• Journal of Sericultural and Entomological Science
• /
• v.25 no.1
• /
• pp.1-20
• /
• 1983

It has been known that the insect molting hormone and its analogues exist also in plant kingdom and their concentration has been found to be about 0.1~2.0% of dry matter, which is equivalent to $10^3{\sim}10^5$ times of those in insects. This study was carried out; 1) to isolate the phytoecdysones from Korean Achyranthes radix and characterize their physico-chemical properties. 2) to investigate the biological activity of this phytoecdysone on Bombyx mori larvae. The resuls were summarized as follows; 1. The extraction method of phytoecdysones was optimized by three consecutive reflux for 1hr using 200g of dried and milled radix per 1l methanol. 2. The purification from the crude extract was made by a series of steps such as precipitation of gum-type polymer with n-Butyl acetate, adsorption on technical grade silica and chromatography with neutral alumina. The conditions of each step were optimized and the resulting crude crystal was about 500mg per kg dry radix. 3. The crude crystal from the cultivated Achyranthes(Achyranthes japonia) contained ecdysterone (20-hydroxyecdysone) and inokosterone in the proportion of one to one. In order to separate these, a series of processes such as acetylation, separation by alumina column chromatography deacetylation by alcoholysis, deionization and crystallization were introduced and optimized 125mg of ecdysterone and 18mg of inokosterone per kg dry radix were thus obtained. 4. The wild Achyranthes (Achyranthes obtusifolia) radix was found to contain the ecdysterone only. A 285mg of ecdysterone was crystallized per kg dry radix. 5. Isolated ecdysterone, inodosterone and acetylated compounds were characterized by IR., UV., NMR spectroscopy, mp, TLC and densitometry. 6. Ligation experiment was undertaken to confirm the biological activity of the purified ecdysterone; the ecdysterone could induce larval-pupal metamorphosis in the ligated abdomen of 4th instar larvae injecting 0.5~1.0${\mu}g$. 7. By ecdysterone feeding experiment using artificial diet, it was elucidated that the critical time of feeding would be the first half of each instar resulting in increased weight of silk layer. 8. The ecdysterone was fed to 5th instar silkworm at the level of 1, 2, 3, 5ppm of dry feed of artificial diet containing 5% mulberry leaves for 72hrs. At 2ppm of the concentration. body weight and silk layer weight were arrived at maximum. But at higher concentrations body weight and silk layer weight decreased than the control group. At 2ppm of the concentration, body weight was increased by 12.5%. 9. Feeding 2ppm of ecdysterone at the later half of 5th instar, the duration of larvae was shortened.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.12-18
• /
• 2015

This study was conducted to consider practical use of F2 hybrid and intervariety crossing for the improvement of silkworm eggs export and silkworm eggs manufacture. Now Kumokjam and Baegokjam come into wide use to sericulture farmers but comparison test of F1, F2 hybrid and intervariety have not been done. We weighed against the productivity among economical character. While larval period of F2 among them is most long time, pupation percentage and cocoon yield per 10,000 3rd molted larvae are lower than intervariety. With comparing F2 and intervariety, single cocoon weight of F2 is lower 9 ~ 21% than intervariety, and cocoon shell weight of F2 was lower 10 ~ 18% than intervariety. By number of cocoons per liter, F2 hybrid was lower and more irregular size than intervariety. In coparison with number of egg laid, F2 hybrid Baegokjam was 655 ea (14%) and Kumokjam 625 ea (40%) more than F1 hybrid. Also, F2 hybrid for filament grade went down than F1 hybrid. The advantage of egg production in F2 hybrid can reduce costs because there is no necessity for sex discrimination and germination control. But besides increase of number of egg laid, the productivity including economical characters was greatly lowered. Except for being a lot of laying eggs, cocoon productivity of the F2 was greatly reduced by degeneration of practical traits. Therefore the further studies are needed in order to increase utilization value of the F2 hybrid silkworm.

• Korean journal of applied entomology
• /
• v.45 no.1 s.142
• /
• pp.51-57
• /
• 2006

Culex pipiens complex larvae were found at the septic tanks in Busan and Ulsan cities located in South-eastern area of Korean peninsula. The larvae were collected in 25, 35 and 75 septic tanks out of 3,527, 622 and 1,111 septic tanks which the breeding rates were averages of 0.7%, 5.6% and 6.8% in Busan from January to May, 2003; Busan from February to March, 2004; and Ulsan from January to April, 2005, respectively. The average numbers of the mosquitoes in the tanks were 38.8, 14.9 and 13.7 larvae/dip with a 355-ml dipper. The larval densities were from 25.4 larvae/dip in January to 43.7 larvae/dip in April. 2003 which were not significantly different between them. It was the first report to find mosquito breeding at septic tink in Republic of Korea. Culex pipiens larvae were found in 6 out of 379 septic tanks at complex buildings (over $2,000m^2$ in size) in Ulsan from June to September, 2005, having an average of 1.6% for mosquito breeding rate. The mosquito larvae were collected in 8 and 530 septic tanks out of 210 and 3,729 septic tanks at large (over 300 homes) and small apartments (below 300 homes) with 3.8% and 14.2% of the average breeding rates, respectively At the septic tanks of private houses for below 50 persons, 708 out of 7,178 septic tan had Cx. pipiens larvae and pupae with 9.9% of the average breeding rate. Total average of the mosquito breeding rate was 10.9% of the investigated septic tanks of residential buildings in Ulsan. The number of mosquito larvae in the septic tanks were 15 to 75 larvae/dip. The bent net sets of septic tanks prevented from mosquito breeding to the rate of 93.1%.

• Korean journal of applied entomology
• /
• v.57 no.2
• /
• pp.57-64
• /
• 2018

The fungus gnat, Bradysia difformis, has been recognized as an important pest of greenhouse crops. There is a need for research on the control of the fungus gnat. However, it is difficult to obtain many generations of the fungus gnat for several kinds of research. Indoor propagation is a very useful method for obtaining enough individuals in cases where the need is for larvae in soil. This study was conducted to determine the optimum growing media and temperature conditions for rearing the fungus gnat in the laboratory. Under experimental temperature conditions, hatching, pupation, and eclosion rates were the highest at $20^{\circ}C$. The developmental period of the fungus gnat was shortened with higher temperatures. The greatest number of eggs was an average of 144 at $20^{\circ}C$. Using different types of larvae growth media, the highest hatching rates were 84.7 and 84.4% in water agar and potato disks, respectively. The larval period was the shortest, at 14.7 days, when grown on potato disks. The highest pupation and eclosion rates were 85.2 and 82.6% on potato disks, respectively. The highest number of eggs was an average of 125.6 on potato disks. Regarding the effects of different growth media on the eclosion rate of B. difformis, the highest eclosion rate was 88.4% on the soil mix, and was 50% on oatmeal, 25% on shredded potato. The results of four different inoculation levels of larvae on eclosion rate of B. difformis showed that the highest eclosion rate was 84.7% for 1,000 larvae. The eclosion rate was shortened with a higher number of larvae inoculated/cage. In the growth medium used, 3,000 eggs were better for the initial level of inoculation, showing a relatively high emergence rate and short developmental period. Mass rearing procedures were explained in detail.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.369-374
• /
• 2014

The rice stem borer (Chilo suppressalis Walker) was one of the most destructive pest of rice for the 1960s and 1970s in Korea. Recently, it is newly recognized as a potential risk factor to the biomass yield of bioenergy crops. The current research was firstly conducted to investigate overwintering larvae population density and pattern of rice stem borer attacking Miscanthus sacchariflorus cv. Geodae 1 which is referred to as an ideal lignocellulosic bioenergy crop in Korea. Population density of larvae per $1m^2$ in stems and rhizomes at the Miscanthus experimental plots and rates of damage (wormhole, abscission) of M. sacchariflorus cv. Goedae 1 were investigated from October 2012 to March 2013. The population of larvae per $1m^2$ in stems of Miscanthus were 23, 4, 1, and 1 in October, November, December 2012, and January 2013, respectively. Over the same period, the population of larvae in basal stem rots and rhizomes were increased, whereas decreased in stems. Interestingly, the positions of larvae for overwintering in Miscanthus were confirmed to 5~10 cm below the soil surface such as basal stem rot and rhizome, whereas the most common overwintering position known in rice is a part of stem on the ground such as rice straw and rice stubble. It would suggest that the larvae gradually moved to bottom of stems and rhizomes in soil in line with decline in temperature. Moreover, the damage rates of stems per $1m^2$ were up to more than 50% in some places. In conclusion, this might be the first report that rice stem borer could affect the productivity of biomass of Miscanthus in case of mass cultivation. Moreover, it should be necessary to make a decision in insect control management for this bioenergy feedstock and other related crops.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.67-75
• /
• 1974

The studies are to know how much cocoon crops is damaged by the stained leaf with nicotine produced from the tobacco field cultivated in mulching system in spring season and by residual nicotine in autumn season. Furthermore, the new knowledges are to make both industries keep up with their development. In spring season mulberry Held is located higher on the West-North of tobacco held below 20 degrees of slope and with 36 per cent of East-South wind and 18 per cent of South wind blowing from tobacco fold to the mulberry fold. In addition, silkworm larvae are fed with the mulberry leaf produced in the different plots placing by the different distances, l0m, 25m, 50m, 80m, and loom far from the tobacco Held as a control and it is also considered that narcotic larvae including the dead larvae are not observed. On the other hand, it is noted that better leaf quality and abundant growth of mulberry tree is produced from the mulberry fold closer to the tobacco field and with a low slope. 1) Maximum weight of larval body at the 5th stage is damaged by the stained leaf with the nicotine up to 25m far from the tobacco held. 2) The larvae fed with the mulberry leaf in mulberry Held up to 25m far from the tobacco fold produce small number of the fresh cocoons per 1 liter. 3) Low single cocoon weight and low cocoon shell weight are produced by the poison damaged larvae fed with the mulberry. leaf up to 25m far from the tobacco field and weight of cocoon shell is damaged higher than the single cocoon weight. It is resulted in low percentage of cocoon shell. 4) Cocoon yield including the double cocoon from 10,000 larvae is decreased by the larvae fed with the stained leaf in the mulberry fold up to 25m far from the tobacco fold and 19 per cent of cocoon yield is decreased with 2.4kg of cocoon yield in l0m plot and with 2.5kg of cocoon yield in 25m plot at the first season and at the 2nd season with 1.8kg o( cocoon yield in l0m plot and with 11.5kg of cocoon yield in 25m plot, 11 per cent and 9 per cent of cocoon yield including double cocoon from 10,000 larvae is decreased, as compared with the control, respectively. With these results, it is observed that nicotine damage is occurred to the silkworm larvae if the larvae are fed with the leaf in the mulberry Held within 25m-50m far from the tobacco field.