• 한국지능시스템학회논문지
• /
• 제20권5호
• /
• pp.624-630
• /
• 2010

심전도 신호는 일반적으로 200Hz 이상의 주파수로 표본화 되므로 효율적인 저장 및 전송을 위해서는 진단에 중요한 정보를 손실 없이 압축하는 방법이 필요하다. 본 논문에서는 곡률을 이용하여 진단에 중요한 정보인 특징점에 기반한 심전도 신호 압축 방법을 제안한다. 제안한 방식은 심전도 신호의 중요 구성요소인 P, Q, R, S, T파의 특징점이 다른 정점에 비해 곡률 값이 크므로 곡률의 국부적 극값을 이용하여 정점을 추출하였다. 또한 신호의 복원 오차를 최소화하기 위하여 순환적정점 선택 방법에 따른 정점을 특징점으로 추가한다. MIT-BIH 부정맥 데이터베이스에 있는 심전도 신호에 대한 실험을 통하여 선택한 정점들이 심전도 신호의 특징점을 모두 포함하고 있으며, 압축의 효율성도 AZTEC 방식 보다 높다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1166-1169
• /
• 1998

The Load characteristic of electric railway requires the power demand of the high capacity which amplitude is spacial-temporally fluctuated due to frequent starting and stopping with large tractive force. The conventional electric railway mainly consists of the resistance controlled and the thyristor controlled locomotives, are compensated for their bad characteristics of the power factor$(70\sim80%)$ with installation of another capacitor improving power factor at the substation. Since 1994, VVVF train car with good characteristics of power factor(100%) have been introduced and operated in Kwa-Chon Line. From the present technical tendency, it is judged that introduction of the locomotive with various controlled methods is necessary. The protective equipments installed at the substation are complicated and various aspects to detect faults and reduce their extension, so the universal countermeasures are required. Specially in the case of the fault occurrence it is difficult to calculate the fault location because of the change in the contactline constant according to modifying the characteristics of the contactline (the dualized catenary wire and extension, etc), so much time is required for the detection of fault location. In BT-fed method distance-relays and fault-locators are not installed, we have so many difficulties in the quick accident recovery.

• 지구물리와물리탐사
• /
• 제19권2호
• /
• pp.84-90
• /
• 2016

신규 센서의 성능과 노후화된 센서의 성능 평가를 하는 것은 지진 감시 및 지진연구에 있어서 매우 중요하다고 할 수 있다. 특히 센서 주파수 응답은 지진자료의 보정을 위해서 필수적으로 사용되고 있다. 이 연구에서는 주파수 스펙트럼비를 이용한 지진 기록계의 보정 방법과 시간영역 대역통과필터(bandpass filter)와 힐버트(Hilbert) 변환을 이용한 지진계 주파수 응답을 계산하는 방법을 제시하고자 하였다. 실내 진동대 실험에서 가속도 센서(CMG-5T 1g, 2g 센서)를 설치하고 제안된 방법으로 센서 주파수 응답스펙트럼을 구하였을 때 좋은 결과를 얻을 수 있었다. 또한 2011년 도호쿠 대지진에 대하여 서울대학교 관측소(SNU)의 STS-2와 ES-T에서 얻어진 자료에 대하여 제안된 방법을 적용한 결과 STS-2 광대역 센서의 저주파수 대역에 대한 주파수 응답을 얻을 수 있었다. 대역통과필터와 힐버트 변환 방법을 이용할 경우, 주파수 스펙트럼비를 이용한 방법보다 신호대 잡음이 낮은 부분에서도 명확한 주파수 응답스펙트럼을 보여주었다.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.219-232
• /
• 2020

The slip-weakening model developed by Ohnaka and Yamashita is extended over the breakdown zone by equating the scaling relationships for the breakdown zone and the whole rupture area. For the extension, the study uses the relationship between rupture velocity and radiation efficiency, which was derived in the theory of linear elastic fracture mechanics, and the definition of f_max given in the specific barrier model proposed by Papageorgiou and Aki. The results clearly show that the extended scaling relationship is governed by the ratio of rupture velocity to S wave velocity, and the velocity ratio can be determined by the ratio of characteristic frequencies of a Fourier amplitude spectrum, which are corner frequency, f_c, and source-controlled cut-off frequency, f_max, or vice versa. The derived relationship is tested by using the characteristic frequencies extracted from previous studies of more than 130 shallow crustal events (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan. Under the assumption of a dynamic similarity, the rupture velocity estimated from f_max/f_c and the modified integral timescale give quite similar scale-dependence of the rupture area to that given by Kanamori and Anderson. Also, the results for large earthquakes show good agreement to the values from a kinematic inversion in previous studies. The test results also indicate the unavailability of the spectral self-similarity proposed by Aki because of the scale-dependent rupture velocity and the rupture velocity-dependent f_max/f_c; however, the results do support the local similarity asserted by Ohnaka. It is also remarkable that the relationship between the rupture velocity and f_max/f_c is quite similar to Kolmogorov's hypothesis on a similarity in the theory of isotropic turbulence.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.249-254
• /
• 1998

자기측정법에 의한 조사손상 평가 가능성을 조사하기 위하여 SA508 CI.3강 모재금속의 중성자 조사 및 열처리 온도에 따른 자기특성(자기이력곡선, Barkhausen Noise(BN) 진폭, BN 에너지)과 경도 변화를 측정 비교하였다. 중성자 조사에 따라 자화율, BN 진폭, BN 에너지는 감소하였고 보자력과 경도는 증가하였으며, 포화자화 값은 변화하지 않았다. 열처리된 조사시편의 경우, 열처리 온도 증가에 따라 BN 에너지는 증가하였으며, 경도는 감소하였다. 결함과 전위혹은 자벽 이동과의 상호작용에 의한 경도 및 자기특성의 일관성 있는 변화는 원자로 압력용기 재료의 조사손상 평가와 관련 자기적 측정법 응용 가능성을 보여주었다.

• 한국자기학회지
• /
• 제13권4호
• /
• pp.176-181
• /
• 2003

금속마스크에 의해 패턴된 교환결합 이중박막 NiO(10∼60 nm)/NiFe(10 nm)의 모서리에서 발생한 여러 종류의 자구벽(magnetic domain wall)을 MFM(magnetic_ force microscopy)로 측정하였다. 박막의 모서리 경계선이 교환결합이방성 방향과 같은 방향일 때는 직선모양의 Neel 자구벽이 측정되었으며, 경계면이 이방성방향과 수직인 경우에는 zigzag Bloch 자구벽이 발견되었다. 이러한 자구벽은 NiO(60 nm)인 경우에는 교환결합세기(H$_{ex}$ = 75 Oe)가 박막경계면에서 발생한 반자장(demagnetization field) 세기보다 크기 때문에 발생하지 않았고, 교환결합세기가 약한 NiO(30 nm, H$_{ex}$ = 21 Oe)를 갖는 이중박막에서는 발견되었다. 이들 자구벽이 외부 자기장의 변화에 따라 움직이는 자화반전과정을 측정하기위해 $\pm$300 Oe까지 자기장을 가하면서 MFM을 측정하였다.

• 천문학회지
• /
• 제51권5호
• /
• pp.129-142
• /
• 2018

The DEEP-South (the Deep Ecliptic Patrol of the Southern Sky) photometric census of small Solar System bodies produces massive time-series data of variable, transient or moving objects as a by-product. To fully investigate unexplored variable phenomena, we present an application of multi-aperture photometry and FastBit indexing techniques for faster access to a portion of the DEEP-South year-one data. Our new pipeline is designed to perform automated point source detection, robust high-precision photometry and calibration of non-crowded fields which have overlap with previously surveyed areas. In this paper, we show some examples of catalog-based variability searches to find new variable stars and to recover targeted asteroids. We discover 21 new periodic variables with period ranging between 0.1 and 31 days, including four eclipsing binary systems (detached, over-contact, and ellipsoidal variables), one white dwarf/M dwarf pair candidate, and rotating variable stars. We also recover astrometry (< ${\pm}1-2$ arcsec level accuracy) and photometry of two targeted near-earth asteroids, 2006 DZ169 and 1996 SK, along with the small- (~0.12 mag) and relatively large-amplitude (~0.5 mag) variations of their dominant rotational signals in R-band.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.42-53
• /
• 2014

Phase resonance in Francis type hydraulic turbine is studied. The phase resonance is a phenomenon that the pressure fluctuation in the penstock of hydraulic turbine installation can become very large when the pressure waves from each guide vane caused by the interaction with the runner vane reach the penstock with the same phase. Experimental and numerical studies have been carried out using a centrifugal fan. In the present study, comparisons between the pump mode and the turbine mode operations are made. The experimental and numerical results show that the rotational direction of the rotor does not affect characteristics of the pressure fluctuation but the propagation direction of the rotorstator interaction mode plays an important role. Flow rate fluctuations through the stator are examined numerically. It has been found that the blade passing flow rate fluctuation component can be evaluated by the difference of the fluctuating pressure at the inlet and the outlet of the stator. The amplitude of the blade passage component of the pressure fluctuation is greater at the stator inlet than the one at the stator outlet. The rotor-stator interaction mode component is almost identical at the inlet and the outlet of the stator. It was demonstrated that the pressure fluctuation in the volute and connecting pipe normalized by the flow rate fluctuation becomes the same for pump and turbine mode operations, and depends on the rotational direction on the interaction mode.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.251-269
• /
• 2013

Measurement of deflections of certain bridges is usually hampered by corruption of the GPS signal by multipath associated with passing vehicles, resulting to unrealistically large apparent displacements. Field data from the Gorgopotamos train bridge in Greece and systematic experiments revealed that such bias is due to superimposition of two major effects, (i) changes in the geometry of satellites because of partial masking of certain satellites by the passing vehicles (this effect can be faced with solutions excluding satellites that get temporarily blocked by passing vehicles) and (ii) dynamic multipath caused from reflection of satellite signals on the passing trains, a high frequency multipath effect, different from the static multipath. Dynamic multipath seems to have rather irregular amplitude, depending on the geometry of measured satellites, but a typical pattern, mainly consisting of a baseline offset, wide base peaks correlating with the sequence of main reflective surfaces of the vehicles passing next to the antenna. In cases of limited corruption of GPS signal by dynamic multipath, corresponding to scale distortion of the short-period component of the GPS waveforms, we propose an algorithm which permits to reconstruct the waveform of bridge deflections using a weak fusion of GPS and RTS data, based on the complementary characteristics of the two instruments. By application of the proposed algorithm we managed to extract semi-static and dynamic displacements and oscillation frequencies of a historical railway bridge under train loading by using noisy GPS and RTS recordings. The combination of GPS and RTS is possible because these two sensors can be fully collocated and have complementary characteristics, with RTS and GPS focusing on the long- and short-period characteristics of the displacement, respectively.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.136-141
• /
• 2007

The Purpose Of This Paper Is To Use A Tactile Sensor To Compensate The Error Rate. Most Automated Sphygmomanometers Use The Oscillometric Method And Characteristic Ratio To Estimate Systolic And Diastolic Blood Pressure. However, Based On The Fact That Maximum Amplitude Of The Oscillometric Waveform And Characteristic Ratio Are Affected By Compliance Of The Aorta And Large Arteries, A Method To Measure The Artery Stiffness By Using A Tactile Sensor Was Chosen In Order To Integrate It With The Sphygmomanometer In The Future Instead Of Using Photoplethysmography. Since Tactile Sensors Have Very Weak Movements, Efforts Were Made To Maintain The Subject's Arm In A Fixed Position, And A 40hz Low Pass Filter Was Used To Eliminate Noise From The Power Source As Well As High Frequency Noise. An Analyzing Program Was Made To Get Time Delay Between The First And Second Peak Of The Averaged Digital Volume Pulse(${\Delta}t_{dvp}$), And The Subject's Height Was Divided By ${\Delta}t_{dvp}$ To Calculate The Stiffness Index Of The Arteries($Si_{dvp}$). Regression Equations Of Systolic And Diastolic Pressure Using $Si_{dvp}$ And Mean Arterial Pressure(Map) Were Computed From The Test Group (60 Subjects) Among A Total Of 121 Subjects(Age: $44.9{\pm}16.5$, Male: Female=40:81) And Were Tested In 61 Subjects To Compensate The Error Rate. Error Rates Considering All Subjects Were Systolic $4.62{\pm}9.39mmhg$, And Diastolic $14.40{\pm}9.62mmhg$, And Those In The Test Set Were $3.48{\pm}9.32mmhg,\;And\;14.34{\pm}9.67mmhg$ Each. Consequently, Error Rates Were Compensated Especially In Diastolic Pressure Using $Si_{dvp}$, Various Slopes From Digital Volume Pulse And Map To Systolic-$1.91{\pm}7.57mmhg$ And Diastolic $0.05{\pm}7.49mmhg$.