• 한국철도학회논문집
• /
• 제12권2호
• /
• pp.321-328
• /
• 2009

기존 터널에 근접하여 절리암반 굴착시 사면의 적절한 보강방법 및 시기는 굴착사면과 터널과의 근접도, 굴착사면 경사는 물론 절리상황에 의해 영향을 받자만 현재까지는 경험적으로 결정되고 있다. 본 연구에서는 터널에 근접하여 절리암반 지반을 굴착시 굴착단계에 따른 굴착사변에서의 하중전이 특성과 터널거동과의 상관관계를 분석하기 위하여 절리각도와 굴착사면 경사를 영향인자로 한 대형 모형시험을 실시하였다. 시험결과, 터널변형은 터널 천정부 또는 바닥부에 근접한 절리면 굴착시 가장 크게 발생을 하였으며, 사면과 터널의 안정성은 굴착사면의 경사와 관련하여 굴착단계에 따라 변화하였다. 향후 본 연구결과를 활용하여 절리암반에서의 터널과 사면의 보강방안을 도출하고자 한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.245-245
• /
• 2015

In the recent years, due to long-lasting heavy rainfall events, a large number of landslides have been observed in the mountainous area of the world. Such landslides can also form a dam as it blocks the course of a river, which may burst and cause a catastrophic flood. Numerical analysis of landslide dam formation is rarely available, while laboratory experimental studies often use assumed shape to analyze the landslide dam failure and flood hydraulics in downstream. In this study, both experimental and numerical studies have been carried out to investigate the formation of landslide dam. Two case laboratory experiments were conducted in two flumes simultaneously. The first flume (2.0 m 0.6 m 0.5 m) was set at $22^{\circ}$ and $27^{\circ}$ slope to generate the landslide using rainfall intensity of 70.0 mm/hr. On the other hand, the second flume (1.5 m 0.25 m 0.3 m) was set perpendicularly at the downstream end of the first flume to receive the landslide mass forming landslide dam. The formation of landslide dam was observed at $15^{\circ}$ slope of the second flume. The whole processes including the landslide initiation and movement of the landslide mass into the second channel was captured by three digital cameras. In numerical analysis, a two-dimensional (2D) seepage flow model, a 2D slope stability model (Spencer method) and a 2D landslide dam-geometry evaluation model were coupled as a single unit. This developed model can determine the landslide occurrence time, the failure mass and the geometry of landslide dam deposited in the second channel. The data obtained from numerical simulation results has good agreement with the experimental measurements.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권4호
• /
• pp.27-32
• /
• 2017

In this study, a remedial investigation using reductive stabilization was conducted to treat Cr(VI)-contaminated soil. The influences of various operational parameters, including reaction time and the mass of ferrous iron, were also evaluated. The study site was contaminated with a large amount of Cr(III) and Cr(VI), and the selected treatment method was to stabilize Cr(VI) with ferrous iron, which reduced Cr(VI) to Cr(III) and stabilized the chromium, although a greater mass of ferrous iron than the stoichiometric amount was required to stabilize the Cr(VI). However, some Cr(III) re-oxidized to Cr(VI) during the drying process, and addition of a strong reducing agent was required to maintain reducing conditions. With this reducing agent, the treated soil met the required regulatory standard, and the mass of Cr(III) re-oxidized to Cr(VI) was significantly reduced, compared to the use of only Fe(II) as a reducing agent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.190-193
• /
• 2002

The processing technology of organic thin-film transistors (Ons) performances have improved fur the last decade. Gate insulator layer has generally used inorganic layer, such as silicon oxide which has properties of a low electrical conductivity and a high breakdown field. However, inorganic insulating layers, which are formed at high temperature, may affect other layers termed on a substrate through preceding processes. On the other hand, organic insulating layers, which are formed at low temperature, dose not affect pre-process. Known wet-processing methods for fabricating organic insulating layers include a spin coating, dipping and Langmuir-Blodgett film processes. In this paper, we propose the new dry-processing method of organic gate dielectric film in field-effect transistors. Vapor deposition polymerization (VDP) that is mainly used to the conducting polymers is introduced to form the gate dielectric. This method is appropriate to mass production in various end-user applications, for example, flat panel displays, because it has the advantages of shadow mask patterning and in-situ dry process with flexible low-cost large area displays. Also we fabricated four by four active pixels with all-organic thin-film transistors and phosphorescent organic light emitting devices.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1825-1828
• /
• 2008

A simple method for the fabrication of porous nano-master for antireflective surface is presented. In conventional fabrication methods for antireflective surface, coating method with low refractive index has usually been used. However, it is required to have high cost and long times for mass production. In this paper, we suggested the fabrication method of antireflective surface by the hot embossing process using the porous nano patterned master on silicon wafer fabricated by low-temperature anodic aluminum oxidation. Through multi-AAO and etching processes, nano patterned master with high aspect ratio was fabricated at the large area. Pore diameter and inter-pore distance are about 150nm and from 150 to 200nm. In order to replicate anti-reflective structure, hot embossing process was performed by varying the processing parameters such as temperature, pressure and embossing time etc. Finally, antireflective surface can be successfully obtained after etching process to remove selectively silicon layer of AAO master.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권6호
• /
• pp.530-538
• /
• 2007

현존하는 추론 엔진들은 대부분 Tableaux 알고리즘 기반의 TBox의 최적화를 위한 연구를 진행하였다. 하지만 현실에서 대용량의 ABox를 추론하기 위해서는 유한한 시간 내에 결정 가능하지 못하다. 따라서 실용성 있는 추론 엔진 효율을 위해서는 대용량 데이타를 가지는 ABox를 위한 최적화된 추론 기법이 필요하다. 본 논문에서는 OWL-DL 기반의 온톨로지(Ontology)를 데이타로그(Datalog)와 같은 규칙(Rule) 형태로 변형하여 관계형 데이타베이스와 같은 저장장치와 연동하기 위한 방법을 이용한다. 최종적으로 실세계의 환경에서의 데이타타입 속성(Datatype Property)이 포함된 SHIQ(D) 구성의 실용적인 지식 표현 시스템을 수행하고자 한다. 따라서 OWL이 가지는 공리(Axiom)를 이용한 데이타타입이 포함된 규칙을 적용한 추론 방법에 대해서 제안하였다.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.108-114
• /
• 1997

Concrete is said to have a high degree of extensibility when it is subjected to large deformations without cracking. The cracking behavior of concrete in the field may even be more complex. For example, in mass concrete compressive stresses are developed during the very early period when temperatures are rising, and the tensile stresses do not develop until at a later age when the temperature begins to decline. Actual cracking and failure depend on the combination of factors and indeed it is rarely that a single adverse factor is responsible for cracking of concrete. The importance of cracking and the minimum width at which a crack is considered significant depend on the conditions of exposure of the concrete. The ultrasonic pulse measurements can be used to detect the development of cracks in structures such as dams, and to check deterioration due to frost or chemical action. An estimate of the depth of a crack visible at the surface can be obtained by measuring the transit times across the crack for two different arrangements of the transducers placed on the surface. In this paper, the concrete cracks that artificially introduced crack width is 1 and 2mm, crack depth is 2, 4, 6, 8cm were measured by Tc-To Method In consequence, the measured depth was increased with increase of measuring distance from concrete crack. The most reliable results were shown when the introduced crack width was 1mm, and the measuring distance was 10cm from concrete crack.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1074-1085
• /
• 2004

There are many intermediate web guides in cold rolling mills process such as CRM (cold rolling mill), CGL (continuous galvanizing line), EGL (electrical galvanizing line) and so on. The main functions of the web guides are to adjust the center line of the web (strip) to the center line of the steel process. So they are called CPC (center position control). Rapid process speed cause large deviation between the center position of the strip and the process line. Too much deviation is not desirable. So the difference between the center position of the strip and the process line should be compensated. In general, the center position control of the web is obtained by the hydraulic driver and electrical controller. In this paper, we propose modelling and several controller designs for web-guide systems. We model the web and guide by using geometrical relations of the guide ignored the mass and stiffness of the web. To control the systems, we propose PID controllers with their gains tuned by the Ziegler-Nichols method, the H$\_$$\infty$/ controller model-matching method, and the coefficient diagram method (CDM). CDM is modified for high order systems. The results are verified by computer simulations.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.125-130
• /
• 2016

In this paper, we deal with the dynamic walking of a humanoid robot. In our method, the inverted pendulum model is used as a dynamic model for a humanoid robot in which the Zero Moment Point (ZMP) and COG constraints of the robot are analyzed by considering the motion of the robot as that of an inverted pendulum. The motion of a humanoid robot should be generated by considering the dynamics of the robot, which commonly requires a large amount of computation. If a robot walks from one position to another while keeping the ZMP in the stable region, then the robot remains dynamically stable. The linear inverted pendulum model regards the whole robot as a point mass. It is simple, and relatively less computation is needed; however, it cannot model the whole dynamics of a humanoid robot. We propose a method for modeling a humanoid robot as an inverted pendulum system having 14 point masses. We also show that the dynamic stability of a humanoid robot can be determined more precisely by our method.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.76-82
• /
• 2010

In this study, we carried out to evaluate the shock-proof of a large scale motor for the naval vessel using dynamic design analysis method (DDAM) and full transient dynamic analysis. Analytical models for main assemblies (motor frame, rotor and stator assembly) were consisted of the tetrahedral solid elements and the equipments which installed in the upper side of the motor were substituted the mass elements. And we also modelled resilient mounts of a motor using the beam elements with appropriate directional stiffness. The DDAM was conducted according to NRL memorandum report 1396 and the full transient dynamic analysis was performed applying directional triple half triangle shock wave to the motor using ANSYS 12. As a result, we could compare of the results according to each analytic method and find the motor to satisfy the design criteria of the maximum stress and deformation.