• 환경영향평가
• /
• 제8권3호
• /
• pp.1-11
• /
• 1999

This study was carried out to evaluate urban environmental structure in Taegu metropolitan region(TMR) with factor analysis, fuzzy set theory, geostatistic and geographic information system(GIS). The factor analysis could choose the representative one out of multiple variables and simplify the evaluation of the urban environmental structure. The fuzzy approach is an attempt to model an aspect of human thinking previously neglected; it starts from the premise that humans don't represent classes of objects as fully disjoint but rather as sets where transitions from membership to non-membership is gradual. The Geographic Information System(GIS) could connect attributes of factor scores derived from factor analysis to digital map by a method so called 'Spatial join'. The results obtained were as follows: Urbanization appearance was concentrated in the large cities, and this appearance was partial extremely, therefore, there has been a structural gap between urban area and agricultural area which was unified into the urban area. All inclinations didn't become worse after sudden urbanization. For example, suburban agriculture was developed as a large scale in the region near the large cities. Then it encouraged farmers in changing their old cultivating methods to the latest ones. But many districts in urban fringe had symptom of urbanization, the districts which were located between large cities have been developed gradually because of urban sprawl, and played a role in connecting each city. Therefore, due to the urbanization, forestry area and agricultural land, well conserved in the agricultural town, could be easily destroyed. In a different way with the urbanization of the Seoul metropolitan region, that of TMR was centralized upon the center of each city, and it was also very partial. But, because so many regions have the potentiality of urbanization, hereafter, the urbanization process in each region is likely to be different multifariously according to the urban management methods.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.1-10
• /
• 2012

This paper proposes a modeling and controller design approach for a wind-diesel hybrid system including dump load. Wind turbine depends on nature such as wind speed. It causes power fluctuations of wind turbine. Excessive power fluctuation at stand-alone power grid is even worse than large-scale power grid. The proposed control scheme for power quality is fuzzy PI controller. This controller has advantages of PI and fuzzy controller. The proposed model is carried out by using Matlab/Simulink simulation program. In the simulation study, the proposed controller is compared with a conventional PI controller. Simulation results show that the proposed controller is more effective against disturbances caused by wind speed and load variation than the PI controller, and thus it contributes to a better quality wind-diesel hybrid power system.

• International Journal of Internet, Broadcasting and Communication
• /
• 제6권2호
• /
• pp.20-24
• /
• 2014

These days the large-scale car accidents have often been occurred by overspeeding in disregard of sharp curve, foggy and freezing regions. This paper has proposed the algorithm to calculate the safety speed in real time that can protect the car accidents under these weather and road conditions using Fuzzy reasoning theory. Under raining and snowing, drivers have to slow down the traffic safety speed by 1/3 of the traffic safety speed indicated on the existing speed sign plate based on their decision. So it is difficult to calculate and then observe the safety speed. This paper has performed the simulation that provides the deivers with the optimal safety speed considering the road and weather conditions in real time to improve these problems. We have proved this method can improve more 25% than the existing one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.416-421
• /
• 1994

Electric Power system is a large scale nonlinear control one. Therefore, nonlinear control is desirable for the stabilizing, and it is thought that to establish an analytical method for optimal control inputs of AVR(automatic voltage regulator) and GOV(governor) is an important subject. In this paper, as a simple case, one-machine infinite-bus electric power model system with GOV is treated under the three kinds of control inputs; (i) fuzzy control input, (ii) linear control input and (iii) no control input. Next, the stability for each case is analyzed, and the three-dimensional stability regions and control responses are evaluated and compared. Finally, it is concluded that the linear control input does not necessarily give a good region and response, and the fuzzy one is better than others.

• 한국지진공학회논문집
• /
• 제9권1호통권41호
• /
• pp.61-70
• /
• 2005

본 연구에서는 하이브리드 면진장치가 설치된 단자유도 구조물에 대하여 진동대 실험을 수행하였다. 본 연구에서 사용된 하이브리드 면진장치는 네 개의 FPS와 한 개의 MR 감쇠기로 구성하였다. 다양한 크기 및 특성을 가진 지진하중을 하이브리드 면진장치가 설치된 구조물에 가하여 진동제어 성능을 평가하였다. 본 연구에는 준능동 MR 감쇠기의 저항력을 효과적으로 조절하기 위하여 퍼지제어기를 사용하였고 구조물에 부착된 계측기를 통하여 변위 및 가속도를 피드백으로 이용한다. 수동 및 준능동 제어기법을 사용하여 얻은 구조물의 응답을 서로 비교하였고 그 결과 FPS와 MR 감쇠기의 조합으로 다양한 특성의 하중을 받는 구조물의 진동제어를 효과적으로 수행할 수 있음을 알 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.110.4-110
• /
• 2002

In practical control area, there are many examples with multiple objectives which may conflict or compete with each other like overhead crane control, automatic train operation, and refuse incinerator plant control, etc. These kinds of control problems are called multiobjective control problems, where it is difficult to provide the desired performance with control strategies based on single-objective optimization. Because the conventional control theories usually treat the control problem as the single objective optimization problem , the methods are not adequate to treat the multiobjective control problems. Particularly, in case of large scale systems or ill-defined systems, the multiple obj..

• 대한전기학회논문지:전력기술부문A
• /
• 제53권5호
• /
• pp.266-274
• /
• 2004

This paper presents a scheme for the interconnection of dispersed generator systems(DGs) based on load .unbalance and load model in composite distribution systems. Groups of each individual load model consist of residential, industrial, commercial, official and agricultural load. The unbalance is involved with many single-phase line segment. . Voltage profile improvement and system loss minimization by installation of DGs depend greatly on how they are placed and operated in the distribution systems. So, DGs can reduce distribution real power losses and replace large-scale generators if they are placed appropriately in the distribution systems. The main idea of solving fuzzy goal programming is to transform the original objective function and constraints into the equivalent multi-objectives functions with fuzzy sets to evaluate their imprecise nature for the criterion of power loss minimization, the number or total capacity of DGs and the bus voltage deviation, and then solve the problem using genetic algorithm. The method proposed is applied to IEEE 13 bus and 34 bus test systems to demonstrate its effectiveness.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.94-99
• /
• 2012

본 논문은 대규모 비선형 시스템의 분산 샘플치 제어 문제를 논한다. 대상 시스템은 타카기-수게노 퍼지모델로 표현된다. 중복분해 기법을 이용하여 아날로그 분산 제어기를 설계하고 이것은 지능형 디지털 재설계 기법에 의하여 샘플치 제어기로 변환된다. 설계조건은 선형행렬부등식으로 표현된다. 모의실험 결과에 의하여 제안된 기법의 효용성을 입증한다.

• 한국지능시스템학회논문지
• /
• 제12권1호
• /
• pp.80-84
• /
• 2002

본 논문은 2자유도 실험용 헬리콥터 시스템의 제어를 위한 분산 제어기 설계 기법을 제안한다. 분산제어기법은 특히 대규모 제어 시스템에 적합하다고 알려져 있다. 본 논문에서는 Lyapunov 안정도 설계 방법을 이용하여 상호 연결된 TS 퍼지 시스템의 안정도 조건을 유도하고 선형 행렬 부등식을 이용하여 제어기 설계 조건을 공식화한다. 제안된 방법의 유용성을 검증하기 위해, 컴퓨터 시뮬레이션뿐 만 아니라 실험을 통해 그 결과를 도출한다.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.317-326
• /
• 1995

증기발생기의 수위제어시스템에 대해 특히 저출력시 수위제어의 문제점을 분석고찰하고 퍼지제어기 법을 기반으로 한 안정되고도 신속한 수위제어에 관한 연구가 주로 수행되었다. 문제해결의 한 방안으로서, 중요 제어변수임에도 불구하고 저출력운전시 저유량구간의 추정불량으로 인해 사용할 수 없는 유량신호를 대신하여 밸브개도를 이용한 대체정보를 채용하였으며 또한 소속함수크기의 유동적인 조정방법을 이용하여 수위오차가 크게 발생한 과도상태시에는 신속한 수위회복이 이루어지도록 하였다. 실제운전환경에서 제시된 제어기를 튜닝 하기 위한 방법으로서 제어성능지수 및 decent method를 이용한 소속함수의 self-tuning 기법을 제시하였다. 원자력 연구소의 연수원에 설치된 교육훈련용 시뮬레이터에서 수행된 실험결과는 제시된 제어기 및 튜닝방법의 안정되고 우수한 성능구현 및 실질적 인 유용성을 보여주고 있다.