused no color change. $CO_2$ laser irradiation showed the effects on demineralization inhibition and rehardening of human priamary tooth enamel, and the laser fluoresecence measurement technique seemed to be a valid evaluation method.