• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.131-138
• /
• 2012

PURPOSES : Two-lane highways have one lane in each direction, and lane changing and passing maneuvers take place in the opposing lane depending on the availability of passing sight distance. 2001 Korea Highway Capacity Manual (KHCM) is classified into two classes of two-lane highways (Type I, II), and average travel speed and time-delayed rate are used as measures of effectiveness (MOEs). However, since existing two-lane highways have both uninterrupted and interrupted traffic flow-system elements, a variety of free-flow speeds exhibits in two-lane highways. In addition, it is necessary to check if the linear-relationship between volumes and time-delayed rate is appropriate. Then, this study is to reestablish the relationship between average travel speed, time-delayed rate, and flow. METHODS : TWOPAS model was selected to conduct this study, and the free-flow speeds of passenger cars and the percentage of following vehicles observed in two-lane highways were applied to the model as the input. The revised relationships were developed from the computer simulation. RESULTS : In the revised average travel speed vs. flow relationship, the free-flow speed of 90km/h and 70km/h were added. It shows that the relationship between time delayed-rate and flow appeared to be appropriate with the log-function form and that there was no difference in time-delayed rate between the free flow speeds. In addition to revise the relationships, the speed prediction model and the time-delayed rate prediction model were also developed. CONCLUSIONS : The revised relationships between average travel speed, time-delayed rate, and flow would be useful in estimating the Level of Service(LOS) of a two-lane highway.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.69-75
• /
• 2022

In this paper, a method for predicting the speed for each lane from the link speed using an artificial neural network is presented to increase the accuracy of predicting the required time of a driving route. The time required for passing through a link is observed differently depending on the direction of going straight, turning right, or turning left at the intersection of the end of the link. Therefore, it is necessary to predict the speed according to the vehicle's traveling direction. Data required for learning and verification were constructed by refining the data measured at the Gongpyeong intersection of Gukchaebosang-ro in Daegu Metropolitan City and four adjacent intersections around it. Five neural network models were used. In addition, error analysis of the prediction was performed to select a neural network experimentally suitable for the research purpose. Experimental results showed that the error in the estimation of the time required for each lane decreased by 17.4% for the straight lane, 4.4% for the right-turn lane, and 3.9% for the left-turn lane. This experiment is the result of analyzing only one link. If the entire pathway is tested, the effect is expected to be greater.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.137-149
• /
• 1994

The objective of study is to evaluate the effect of speed control hump on traffic operation and accidents. Three sites were investigated for the change of traffic accidents before and after the hump installation. Vehicle speeds approaching the hump were also analyzed. The study revealed that not only the number of traffic accidents but also the accident severity were significantly reduced by the installation of hump. Further, different types of traffic accidents with lower severity were observed after the hump installation. For the effect of speed reduction by hump, it was found that the speeds observed at 15m upstream of hump were in the range of 36~50 percent of approaching speeds which were not affected by (ie, without) the hump. Economic analysis of hump installation showed the benefit-cost ratio of 4.3 and 11.2 at two sites. Further analysis revealed that the benefit by the accident reduction exceeds the cost by speed reduction and installation capital if AADT is below 43,150 vehicles on two lane highways. It is recommended from the study that humps should be considered on two lane highways of high accident locations for excessive speeds to reduce traffic accidents and severity.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.151-172
• /
• 1994

The objective of study is to evaluate design standards related to the allowable truck speeds, taper length and sign requirements together with the operating practices and economic justification for climbing lanes. Field surveys were carried out on seven climbing lanes, three on two-lane and four on four-lane freeways. Data collected are traffic volume, speed, usage rate and delay. It is found that current design criteria for determining the length of climbing lane, taper lengths, and traffic sign requirements must be upgraded. It is also recommended that regulations on the use of climbing lane be established to make it more effective. Further, economic analysis revealed that the climbing lane is economically justified for two-lane and four-lane freeway if the AADT is over 4,577 and 5,116 vehicles respectively.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.69-74
• /
• 2013

LKAS(Lane Keeping Assistance System) main function is to support the driver in keeping the vehicle within the current lane. Therefore, this system is able to reduce the driver workload with assisting the driver during driving. In this paper, we presented on study for test procedures and evaluation methods of the LKAS. The vehicle test conducted on straight road, left curve, right curve and four different types of lane under various vehicle speeds. This study proposed the LKAS system test procedures and methods that we are able to identify LKAS driving mechanism and performance.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.5
• /
• pp.9-15
• /
• 2023

In this paper, we propose a method predicting the speed of each lane from the link speed using a neural network. We took three measures for configuring learning data to increase prediction accuracy. The first one is to expand the spatial range of the data source by including 14 links connected to the beginning and end points of the link. We also increased the time interval from 07:00 to 22:00 and included the data generation time in the feature data. Finally, we marked weekdays and holidays. Results of experiments showed that the speed error was reduced by 21.9% from 6.4 km/h to 5.0 km/h for straight lane, by 12.9% from 8.5 km/h to 7.4 km/h for right turns, and by 5.7% from 8.7 km/h to 8.2 km/h for left-turns. As a secondary result, we confirmed that the prediction accuracy of each lane was high for city roads when the traffic flow was congested. The feature of the proposed method is that it predicts traffic conditions for each lane improving the accuracy of prediction.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.19-28
• /
• 1999

This study deals with developing Critical GaP Model and Merge Probability Model which describe traffic patterns in the microscopic view, for the Purpose of suggesting a proper design criteria within the climbing lane section. Minimum tolerance speeds at the end of the climbing lane are calculated 60km/hr for 2-lane freeway, and 75km/hr for 4-lane freeway. In case of 2-lane freeway, the result is same as existing design criteria. and a new value is 15km/hr higher than existing design criteria for 4-lane freeway. In addition, auxiliary length at the end of the climbing lane is needed about 200m for 4-lane freeway to adjust high minimum tolerance speed. Therefore we propose to increase minimum tolerance speed for 4-lane freeway.

• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.51-56
• /
• 2016

Expressways mean the primary arterial highways with a high level of efficiency and safety. However, Gyeongbu and Namhae expressways connected with Busan ports are showing travel time delay by increased traffic including the medium/large-sized vehicles of about 20% compared to those of about 13% regardless of the peak periods. This study, thus, intends to analyze lane traffic characteristics in the basic 8-lane segments of the above-mentioned expressways, compute the planning and buffer times based on travel time reliability, find the lane speed showing a higher correlation with planning time between the lane speeds in the basic 8-lane segments, and finally suggest a correlation model for predicting the planning time in expressways.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.591-597
• /
• 2012

Generally an urban freeway means a primary arterial which provides road users with a free-flow speed, except for ramp junctions during rush hours. However, most road users suffer from traffic congestion in the basic segments as well as in the ramp junctions of urban freeway during rush hours, because most road users prefer urban freeways to local roads in the urban areas. This study then intends to analyze lane traffic characteristics of urban freeway basic segments having more freight vehicles during rush hours, find the lane showing a high correlation with the segment speed between lane speeds, and finally suggest a segment-speed predictive model by the lane speed of urban freeway basic segments during rush hours.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.33-46
• /
• 2008

A two-lane highway has a high rate of head-on collisions, sideswipe collisions, crashes with an fixed object. This study was to analyze the weakness of a cross section and a horizontal curve in a two-lane highway and find countermeasures to improve the traffic operations and safety. This study evaluated the effectiveness of widening, curve flattening and superelevation, verified it with a case study and assessed the economical efficiency. This study selected the difference between tangent section operating speeds and curve section operating speeds as an evaluation index of horizontal curve section in a two-lane highway. The results indicated that curve flattening is the best way to improve the traffic safety in a two-lane highway. This study has implication that it provides the quantitative effects of curve flattening. Also directions for future study were discussed.