• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.10-10
• /
• 2017

Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.597-603
• /
• 2017

High-dose $^{131}I$ therapy has been generally carried out to remove remaining thyroid tissue or to cure metastasize lesion of patients who received full thyroidectomy due to differentiated thyroid cancers. In case high-dose $^{131}I$ therapy is carried out for a patient, the patient should be hospitalized being isolated for a certain period in order to restrict the amount of exposure to radiation of people at large from the patient within the limit of a level of radiation. Effective half-life is an important value to calculate how family members are exposed to radiation from a patient or to decide the period of isolation of the patient from the family members. Therefore, in this study we calculated the effective decay constant, effective half-life and period of isolation of high-dose $^{131}I$ therapy patient using NM670 SPECT/CT. As a result of carrying out this study, the effective half-life of high-dose $^{131}I$ therapy patients was derived and the time to reach the discharge level of 1.2 GBq was confirmed. When they were compared with each other in each of curative doses, the effective half-life did not have significant difference, but the time when the level of radiation remaining in the interior of the body to reach the criteria of isolation and discharge showed significant difference and it could be confirmed that the higher the curative dose the longer the period of isolation becomes. When the effective half-lives in each type of preparation were compared with each other, they did not show significant difference. However, When the times to reach the level of radiation that is the criteria of isolation and discharge in each type of preparations, they showed significant difference. The cause of the shortening of the isolation period for rhTSH patients group is decided to be low curative dose. Accordingly, if the current national health insurance (the insurance is applied to using of rhTSH in 3.7 GBq or lower) is maintained, while discerning them in each of types of preparation, we would be able to discharge patients at the time earlier than the current period of isolation (2 nights and 3 days).

• Journal of agricultural medicine and community health
• /
• v.31 no.1
• /
• pp.9-20
• /
• 2006

Objectives: This study was aimed at investigating the ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis and related factors. And we want to compare the ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis and related factors among the provinces. Methods: In order to compare, the data was referred to National health insurance center for affirming the insurance type of the dead. And age adjusted mortality rate of tuberculosis of each insurance type was analyzed by whole country and the provinces. Related factors of the provinces were gathered from public statistic books. We analysed correlation study between the ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis and related factors among the provinces. Results: Major findings were as follows 1. The ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis was 5.6. And the ratio was relatively high at 40-60 ages. 2. The ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis by the province was varying. And the factors that were financial independence, crowdedness, percent of people on medical aid, population size served by each public health center, number of hospital by a million peoples have correlated with increment of the ratio. Conclusions: As a consequence of tuberculosis control, the ratio was high. Thus this finding suggests that medical utilization and preventive behavior, environment of tuberculosis patient are under handicapped condition. Especially large cities like metropolitan area who have high financial independence, high population density, high percentage of medical aid peoples have high ratio of medical aid over health insurance of age adjusted mortality rate of tuberculosis. There is need for additional and systematic research on the attitude or tendency toward medical services(inc1uding preventive services) utilization of medical aid tuberculosis patients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.23-28
• /
• 2015

This study was performed to investigate the adequate standard pot and number of plants per tree of raising seeding pot on the foxtail millet transplanting culture in the southern province. Due to the various application of wellbeing-health food recently, for upbringing of the foxtail millet, millet and sorghum in minor cereals, R & D and policy support is being promoted actively. The foxtail millet growing season is so short from 90 to 130 days, and it is large variations for a growth temperature. The main results are as follows. When it comes to foxtail millet transplantation, seedling quality of 406 holes, 200 holes and 162 holes of raising seeding pot type were not all significant, and field rooting percentage is accounted for all 94 to 95%. Yield of a foxtail millet was exposed in 406holes 305 kg/10a>162holes 303 kg> 200holes 302 kg order, and it was no significance between test processing. When it's the raising seeding transplanting culture, in case of pot culture, 406holes pot culture were reduced the bed soil cost 63%, pot 50%, working hours 18% for 200holes pot. Transplanting seedling quality per a foxtail millet transplanting culture method, dry weight was high inclination as transplanting number of plant is less, and field rooting percentage displayed more than all 95%. Yield appeared to 2 plants seedling transplanting 315kg/10a> 3 plants seedling transplanting 304kg>1 plant seedling transplanting 256kg order. The projected cost per the pot-sort on the raising seeding transplanting culture of foxtail millet, the seedling transplanting culture of 406holes was reduced 40% percentages compared to 200holes as 76,230won/10a. As a result, 406holes pot and 2plants seedling transplanting culture, labor-saving culture was possible.

• Korean Journal of Poultry Science
• /
• v.44 no.2
• /
• pp.93-102
• /
• 2017

A duplex RT-PCR (dRT-PCR) assay was developed for the simultaneous detection and discrimination of non-virulent and virulent Newcastle disease virus (NDV) in a single PCR tube. Primers targeting the large polymerase protein (L) gene and the fusion protein (F) gene of NDV were designed to detect all NDVs (by common type PCR primers) and virulent NDVs (by pathotype PCR primers), respectively and evaluated experimentally with reference NDV strains and other poultry viral pathogens. PCR products of the expected size of 386 bp were amplified from all NDV samples whereas PCR products of the expected size of 229 bp were amplified from virulent NDV samples alone. Cross reaction was not observed with other avian viral pathogens. The detection limit of NDV by the dRT-PCR was estimated to be $10^3$ 50% egg infectious dose/0.1 mL. In the dRT-PCR using field isolates of NDV, the pathotype PCR primers detected specifically all of virulent field isolates of NDV from Malaysia, Pakistan and China whereas common type PCR primers detected 94.4% (51/54) of field isolates of NDV from China. Three Chinese NDV isolates with false negative result were non-virulent viruses. Our results indicate that the dRT-PCR might provide a rapid and simple tool for rapid simultaneous detection and discrimination of non-virulent and virulent NDVs. Therefore the developed dRT-PCR assay provides a powerful novel means for the rapid diagnosis of Newcastle disease.

• Radiation Oncology Journal
• /
• v.14 no.4
• /
• pp.307-315
• /
• 1996

Purpose : The authors conducted a retrospective analysis of patients with the carcinoma of uterine cervix treated with curative radiation therapy to evaluate the prognostic factors that would affect the results of the therapy and to get the critical ideas in determining more aggressive treatment schedule. Methods and Materials : From January 1987 to December 1988. Four hundreds and sixty patients with uterine cervical carcinomas treated with radiotherapy at KCCH were registered to this retrospective study. One hundred and three patients were treated with external radiation therapy alone, and 357 patients were treated with external radiation followed by low dose rate intracavitary radiation therapy. The follow-up rate was 88% and median follow-up duration was 48 months. Results : The overall 5 year survival rate of the patients was 67.7%, and when classified by FIGO stages, 5 year survival rates were 81.2%, 76.3%, 73.1%, 50%. 52.3%, 11.5% for stages Ib, IIa, IIb, IIIa, IVa respectively. Tumor size(p=0.0002), endocervical growth pattern(p=0.003), lymph node invasion(p=0.0001), mean hemoglobin level(p=0.0001), and pathologic cell type(p=0.0001) were significant prognostic factors and decrease in survival for young age patient group was marginally important (p=0.03). Conclusion : Significant prognostic factors in the radiation therapy of the uterine cervical carcinoma were tumor size, growth pattern of tumor, lymph node invasion, pathologic cell type, hemoglobin level of patients during treatment and lower survival rate in young age group was obvious, too. Patients with large size tumor(${\geq)$4cm), especially combined with endocervical growth patterns or advanced stages(III or more) need more aggressive treatment to improve the outcome of treatment. And positive feature of lymph node invasion affected the result of therapy, so improvement in the diagnostic and therapeutic trial is essential.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.28-34
• /
• 2017

A new naked oat cultivar, 'Jungmo2005'(Avena nuda L.), was developed for food and forage use by National Institute of Crop Science, RDA in 2010. It was derived from a cross between $F_1$['Early80'/'Gwiri33'] and $F_1$['Early80'/'Gwiri23']. 'Early80', a covered oats, has early heading and high yielding, while 'Gwiri23' of covered type and 'Gwiri33' of naked type has early heading with large-size grain. 'Jungmo2005' has the characteristics of narrow and long leaves of pale green color, middle diameter culm of yellow color and medium grain of whitish yellow color. Cultivar 'Jungmo2005' had 2 days earlier heading date (May 9) than the check cultivar 'Seonyang' (May 11) in field condition. The 'Jungmo2005' showed better winter hardiness than that of the check cultivar, and similar to the check cultivar in respect to lodging resistance. The 'Jungmo2005' had 105 cm of culm length, 21.5 cm of spike length, 658 spikes per $m^2$, 82 grains per spike, 23.3 g of 1,000-grain weight, and 622 g of test weight. The grain yield of 'Jungmo2005' was averaged $3.38MT\;ha^{-1}$, which was 6% higher than that of the check. Average forage fresh and dry matter yield of 'Jungmo2005' harvested at milk-ripe stage were 44.8 and $12.6tone\;ha^{-1}$, respectively, compared with 47.5 and $12.5tone\;ha^{-1}$ of the check. The protein content of the 'Jungmo2005' was similar to the check (7.6% and 7.5%, respectively), while ADF (28.6%) and NDF (51.5%) were lower than the check (31.4% and 57.0%, respectively). TDN content and RFV were higher than those of the check (66.3%, 120.3 and 64.1, 105.2, respectively). 'Jungmo2005' is recommended for fall sowing cropping only in the south area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and it should not be cultivated in mountain areas, where frost damages is likely to occur. The areas would do better only to sow in spring season.

• Journal of the Korean Society for Library and Information Science
• /
• v.24
• /
• pp.9-51
• /
• 1993

The purpose of this study is twofold: to investigate into general characteristics of the abstracting services in Korea and to discuss general directions of development of the abstracting services in the country. This study is designed to achieve the purpose by gathering and analysing data related to the abstracting journals published in the past ten years and by comparing the results with similar data gathered by the investigator in 1984. The major conclusions made in this study is summarised as follows. (1) Researchers and professionals working in limited numbers of subject fields are benefited by abstracting services of recent achievements in research and development in Korea. Those in most of the fields have essentially no abstracting services of such achievements. Even many researchers and professionals in the limited numbers of the fields that have some elementary abstracting services are not informed of research results in their fields because the abstracting journals are scattered in many narrow subjects and in many cases, the abstracting journals only cover publications in some specific forms and kinds. (2) Abstracting journals of general subjects, which are supposed to be of more or less help to the researchers in the subject fields that have no abstracting journals of their own, have rapidly increased in number in the past ten years. Most of such abstracting journals carry thesis and dissertation abstracts, and the rest those of research papers published in specific places, in specific forms, by specific institutes, and of reports of research projects sponsored by specific foundations. These abstracting journals are not of the kind that comprehensively provide general readers with current awareness of publications of research results in Korea. (3) Most of the abstracting journals existing in Korea are published by institutions of higher education and research institutes, and the rest by commercial publishers, industrial firms, libraries, information centers, government agencies, research foundations, learned societies, etc. Those which publish many titles are small in number and those publish one or two titles are large in number. The former is largely made up of institutions of higher education and research institutes. (4) Ten years ago, there was not a single publishing house that produced abstracting journals. Three commercial publishing houses now produce abstracting journals. As this change occurs, centers of excellence are founded and competitive elements are introduced in abstracting services. This change, in turn, is expected to improve quality of the other abstracting journals in Korea. (5) The abstracting journals published in Korea are classified by type into those of dissertations, research papers, journal articles, patent specifications in that descending order. The fact that Master's and doctoral dissertation abstracts are dominating in Korea is due to the irrational practice of publishing those abstracts at many institutions. (6) Most of the abstracting journals existing in Korea are published by national or government-supported research institutes in order to publicise their own research outputs. Their coverage of literature is normally narrow, and naturally their value to users is limited. (7) The abstracting journals published in Korea increased in number at the rate of $77.8-100\%$ every five years in the past twenty-five years. Most of the abstracting journals that ceased to be published during the period survived for two years. (8) Korean is the desirable language for the abstracting journals designed to be distributed within Korea. About half of the abstracting journals published in Korea is printed in Korean and the other half in foreign languages, and in Korean with foreign languages. All the abstracting journals in foreign languages are printed in English xcept one, which is printed in Japanese. (9) Some twenty percent of the abstracting journals in Korea is published monthly, bimonthly, and quarterly. Others are published annually, biannually, and irregularly. The latter may not function properly as a current-awareness tool due to long intervals between their issues. It is particularly undesirable that about half of the abstracting journals in Korea is published irregularly. Most of the abstracting journals published in Korea are distributed freely to individuals and institutions selected by the publishers. (10) The abstracting journals published by the use of computers increased drastically in the past ten years. The abstracting journals produced by the conventional type-setting method will probably disappear In Korea in another ten years to come. Automation of the production of abstracting journals does not simply mean technical, economic improvement of publishing processes but availability of machine-readable databases that can be used for other purposes, including the generation of other publications and the provision of machine literature searching capabilities. Necessary steps should be taken for this important development that is occurring in the abstracting services in Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.125-137
• /
• 2009

There are many reports that these implant surface treatments may affect to cellular reaction in the surface of implant. This study was done by installing the 8 type implant with the variable surface treatment, used or developed, in the mandible of the mature dog to evaluate how the method of surface treatment of the implant can affect to the bone healing by analyzing histologically and histomorphometrically and find out bone healing appearance periodically after installing implant. By using the 8 type implants which have the different surface treatment, 72 implants were installed on the mandible of 9 mature dogs, and 3 dogs were sacrificed on every 2, 4, 8 weeks. After making bone fragment by cutting and managing, we analyzed histologically, then compared with BIC(Bone to implant contact) for the histomorphometrical analysis. In the result of histological analysis, there was large amount of bone formation in good state on the adjacent area of implant in the 2 weeks testing group. At 4 weeks, although there was general bone formation, the new bone was separated with the basal bone. At 8 weeks, the new bone became matured and connected tightly to the basal bone. There was no difference in the each surface of 8 implants. In the result of histomorphometrical analysis, 2 weeks group had considerably lower value than 4 and 8 weeks group, and there was no difference between 4 and 8 weeks group. There was no difference in the each surface treatment of implants.