• Interaction and multiscale mechanics
• /
• v.5 no.1
• /
• pp.27-40
• /
• 2012

The two-dimensional incompressible flow of a linear viscoelastic fluid we considered in this research has rapidly oscillating initial conditions which contain both the large scale and small scale information. In order to grasp this double-scale phenomenon of the complex flow, a multiscale analysis method is developed based on the mathematical homogenization theory. For the incompressible flow of a linear viscoelastic Maxwell fluid, a well-posed multiscale system, including averaged equations and cell problems, is derived by employing the appropriate multiple scale asymptotic expansions to approximate the velocity, pressure and stress fields. And then, this multiscale system is solved numerically using the pseudospectral algorithm based on a time-splitting semi-implicit influence matrix method. The comparisons between the multiscale solutions and the direct numerical simulations demonstrate that the multiscale model not only captures large scale features accurately, but also reflects kinetic interactions between the large and small scale of the incompressible flow of a linear viscoelastic fluid.

• Geomechanics and Engineering
• /
• v.37 no.4
• /
• pp.359-370
• /
• 2024

The primary goal of this study is to evaluate the migration of fine granular materials into overlying layers under cyclic loading using a modified large-scale triaxial system as a physical model test. Samples prepared for the modified large-scale triaxial system comprised a 60 mm thick gravel layer overlying a 120 mm thick subgrade layer, which could be either tailings or railway sand. A quantitative analysis of the migration of fine granular materials was based on the mass percentage and grain size of migrated materials collected in the gravel. In addition, the cyclic characteristics, i.e., accumulated axial strain and excess pore water pressure, were evaluated. As a result, the total migration rate of the railway sand sample was found to be small. However, the total migration rate of the sample containing tailings in the subgrade layer was much higher than that of the railway sand sample. In addition, the migration analysis revealed that finer tailings particles tended to be migrated into the upper gravel layer easier than coarser tailings particles under cyclic loading. This could be involved in significant increases in excess pore water pressure at the last cycles of the physical model test.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.440-445
• /
• 1993

A two dimensional large scale laser digitizer with a cordless cursor was developed. The coordinate detecting scheme of this digitizer is fundamentally based on the triangulation method, in which two laser-rays are scanned by the rotating plane mirros, reflected backward by the cursor, reflected again by the rotating mirrors, and detected by optical sensors. From angles in which the cursor reflections are detected, we can determine the position of the cursor. But this method involves several problems about optical alignment and its calibration especially when it is applied to a large scale digitizer. In this paper, especially we propose simulation for error analysis with connection to angles measured at five control points which are needed to decide an appropriate model for calculating coordinates and optimal simulation for deciding the position of five control points to give the better coordinate accuracy. In this way, we realized the on-site calibration and on-site insurance of measurement accuracy with our appropriate model for calculating coordinates. The time required for on-site calibration is within 5 minutes and the average accuracy of 4m * 3m digitizer is about .+-.0.12mm.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.724-732
• /
• 2016

In this paper, a sampled-data observer-based decentralized fuzzy control technique is proposed for a class of nonlinear large-scale systems, which can be represented to a Takagi-Sugeno fuzzy system. The premise variable is assumed to be measurable for the design of the observer-based fuzzy controller, and the closed-loop system is obtained. Based on an exact discretized model of the closed-loop system, the stability condition is derived for the closed-loop system. Also, the stability condition is converted into the linear matrix inequality (LMI) format. Finally, an example is provided to verify the effectiveness of the proposed techniques.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.41-44
• /
• 2007

A large eddy simulation method with unstructured mesh is presented. Two explicit filtering procedures are adopted for reducing the aliasing error of the nonlinear convective term and measuring the level of subgrid scale velocity fluctuation, respectively. The developed subgrid scale model is basically an eddy viscosity model which depends on both local velocity fluctuation level and local grid scale. As a validation problem, the flows around a sphere of several Reynolds numbers are simulated and some characteristic quantities are compared to experimental data and numerical results in the literature.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2010

Based on the sliding mode control theory, a decentralized controller design method is developed for a large scale system with a poly topic model. In terms of LMIs, we derive sufficient conditions for the existence of the decentralized controller guaranteeing a stable sliding motion. We also give an LMI-based control design algorithm. Finally, the proposed method is applied to decentralized stabilization of double-inverted pendulums. Simulation results show that our method gives not only the robust stability but perfect rejection of norm-bounded uncertainties.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.780-785
• /
• 2005

This paper aims to consider an overall benefit-duration optimization (OBDO) problem for the sake of maximizing owner's economic benefits, whilst considering influences of schedule compression incurred opportunity income on the profitability of a large-scale construction project. Unlike previous schedule optimization models and techniques that have focused on project duration or cost minimization, with greater weight on contractors' interests, OBDO facilitates owner's economic benefits through overall benefit-duration optimization. In this paper, the objective function of OBDO model is formulated. An example is illustrated to prove the feasibility and practicability of the overall benefit-duration optimization problem. The significance of employing OBDO model and future research work are also described.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.171-179
• /
• 2016

In order to study correlation of the propeller cavitation performance between a full-scale ship and a model ship for the MR Tanker, the full-scale ship and the model tests were conducted. The full-scale ship test is composed of cavitation observation, pressure fluctuation and noise measurements, which are conducted using 2 observation windows and 8 pressure transducers installed inside the full-scale ship above the propeller. The model test in the Large Cavitation Tunnel(LCT) was conducted at the same conditions as that of the full-scale ship and its results are compared with those of the full-scale ship. Through the model-ship correlation analysis, it is considered that the experimental technique for the MR Tanker class ship was verified in LCT.

• The Journal of Fisheries Business Administration
• /
• v.40 no.1
• /
• pp.1-26
• /
• 2009

The aquaculture management considers the maintenance of households lifehood more than profit maximization. As aquaculture industry has developed enterprise farms appeared, and the small and the large scale farms coexist. The features of coexistence could be summarized as followings. First of all, the large scale farms show the higher net profit while the small scale farms show the higher profit per 1ha and the earning rate. Secondly, in the case of over 2ha, the earning rate is stable in spite of the scale expansion. Moreover, in processing method, dried seaweed occupy the biggest proportion in the small scale farms while the raw seaweed occupy the biggest proportion in the large scale farms. Lastly, the scale of farms becomes larger, the participation rate of household labor rises. This thesis analyses the efficiency of Korean seaweed farms in the way of DEA model and suggests the improvements for the efficiency management. The mean technical, pure technical and scale efficiencies were measured to be 0.88, 0.96 and 0.91, respectively. Among the 20 farms included in the analysis, 10 were technically efficient and 12 were scale efficient. In conclusion, it is shown that the aquaculture farms has been becoming the form of coexistence. This appearance results in the effort for reducing the cost in the small scale farms and in profit maximization in the large scale farms. On the other hand, middle scale farms is inefficient compared with the small or large scale farms. Therefore, in order to achieve the efficiency, it is necessary to accomplish economy of scale by extending farm size or to cut expenses by reducing farm area. In other word, the efforts for achieving the efficiency is required in a different direction in spite of the same scale.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.162-167
• /
• 2004

The scale model grounding systems to study the behavior of grounding system in uniform soils have been designed and fabricated. Constructional details and instrumentation have been discussed. To verify the accuracy of the results obtained from the experimental tests, they have been compared with computer calculation results. Also, in order to assess the effectiveness of bonding two grounding systems, grounding grid conductors which were downsized as a scale factor of 100:1 were analyzed by using the scale model method. A profile of GPR(Grounding Potential Rise) of each case was measured. The scale model grounding system presented in this paper can be valuable tool to analyze the ground potential profile and ground resistance of practical grounding system.