• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.69-75
• /
• 2002

This study investigated the effect of the system parameters on penetration depth measurement using infrared temperature sensing system. The distance from focusing lens to detector was varied to diminish the error in measuring weld bead width. The effect of bead surface shape on measured surface temperature profile was evaluated using specimen heated by electric resistance. The measuring distance from laser beam was changed to optimize the measuring point. The results indicated that the monitoring device of surface temperature using infrared detector array was applicable to real time penetration depth control.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.893-898
• /
• 2014

펄스 레이저를 적용한 실버나노와이어의 접합 영향이 연구되었다. 조사된 레이저 펄스 에너지는 실버나노와이어 네트워크에서 실버나노와이어간에 접합을 유도하였으며 이로 인해 투명 기저위의 실버나노와이어 네트워크 박막에 전기 저항값을 조절할 수 있었다. 특히 이러한 나노네트워크에서의 접합은 개별 나노와이어의 접촉점의 형태로 발생되었고 접합의 효과는 전체 실버나노와이어 네트워크의 전기저항 변화 측정으로 평가하였다. 또한 레이저 빔 펄스폭 및 레이저 평균 출력이 나노와이어 접합 비율 평가에 적용되어 연구되었다. 실버나노와이어 네트워크의 광학 특성도 관찰되었으며 이에 레이저 공정 요소 대비 효과도 연구되었다. 최적화된 레이저빔 적용 재료처리는 특화된 국부 재료 특성 개선에 장점을 보였다. 펄스 레이저를 이용한 실버나노와이어의 재료처리의 적용과 그 효과에 대해서도 논의한다.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.56-61
• /
• 2010

Recently, UV pulse laser is widely used in micro machining of the research, development and industry field of IT, NT and BT products because the laser short wavelength provides not only micro drilling, micro cutting and micro grooving which has a very fine line width, but also high absorption coefficient which allows a lot of type of materials to be machined more easily. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, the commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computitional simulation of the UV laser micro machining behavior for thin copper material in this paper. A finite element model considering high strain rate effect is especially suggested to investigate the micro phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. From these computational results, some of dynamic deformation behaviors such as dent deformation shapes, strains and stresses distributions were observed and compared with previous experimental works. These will help us to understand micro interaction between UV laser beam and material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2107-2109
• /
• 2000

A pulsed Nd:YAG laser is used widely for materials processing and medical instrument. It's very important to control the laser energy density in those fields using a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this paper, the alternating charge and discharge system was designed to adjust a pulse repetition rate This system is controlled by microprocessor and allows to replace an expensive condenser for high frequency to cheap one for low frequency. In addition, The microcontroller monitors the flow of cooling water, short circuit. and miss firing and so on. We designed Nd:YAG laser firmware with smart microcontroller, and want to explain general matters about the firmware from now.

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.15-19
• /
• 1999

The formation of spontaneous transverse optical patterns was investigated in a single feedback mirror system using nematic liquid crystals as nonlinear optical media. By varying the size of an input beam and the feedback distance, we obtained various interesting transverse optical patterns as well as the hexagonal pattern which are predicted theoretically assuming plane wave input. We can explain theoretically these characteristics of various pattern by introducing a ratio of the beam half width and spatial wavelength of the patterns. We have observed that as this ratio increased, the number of spot constituting the patterns also increased. Finally the patte군 evolved into the sucessive hexagon in the transverse plane.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.165-173
• /
• 2005

This paper presents the results for deposition of micrometer-scale metal lines on glass for the development of TFT-LCD circuit repair-system. Although there had been a few studies in the late 1980's for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and W(CO)s was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 m depending on laser power and scan speed while the width was controlled between 50um using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below $1{\Omega}{\cdotu}um$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1877-1883
• /
• 2010

선배열 슬릿 마스크를 이용하여 발생시킨 협대역의 레이저 여기 표면파의 주파수 특성을 이론적으로 분석하여 음향비선형성 분석에 영향을 미칠 수 있는 초기 고조파성분의 발생 기구를 규명하였다. 그리고 알루미늄 6061-T6 합금의 음향 비선형성에 대한 슬릿 열림폭과 레이저 세기의 영향을 단일 슬릿과 선배열 슬릿을 이용하여 실험적으로 분석하였다. 고조파 성분의 진폭은 슬릿 열림폭에 의존하는데 본 연구의 경우 슬릿 배열간격을 1.67 mm로 하여 1.75 MHz의 표면파를 발생시켰으며 이 경우 슬릿 열림폭이 0.5 mm에서 1.0 mm로 증가함에 따라 2차 고조파 성분의 진폭은 약 80 % 감소하였다. 또한 레이저 세기에 따라서 기본파 성분 진폭($A_1$)을 변화시키면서 2차 고조파 진폭($A_2$)의 변화를 실험한 결과 $A_1^2$과 $A_2$간에는 우수한 선형 관계를 보였으며, 이는 전형적인 음향비선형성의 특징을 잘 나타낸다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.37-41
• /
• 1990

The quality of cutting surface such as surface roughness, heat affected zone, serf width can be improved by controlling the parameters of cuting process. These parameters includes cutting velocity, laser beam power, material depth and assistant gas. Thermodynamic analysis and systematical experiments are attempted to pedict and determine the optimal cutting condition. There exists the optimal cutting condition to ensure high quality surface. Under this operation, the minimum surface roughness of the mild steel, the stainless steel and the titanium becomes 3.8${\mu}{\textrm}{m}$ 13${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$ respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1410_1411
• /
• 2009

본 연구에서는 고전압·방전, Laser Beam, Plasma 공학분야 등에 있어서 중요한 현상 중의 하나로 대두되고 있는 Pulse Power 현상과 관련하여 고전압 단 펄스 발생장치(Pulse Width =10 ns, Pulse Height = 3kV) 시스템을 제작 하였다.