• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1032-1039
• /
• 2010

Based on the proven feasibility of bottom ash and tire shred-soil mixtures as lightweight fill materials, tire shred-bottom ash mixtures were suggested as a new lightweight fill material to replace the conventional construction material with bottom ash. Therefore, we carried out the laboratory test, field compaction test and performance test of large scale embankment in order to evaluate their suitability for the use of lightweight fill materials in the before studies. We could verified that the ash, tire-shred and the mixture are able to be the useful materials as light fill materials. In this study, we built real scale embankment with RBA(Reclamated Bottom Ash), TRBA(Tire shred-Reclamated Bottom Ash mixture), WS(Weathered Soil), BA(Bottom Ash screened by 5mm sieve) for monitoring the behavior such as settlement, lateral displacement and water content change. Furthermore, we are examining the ground water quality in the surrounding area of the test embankment.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.141-143
• /
• 2011

Al-SBA-1(Si/Al = 40, 80 and 120) and Al,Mg-SBA-1 (Si/(Al+Mg) = 40 and 80) molecular sieves were synthesized and characterized. Acetalization of n-heptanal with methanol was studied under autogenous pressure between 80 and $150^{\circ}C$. Since protonation of n-heptanal was fast, addition of methanol to the same to formed hemiacetal slowly whereas conversion of hemiacetal to acetal was fast. The catalysts exhibited nearly similar conversion irrespective of their difference in acidity, and all of them showed more than 80 % conversion either at 80 or $100^{\circ}C$. Hence it is evident that the difference in acidity is not so important in differentiating the activity of the catalysts. The large pore size and hydrophilic and hydrophobic properties are suggested to be the main factors that control acetalization.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.74-84
• /
• 2009

The study aims that high quality recycled sand by wet manufacturing system can be used in practical way through basic material property. The basic material property test was done by 4 categories, dry manufacturing system (1) tandem and (2) parallel, wet manufacturing system (3) large capacity and (4) small capacity. RS-IV is the final production of (1) to (4) method, it is tested via KS F 2573 (recycled fine aggregate). RS-IV is satisfied with 4 items, those are absolute dry density, 0.08mm sieve throughput, clay lump amount, and organic impurity substance content. However, absorptivity item has problem in (1) and (2) method, (3) and (4) method are confirmed with norms 5% low. Also, the production quality of wet manufacturing system is better than dry manufacturing system in absolute dry density, absorptivity, 0.08mm sieve throughput, and clay lump amount.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.237-246
• /
• 1995

In this study, the callus was induced and regenerated from the immature embryo and ultrastructural characteristics of developmental stages in Citrus junos SIEB, were investigated. The yellowish callus was induced by 5 to 6 week of culture of citrus. In proliferation callus after 6 weeks of culture, large vacuole was formed by fusion between adjacent small ones. In the non-embryogenic callus cultured for 12weeks, re-differentiated cells of callus showed the large nucleus with globular nucleus and amyloplast with large size of starches. In the embryogenic callus cltured for 14-16 weeks, the active exocytosis occurred in cells, secretory vesicles appeared on cell membrane and small particles from cytoplasm were released to intercelluar space. In the embryogenic callus cultured for 24 weeks, a sperical type of chloroplast bounded on cytoplasm by double membrane and typical grana was dispersed equally among matrix. In the normal plantlet after 26 weeks of culture, a lot of vessels and companion cells apperaed in the leaf cell of plantlet. In the normal plantlet after 30 weeks of culture, the immature leaf showed many small companion cells, sieve tubes and central vacuole. Also, the secondary vacuole protruded into the central vacuole and elongated chloroplasts near plasma membrane. In the matured plant habituated on the soil, palisada tissue composed of orderly arranged cells contained the nucleus in the center of the cell and large vacuoles on either side of the nucleus.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.2
• /
• pp.83-92
• /
• 2006

Recently, interest grew recently on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Especially, the environmental preservation concern and the augmentation of public grievance about the exploitation of sea sand as substitute to river sand are gradually impeding the supply. This situation aggravated by the recent interdiction to extract sea sand which resulted in sand crisis that even led once to the suspension of construction works. The lack of sea sand and river sand increased the exploitation of crushed sand which occupies now nearly 20% of the whole quantity of fine aggregates. And, the use of crushed sand may be expected to grow continuously in the future. This paper described that the properties of crushed sand and the concrete using the crushed sand, the technologies to improve quality of crushed sand and the concrete in order to provide information for the production of high-quality concrete using crushed sand.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.180-191
• /
• 2016

Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant's compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in "A" company. The compressed air passes through a pressure vessel with two "towers" filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air $70^{\circ}C$ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1093-1100
• /
• 2015

Since the security of RSA cryptosystem depends on the difficulty of factoring integers, it is the most important problem to factor large integers in RSA cryptosystem. The Lenstra elliptic curve factorization method(ECM) is considered a special purpose factoring algorithm as it is still the best algorithm for divisors not greatly exceeding 20 to 25 digits(64 to 83 bits or so). ECM, however, wastes most time to calculate $M{\cdot}P$ mod N and so Montgomery and Koyama both give fast methods for implementing $M{\cdot}P$ mod N. We, in this paper, further analyze Montgomery and Koyama's methods and propose an efficient algorithm which choose the optimal parameters and reduces the number of multiplications of Montgomery and Koyama's methods. Consequently, the run time of our algorithm is reduced by 20% or so than that of Montgomery and Koyama's methods.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1622-1622
• /
• 2001

The purpose of this research was to develop a the reflection technique with near infrared (NIR) radiation for estimating physico-chemical properties in compost. The composts (cattle, pig, chicken and waste composts) were air dried and then ground to pass through a 0.5 or 2mm sieve for the physico-chemical properties and spectroscopic determinations. The physico-chemical properties of compost were shown high values ; moisture(30-60%), T-N(0.8-2.9%), organic matter(29-89%), pH(5.89-9.60) K$_2$O(0.27-5.66%), P2O$\sub$5/(0.07-2.62%), CaO(0.03-4.80%), MgO(0.09-1.56%), NaCl(0.01-1.13%), EC(1.41-13.76dS/m). Generally, we should select a simple calibration and prediction method for determining physico-chemical properties in compost under similar accuracy and precision of prediction. It should be remembered that the NIRS approach will never replace the traditional methods. However, NIRS technique may be an effective method for rapid and nondestructive measurements of a large number of compost samples. Near infrared reflectance spectra of composts was obtained by Infra Alyzer 500 scanning spectrophotometer at 2-nm intervals from 1100 to 2500nm. Multiple linear regression(MLR) or partial least square regression (PLSR) was used to evaluate a NIRS method for the rapid and nondestructive determination of physico-chemical properties and humic acid contents in composts. The standard error of prediction(SEP) for finely sized sample(<0.5mm) and coarsely sized sample(<2mm) did not show much difference. The NIR instrument of filter type showed the same accuracy of the monochromator scanning type to estimate the compost properties. The results summarized that NIR spectroscopy can be used as a routine testing method to determine quantitatively the OM, moisture, T-N, color, pH, cation content in the compost samples nondestructively.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.122-126
• /
• 2018

Mesoporous molecular sieves were prepared by the reaction of $Na_2SiO_3$ and $H_2SiF_6$ using nonionic micelle templates in an aqueous solution. Well-crystalline mesoporous molecular sieves were obtained after several seconds at atmospheric conditions. Powder samples exhibited d-spacing of 3.8-5.1 nm with the sharpness of the d00l peak, showing well-crystalline mesoporous molecular sieves, pore size distributions of 2.5-3.1 nm and large specific surface areas of $290-1,018m^2/g$, depending on types of surfactants. SEM images of samples showed well-divided spherical particles with an uniform size of ${\sim}0.5{\mu}m$ and TEM images demonstrated uniform pores with a worm hole shape.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.702-706
• /
• 1996

Husked barley contained 17.2% dietary fiber and naked barley contained 14.9% dietary fiber. The barley was ground in a Udy cyclotec mill having a 0.5 mm screen and sieved with a 400-mesh screen (38 m openings). Coarse material of naked barley retained by the screen, with a weight yield of 54.1%, contained 7.0% soluble dietary fiber, 13.9% insoluble dietary filer and 20.9% total dietray fiber. As the naked barley flour level increased in bread baking, the water absorption, mixing time, and loaf weight increased, but the loaf volume decreased. Barley flour was added to wheat flour at a replacement level of 10% without a large adverse effect on bread quality, and the dietary fiber content of bread was increased from 3.0% to 5.0%. The soluble dietary fiber content was not changed, but the insoluble dietary fiber content was increased during the baking process.