• Plant Resources
• /
• 제6권3호
• /
• pp.159-164
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in malting barley. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly varation of the amount of precipitation in December and January were large with coefficients of variation(c. v.) of 97.9, 51.3%, respectively, but the variation of the maximum temperature and minimum temperature in April were relative small. Yield, weight of 1,000 grains and culm length were greatly with c. v. of 37.3, 49.3 and 41.3%, respectively. spike length and number of spikes show more or less c. v. of 3.8, 24.7% respectively and number of grains per spike show still less variation with c. v. of 9.4%. Correlation coefficients between temperature of mean, maximum and minimum in February and seed yield and yield components were positively significant at level of 5.1%, respectively. Correlation coefficients between precipitation of April and seed yield were positively significant correlation at the level of 5.1 %, respectively, but the duration of sunshine in April and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of those, yield components and yield, culm length, spike length, number of grains per spike, number of spikes per $m^2$, weight of 1,000 grains and seed yield were positively significant at the level of 5.1 % respectively.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.73-78
• /
• 2019

Lead free $(Ba_{0.7}Ca_{0.3})TiO_3$ thick films with nano-sized grains are prepared using an aerosol deposition (AD) method at room temperature. The crystallinity of the AD thick films is enhanced by a post annealing process. Contrary to the sharp phase transition of bulk ceramics that has been reported, AD films show broad phase transition behaviors due to the nano-sized grains. The polarization-electric hysteresis loop of annealed AD film shows ferroelectric behaviors. With an increase in annealing temperature, the saturation polarization increases because of an increase in crystallinity. However, the remnant polarization and cohesive field are not affected by the annealing temperature. BCT AD thick films annealed at $700^{\circ}C/2h$ have an energy density of $1.84J/cm^3$ and a charge-discharge efficiency of 69.9 %, which is much higher than those of bulk ceramic with the same composition. The higher energy storage properties are likely due to the increase in the breakdown field from a large number of grain boundaries of nano-sized grains.

• 천문학회보
• /
• 제46권2호
• /
• pp.38.1-38.1
• /
• 2021

Dust polarization depends on the physical and mechanical properties of dust, as well as the properties of local environments. To understand how dust polarization varies with grain mechanical properties and the local environment, in this paper, we model the wavelength-dependence polarization of starlight and polarized dust emission by aligned grains by simultaneously taking into account grain alignment and rotational disruption by radiative torques (RATs). We explore a wide range of the local radiation field and grain mechanical properties characterized by tensile strength. We find that the maximum polarization and the peak wavelength shift to shorter wavelengths as the radiation strength U increases due to the enhanced alignment of small grains. Grain rotational disruption by RATs tends to decrease the optical-near infrared polarization but increases the ultraviolet polarization of starlight due to the conversion of large grains into smaller ones. In particular, we find that the submillimeter (submm) polarization degree at 850㎛(P850) does not increase monotonically with the radiation strength or grain temperature (Td), but it depends on the tensile strength of grain materials. Our physical model of dust polarization can be tested with observations toward star-forming regions or molecular clouds irradiated by a nearby star, which have higher radiation intensity than the average interstellar radiation field. Finally, we compare our predictions of the P850-Td relationship with Planck data and find that the observed decrease of P850 with Td can be explained when grain disruption by RATs is accounted for, suggesting that interstellar grains unlikely to have a compact structure but perhaps a composite one. The variation of the submm polarization with U (or Td)can provide a valuable constraint on the internal structures of cosmic dust

• 지질공학
• /
• 제20권2호
• /
• pp.183-189
• /
• 2010

제3기 분지의 경계단층을 따라 발달하는 단층핵에서 단층비지 시료를 채취하여 현미경하에서 잔류입자들의 미구조 관찰과 잔류입자들을 이용한 프랙탈 차원 분석을 수행하였다. 타원형의 잔류입자들은 기질의 점토엽리(P엽리)에 평행 내지 아평행하게 형태선택배향을 이루는데 이는 풍부한 기질의 미세 입자 속에서 지속적인 단층 슬립 동안 회전에 의해 이루어진 것으로 생각된다. 잔류입자 크기 분포는 2.40-3.02 범위의 프랙탈 차원(D)을 갖는 멱 법칙을 따른다. 여기서 한 개의 시료를 제외한 모든 시료들은 Sammis et al. (1987)의 자기유사 파쇄 과정을 예측한 구속 분쇄 모델의 특정 차원 값 2.58보다 높은 값을 보이며 큰 단층 슬립과 다중단층작용을 지시한다. 아마도 비지대의 높은 차원 값은 구속 분쇄모델의 적용 범주를 지난 후부터는 파쇄 기구가 바뀌어 입자마모와 이에 부수적으로 조립입자의 선택적 파쇄가 일어남에 기인한 단층암의 비 자기유사 진화를 지시한다. 단층핵의 파쇄 진화를 통하여 후기의 입자마모 동안에 입자 파쇄가 부수적으로 일어날 수 있는 것과 마찬가지로 조기의 대량 파쇄 동안에도 부분적으로 입자마모가 수반될 수 있을 것으로 생각된다.

• Journal of Microbiology and Biotechnology
• /
• 제26권1호
• /
• pp.20-27
• /
• 2016

Lactobacillus kefiranofaciens ZW3 was obtained from kefir grains, which have high lactose hydrolytic activity. In this study, a heterodimeric LacLM-type β-galactosidase gene (lacLM) from ZW3 was isolated, which was composed of two overlapping genes, lacL (1,884 bp) and lacM (960 bp) encoding large and small subunits with calculated molecular masses of 73,620 and 35,682 Da, respectively. LacLM, LacL, and LacM were expressed in Escherichia coli BL21(DE3) and these recombinant proteins were purified and characterized. The results showed that, compared with the recombinant holoenzyme, the recombinant large subunit exhibits obviously lower thermostability and hydrolytic activity. Moreover, the optimal temperature and pH of the holoenzyme and large subunit are 60℃ and 7.0, and 50℃ and 8.0, respectively. However, the recombinant small subunit alone has no activity. Interestingly, the activity and thermostability of the large subunit were greatly improved after mixing it with the recombinant small subunit. Therefore, the results suggest that the small subunit might play an important role in maintaining the stability of the structure of the catalytic center located in the large subunit.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.254-255
• /
• 2012

Interest in nano-crystalline silicon (nc-Si) thin films has been growing because of their favorable processing conditions for certain electronic devices. In particular, there has been an increase in the use of nc-Si thin films in photovoltaics for large solar cell panels and in thin film transistors for large flat panel displays. One of the most important material properties for these device applications is the macroscopic charge-carrier mobility. Hydrogenated amorphous silicon (a-Si:H) or nc-Si is a basic material in thin film transistors (TFTs). However, a-Si:H based devices have low carrier mobility and bias instability due to their metastable properties. The large number of trap sites and incomplete hydrogen passivation of a-Si:H film produce limited carrier transport. The basic electrical properties, including the carrier mobility and stability, of nc-Si TFTs might be superior to those of a-Si:H thin film. However, typical nc-Si thin films tend to have mobilities similar to a-Si films, although changes in the processing conditions can enhance the mobility. In polycrystalline silicon (poly-Si) thin films, the performance of the devices is strongly influenced by the boundaries between neighboring crystalline grains. These grain boundaries limit the conductance of macroscopic regions comprised of multiple grains. In much of the work on poly-Si thin films, it was shown that the performance of TFTs was largely determined by the number and location of the grain boundaries within the channel. Hence, efforts were made to reduce the total number of grain boundaries by increasing the average grain size. However, even a small number of grain boundaries can significantly reduce the macroscopic charge carrier mobility. The nano-crystalline or polymorphous-Si development for TFT and solar cells have been employed to compensate for disadvantage inherent to a-Si and micro-crystalline silicon (${\mu}$-Si). Recently, a novel process for deposition of nano-crystralline silicon (nc-Si) thin films at room temperature was developed using neutral beam assisted chemical vapor deposition (NBaCVD) with a neutral particle beam (NPB) source, which controls the energy of incident neutral particles in the range of 1~300 eV in order to enhance the atomic activation and crystalline of thin films at room temperature. In previous our experiments, we verified favorable properties of nc-Si thin films for certain electronic devices. During the formation of the nc-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. The more resent work on nc-Si thin film transistors (TFT) was done. We identified the performance of nc-Si TFT active channeal layers. The dependence of the performance of nc-Si TFT on the primary process parameters is explored. Raman, FT-IR and transmission electron microscope (TEM) were used to study the microstructures and the crystalline volume fraction of nc-Si films. The electric properties were investigated on Cr/SiO2/nc-Si metal-oxide-semiconductor (MOS) capacitors.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.949-955
• /
• 1992

R-curves, fracture resistance (KR) as a function of crack extension (Δa), of a gas-pressure sintered monolithic Si3N4 were determined by controlled flaw/strength technique. Rising R-curve behavior was observed, confirming the operation of microstructural toughening process during crack growth. The R-curve parameters, k and m in the equation, KR=k(Δa)m, were determined to 30.301 and 0.1146, respectively. Microstructural observation of growing crack revealed that the bridging in the crack wake by unbroken ligament of large elongated ${\beta}$-grains was the mechanism primarily for the rising R-curve behavior.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1739-1743
• /
• 2006

Recent advances in the microstructural modification of metal films using excimer laser projection irradiation and lateral resolidification are discussed. Pure copper films have been directionally resolidified into large sheet-like grains when properly encapsulated for suppression of liquid-phase dewetting. A survey and quantitative assessment of the defects found in these icrostructures, typical for rapidly solidified metals, is presented.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2001년도 춘계 학술발표논문집
• /
• pp.77-80
• /
• 2001

In many temperate forest ecosystems, large quantities of pine pollen are deposited over a short period in early summer (Doskey and Ugoagwu 1989). Because pollen grains decompose rapidly and have macronutrient concentrations, the pollen rain may be an important component of nutrient dynamics in natural terrestrial and aquatic ecosystems (Stark 1972).(omitted)

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.178-184
• /
• 1995

A new combined isotropic/kinematic and orthotropic hardening viscoplastic model is proposed which can account for not only differential orientations but also preferred orientations of grains in n metal at finite plastic deformations with an introduction of multiple spin (rate of rotation) concept within the general framework of the model, the effects of anisotropy and constitutive spins will be discussed in conjunction with a closed-form solution for simple shear in n rigid-plastic material, which will be used to simulate experimental data of Montheillet, et al. (1984) for fixed-end tortion tests at finite plastic deformations.