Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.
The present work proposes an improved numerical simulator for design and modification of large area capacitively coupled plasma (CCP) processing chamber. CCP, as notoriously well-known, demands the tremendously huge computational cost for carrying out transient analyses in realistic multi-dimensional models, because electron dissociations take place in a much smaller time scale (${\Delta}t{\approx}10-8{\sim}10-10$) than time scale of those happened between neutrals (${\Delta}t{\approx}10-1{\sim}10-3$), due to the rf drive frequencies of external electric field. And also, for spatial discretization of electron flux (Je), exponential scheme such as Scharfetter-Gummel method needs to be used in order to alleviate the numerical stiffness and resolve exponential change of spatial distribution of electron temperature (Te) and electron number density (Ne) in the vicinity of electrodes. Due to such computational intractability, it is prohibited to simulate CCP deposition in a three-dimension within acceptable calculation runtimes (<24 h). Under the situation where process conditions require thickness non-uniformity below 5%, however, detailed flow features of reactive gases induced from three-dimensional geometric effects such as gas distribution through the perforated plates (showerhead) should be considered. Without considering plasma chemistry, we therefore simulated flow, temperature and species fields in three-dimensional geometry first, and then, based on that data, boundary conditions of two-dimensional plasma discharge model are set. In the particular case of SiH4-NH3-N2-He CCP discharge to produce deposition of SiNxHy thin film, a cylindrical showerhead electrode reactor was studied by numerical modeling of mass, momentum and energy transports for charged particles in an axi-symmetric geometry. By solving transport equations of electron and radicals simultaneously, we observed that the way how source gases are consumed in the non-isothermal flow field and such consequences on active species production were outlined as playing the leading parts in the processes. As an example of application of the model for the prediction of the deposited thickness uniformity in a 300 mm wafer plasma processing chamber, the results were compared with the experimentally measured deposition profiles along the radius of the wafer varying inter-electrode gap. The simulation results were in good agreement with experimental data.
(Bi1/2Na1/2)TiO3 (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi1/2Na1/2TiO3-0.02 BiAlO3-xSrTiO3 (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-${\underline{2}}$BA-100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.
최근 국제적으로 신재생 에너지 개발이 활발함에 따라 풍력발전의 비중이 확대되고 있다. 특히 고품질의 풍력자원을 이용하고 소음 피해를 최소화하기 위하여 해안에서 멀리 떨어진 해역에 대규모 풍력단지가 조성되는 추세이다. 해상에 풍력단지가 건설됨에 따라 영해나 영공 감시를 위한 레이더에 간섭을 일으키는 문제 이외에도 해상에서 육상으로 송신하는 조난통신을 간섭하는 지에 대한 분석이 필요하다. 이를 위해서 본 연구에서는 선박에서 MF 또는 HF 대역의 전자파를 송신할 경우, 선박과 육상 기지국 사이에 위치한 해상풍력 발전단지가 송신된 전자파에 대한 간섭 여부를 분석하였다. 이를 위해 대상지역을 수치지형도와 풍력발전기 CAD모델을 활용하여 주변 환경 및 해상풍력 발전단지를 전자기학적으로 모델링하였다. 파장에 비해 광범위한 지역에 대한 전파 분석이므로 고주파 분석기법이 타당하나, 적용할 고주파 분석기법을 주변해역과 지형을 간략화하여 저주파 분석기법으로 먼저 검증하였다. 해상풍력 발전단지 부근에서 송신한 신호에 대해 육상기지국에서 수신한 전력을 분석한 결과, 발전단지가 설치되더라도 거의 동일한 수준으로 전파를 수신할 수 있었다. 이는 풍력발전기가 대형 구조물이기는 하나 타워의 직경은 수 미터에 불과하므로 지향성이 없고 파장이 긴 MF 및 HF 대역에 대해서는 큰 장애물로 작용하지 않기 때문으로 판단된다.
Traveling heater method(THM) 방법을 이용하여 성장시킨 CdZnTe(CZT) 단결정 방사선 소자에 대한 고에너지(high energy) 감마선 에너지 분해능(energy resolution)을 평가하고자 $6{\times}6{\times}12mm^3$ 크기의 CZT 소자를 제작하였다. 두꺼운 방사선 소자의 경우, 전자에 비해 상대적으로 이동속도가 느린 정공(hole)으로 인해 발생하는 hole-tailing 효과가 심화되어 고에너지 영역의 에너지 분해능이 저하되는 현상이 발생한다. 전자(electron)와 정공(hole)의 두 개의 전하 운반자(charge carrier) 중에서 하나의 전하 운반자를 선택적으로 수집하여 에너지 분해능을 높이는 것이 가능하다. 가상 Frisch-그리드(virtual Frisch-grid) 소자는 소자 내부의 가중 퍼텐셜(weighting potential)을 조절하여 전자에 의한 유도전류(induced current)만을 선택적으로 이용하는 방법으로써 제작 과정과 적용이 용이하다. 본 연구에서는 THM 방법으로 성장한 큰 부피의 CZT 방사선 소자의 특성과 가상 Frisch-그리드의 효용성을 평가하였다. 가상 Frisch-그리드의 적절한 위치와 너비는 Maxwell ver.14(ANSYS, 미국)를 이용하여 모의실험으로 정하였다. $^{137}Cs$ 동위원소를 이용한 펄스 높이 스펙트럼(pulse height spectrum) 측정에서 가상 Frisch-그리드를 적용했을 때 662 keV 피크에 대해 2.2%의 에너지 분해능을 확인할 수 있었다.
Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.
융합기술 개발에 대한 선진국들의 관심이 고조되는 가운데 우리나라의 융합기술 분야의 경쟁력 강화를 위한 전략적 기술개발의 접근으로, 기술 및 산업분야에 미치는 후생적 파급효과가 큰 핵심융합기술을 발굴할 수 있는 방법론이 요구된다. 본 연구에서는 특허의 기술융합수준을 후생적으로 타기술분야들을 연계하는 파급효과 수준으로 정의하고, 스마트공장의 ICT 융합기술 분야 1,124개 미국출원특허를 이용한 특허 인용 네트워크 분석을 통하여, IPC 기술분야 네트워크로부터 산출한 IPC 기술분야 매개중심성 지수를 이용하여 해당 특허의 기술융합수준을 측정하는 이종분야 기술융합지수를 소개하였다. 본 연구에서 제안한 이종분야 기술융합지수와 중재자역할 지표와의 상관관계를 분석한 결과, 다른 지수들 (타분야비율지수 및 동종분야 기술융합지수) 대비 이종분야 기술융합지수가 후생적으로 다른 기술분야들을 연계하는 파급효과 차원의 융합특성을 측정하는 지수임이 확인되었다. 제안한 이종분야 기술융합지수를 이용하여 정부부처에서 제시한 스마트공장의 주요 ICT기술 전략분야들 중 핵심 ICT 융합기술분야들을 분석한 결과, '제조실행분석 애플리케이션'을 포함한 6개의 핵심 ICT융합 기술분야들을 도출하였다. 추가로 '제조실행분석 애플리케이션'에 속한 특허들의 IPC들을 대상으로 블록모델링 분석한 결과, '전자통신기술'과 '전자 디지털데이터 처리기술'로 대표되는 블록들(블록 3&4)이 핵심기술과 융합 가능한 관련 기술분야임을 확인하였다. 본 연구의 결과에 근거하여 스마트공장의 융합기술 개발방안에 대한 정책적 시사점을 제공하였다.
RF magnetron reactive sputtering법으로 CoFeHfO 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 이방성자계를 조사하였다. 최적조건인 산소분압 8%에서 제조한 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막은 포자자속밀도($4{\pi}M_s$) 19kG, 보자력($H_c$) 0.37Oe, 이방성자계($H_k$) 48.62Oe의 우수한 연자성을 나타내었다. CoFeHfO 박막의 전기비저항은 산소분압이 늘어남에 따라 증가하는 경향을 나타내었으며 우수한 연자기적 성질을 가지는 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ 박막의 경우, 300 ${\mu}{\Omega}cm$의 높은 전기비저항과 48.62 Oe의 높은 이방성자계 때문에 $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$박막이 고주파에서 우수한 연자기 특성을 가지는 것으로 사료된다.
적분방정식법은 매우 강력한 3차원 전자탐사 모델링 기법이다. 그러나 이 방법은 이상체내의 전기장 계산시 대형 선형방정식의 해를 구해야 하므로 계산시간이 많이 소요된다는 단점이 있다. 특히 3차원 역산의 경우에는 이러한 적분방정식의 단점은 치명적이 될 수밖에 없다. 이상체내의 전기장을 1차장으로 가정하는 통상적인 Born 근사법은 계산이 용이하고 속도가 빠르다는 장점이 있다. 그러나 이 방법은 이상체와 모암간의 전기전도도비가 너무 클 경우에는 정확성에 문제가 있다. 준선형, 준해석 및 확장된 Born 근사는 이상체내의 전기장 계산을 위한 적분방정식을 선형화한 방법으로 적분방정식법에 비하여 계산시간이 빠르고 통상의 Born 근사에 비해서는 정확성이 높은 매우 훌릉한 3차원 전자탐사 모델링 기법이다. 그러나 이들 또한 근본적으로 근사법에 해당되므로 정확성을 향상시킬 필요가 있다. 근사법의 정확성을 높이기 위한 방법으로 반복적 방법을 사용하는 급수 전개법이 동원되며, 이 방법에는 수정 Born 급수, 준선형 급수 및 준해석 급수 등이 있다. 이들 급수 전개법은 적분방정식법 및 여러 근사법과 비교해 볼 때 매우 정확하고 비교적 빠르며, 항상 수렴하여 그 효율성이 높은 것으로 나타났다. 또한 급수 전개법은 전산프로그램의 작성이 용이하다는 장점도 있다. 본 연구에서는 이를 확장된 Born 급수 전개법으로 화장하여 보다 정확한 결과를 얻을 수 있었다. 따라서 확장된 Born 급수법을 포함하는 각종 급수 전개법은 향후 3차원 전자탐사 모델링 및 역산에 적용 가능한 빠르고 정확한 모델링 기법으로 기대된다.
지구 온난화와 기후변화에 대응하기 위해 국제적으로 재생 에너지의 개발이 확대됨에 따라 풍력발전의 비중도 점차 늘어가고 있다. 태양광발전에 비해 24시간 생산이 가능하지만 대형 풍력발전기를 대규모로 설치하기 때문에 주변의 레이더나 통신 장비들의 동작에 간섭을 일으키는 지에 대한 분석이 필요하다. 본 연구에서는 해상풍력 발전단지 외해를 항해하는 선박이 VHF 대역으로 조난 통신을 송신할 경우, 육지의 기지국에서 신호를 수신할 수 있는지를 분석하였다. 대상지역 주변의 수치지형도, 풍력발전기 캐드 모델, 풍력발전단지 배치도를 바탕으로 주변 해역 및 발전단지를 수치해석이 가능하도록 모델링하였다. 광범위한 지역에 대한 전파 분석에 적절한 고주파 해석기법 중 PO, SBR 기법을 적용한 전용 프로그램으로 전자파 간섭 여부를 분석하였다. 해상풍력 발전단지 외곽에서 송신한 VHF 대역 전자파에 대해 육상 기지국에서는 약간의 수신전력 저하는 있지만 기준치 이상의 전력을 수신하였다. 선박과 육상 기지국 사이의 가시선을 완전히 가리는 경우에 수신 전력의 저하가 발생하였으나, VHF대역이 파장이 길어 회절이나 반사 등의 효과로 육상 기지국까지 충분한 전파가 도달하는 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.