• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.164-168
• /
• 2012

LDPC decoder architectures are generally classified into serial, parallel and partially parallel architectures. Conventional method of LDPC decoding in general give rise to a large number of computation operations, mass power consumption, and decoding delay. It is necessary to reduce the iteration numbers and computation operations without performance degradation. This paper studies Horizontal Shuffle Scheduling (HSS) algorithm. In the result, number of iteration is half than conventional algorithm without performance degradation. Finally, this paper present design methodology of high-speed LDPC decoder and confirmed its throughput is up to about 600Mbps.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.1027-1033
• /
• 2002

The solute transport in a two-dimensional heterogeneous porous medium is numerically studied by using a random walk particle tracking (RWPT) method. Lognormally isotropic hydraulic conductivity fields are generated by using the turning band methods with mean zero and four different values of standard deviation. The numerical transport experiments are carried out to investigate the large time and spatial effects of the variable pore velocity field on solute plumes. The behavior of the solute plume through numerical simulations is presented in terms of longitudinal and transverse spatial moments: displacement of center-of-mass, plume spread variance and skewness coefficient. It was observed that the dispersive behavior of the solute plume is strongly affected by the degree of heterogeneity in the flow domain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1424-1431
• /
• 2004

With traditional experimental methods such as the secondary fluid (e.g., water) calorimetric method, it is very difficult to accurately test the local condensation heat transfer inside mini-channels. Hence, there are large discrepancies between the results of previous studies. The experimental methods as well as unidentified sources of uncertainties could be reasons for such discrepancies. In this study, innovative experimental techniques were developed to measure the in-tube condensation heat transfer coefficient. With these techniques, very low heat dissipation rates such as several watts from the mini-channel could be estimated and low mass flow rates below the 0.1 ㎏/h could be measured with reasonable uncertainties. To the authors' knowledge, these techniques provide a unique experimental apparatus for measuring the condensation heat transfer coefficients inside the sub-millimeter hydraulic diameter single channels.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.897-903
• /
• 2002

The periodic high vibration has been occurred one or two times a day for a 500 MW large steam turbine during 5 months. This abnormal vibration was caused by the rubbing between the rotor and the carbide accumulated on the seal tooth of oil deflector. It was found that the accumulated carbide was insulation material installed on the HIP casing from the examination of the chemical composition. Also, this paper presents the mechanism of the periodic high vibration and the proper method to eliminate this vibration problem. This result would be good practice to find the solution of similar high vibration in the steam turbines for power plant as well as industrial rotating machineries.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.2
• /
• pp.51-55
• /
• 2013

HDD has been easily exposed to the external shock and vibration because HDD has to apply to mobile devices. Therefore, the stiffness of base has been the important factors for the design of HDD. To improve the stiffness of base, the frame was applied to the base. First, the finite element model of the base was constructed. Then, the FE model was verified by modal analysis. Drop test was performed to confirming the shock simulation model. The dynamic characteristic of original base which is verified is compared with the base which is applied the frame through modal analysis and shock analysis.

• Electronics and Telecommunications Trends
• /
• v.34 no.2
• /
• pp.10-18
• /
• 2019

Since the introduction of CRT(Cathode Ray Tube) in the 1950s, display technologies have been developed continuously. Flat panel displays such as PDP(Plasma Display Panel) and LCD(Liquid Crystal Display) were commercialized in the late 1990s, and OLED(Organic Light Emitting Diodes) and Micro-LED(Micro-Light Emitting Diodes) are now being developed and are becoming widespread. In the future, we expect to develop ultra-realistic, flexible, embedded sensor displays. Ultra-realistic display can be applied to AR/VR(Augmented Reality/Virtual Reality) devices and spatial light modulators for holography. The sensor-embedded display can be applied to robots; electronic skin; and security devices, including iris recognition sensors, fingerprint recognition sensors, and tactile sensors. AR/VR technology must be developed to meet technical requirements such as viewing angle, resolution, and refresh rate. Holography requires optical modulation technology that can significantly improve resolution, viewing angle, and modulation method to enable wide-view and high-quality hologram stereoscopic images. For electronic skin, stable mass production technology, large-area arrays, and system integration technologies should be developed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.26-32
• /
• 2021

The antenna is mounted on the vehicle and operated, so its components must be able to withstand the shock that may occur while driving. In this study, the stability of antenna mounted on the vehicle is verified through the connection between modal analysis and transient analysis. The shock data used was taken from MIL-STD-810H, METHOD 516.8. As a result of the analysis of antenna, the maximum equivalent stress 169.49MPa and minimum margin of safety 2.31 has occurred on the bracket of antenna. Thus, it was found that the antenna has enough stability during the operation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2018

The purpose of this study is to systematize various clothing production methods that domestic fashion brands are utilizing to produce fashion products, and to propose effective clothing production methods according to the characteristics. The research methods are contents analysis method of the literatures, articles, reports, and interviewing method of the practitioners who are in charge of the production of fashion. First, the clothing production methods of the domestic fashion brands are categorized as follows. It is divided into a fashion brand management method and a promotion company entrustment method based on who carries out the clothing production and management. The fashion brand management method is subdivided into the 'rental-production', 'CMT', and 'self-production' methods. All three methods are performed at domestic and global sourcing, but the CMT method is more utilized at the global sourcing. The promotion company entrustment method is subdivided into the 'full consignment production method', the 'CMT method involving promotion company', and 'direct buying method by promotion company'. All methods are performed at domestic and global sourcing. Second, the results of reviewing effective clothing production methods, according to characteristics are as follows. If fashion brands control the production and management, they use all three fashion brand management methods. The fashion brands use the promotion company entrustment method when they wants to offer special products, or the number of items is large, or the production management is difficult, or the manpower and equipment size is reduced. The domestic sourcing is utilized by fashion brands and promotion companies when production management is required for high quality apparel production, in case of trendy and complex designs, spot production, and in small quantity production. The global sourcing is utilized by fashion brands and promotion companies when it comes to lowering the production cost, fashion brands preferred the mass production of apparel with design that can be pre-planned.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.18-22
• /
• 2012

The silica-silica interaction parameter (${\alpha}_F$) of the silane treated silica filled natural rubber (NR) compound was investigated. The measured ${\alpha}_F$ values using mass fraction method following Wolff's theory were compared with volume fraction method. As silica concentration increased, the ${\alpha}_F$ value increased for both methods. The value of ${\alpha}_F$ expressed as volume fraction was higher than that of mass fraction, which resulted in large gaps between ${\alpha}_F$ values. The effect of accelerator (MBT) concentration on ${\alpha}_F$ values was compared.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.294-299
• /
• 2006

The Ministry of Environment in Korea has introduced Total Pollution Load Management System (TPLMS) in major 4 large rivers to protect the water quality from possible pollutants. In order to successfully achieve the TPLMS, the nonpoint source should be controled by applying the best management practices in highly polluted areas. Of the various nonpoint sources, the highways are stormwater intensive landuses because of its high imperviousness and high pollutant mass emissions. The EMC (Event Mean Concentration) is an important parameter to correctly determine the pollutant mass loadings from nonpoint sources. However, it has wide ranges because of various reasons such as first flush phenomenon, rainfall and watershed characteristics. Even though the EMC is closely related to the first flush phenomenon, the relationship have not proven until present. Therefore, in this paper, the dynamic EMC method will be introduced to clearly make the relationship between EMC and first flush phenomenon. Also by applying the dynamic EMC method to monitored data, we found that the highly concentrated stormwater runoff was washed off within 20~50 minutes storm duration. The first flush criteria for economical treatment was also determined to 5~10 mm (mean=7.4 mm) as a cumulative rainfall.