• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2016

PURPOSES : This study supports the evidence that it is possible to rehabilitate a damaged pavement with a lane closure specifically based on the Gimcheon~Sunsan project. METHODS : The prediction results from the simulation programs were compared with field monitoring, which focused on traffic management planning, congestion (length, time, and passing speed), bypass, and user cost, among others. RESULTS : The research results showed that lane closure application and pavement repair of the aged pavement in Korea were possible, even though the prediction results were minimally different from the field monitoring. The road agency contributes to service life extension of the rehabilitated pavement using this method. CONCLUSIONS : A marginal effect caused by the lane closure was observed on travelling users or vehicles, and the user cost of pavement repair decreased. Therefore, introducing the repair method or rehabilitation in Korea is possible. Information dissemination through various media was properly done to execute the project well. Moreover, the construction area traffic utilized nearby alternative roads. Therefore, improving the repaired pavemen's service life while ensuring that the pavement management agency can provide a road with comfortable user riding quality was possible.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.279-284
• /
• 2009

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.17-28
• /
• 2010

A climbing lane is installed to separate low-speed traffic from high-speed traffic if drastic traffic capacity reduction is expected due to a large number of vehicles that slow down in the upward section. Existing studies on climbing lanes have focused on the designation, location of starting and ending points, and installation method of climbing lane with regard to road design standards. However, in terms of traffic operation, it was known that the climbing lanes cause traffic congestion due to the increase of traffic volumes. In this regard, this study aims to establish traffic operational guidance as to how much effects temporary closure of climbing lanes can have on traffic improvement according to the volume-capacity ratio, grade, and composition of trucks. A test section of simulated climbing lane was selected in Nakdong JC bound for Masan(136.9K~133.3K, 3.6km, 3.7%) on Jungbunaeryuk expressway to conduct VISSIM analyses, microscopic traffic simulation based on such control variables as traffic volume(v/c), grade and the trucks ratio. As a result of the analyses, it has been found that v/c and the ratio of trucks are the key variables for efficient traffic management of climbing lanes in order to relieve traffic congestion via climbing lane. If ratio of trucks are more than 50% and when v/c would be 0.8, both climbing lane would be closed and non-operated regardless of grade and ratio of trucks when v/c is 1.0. With the increased traffic due to a five-day work week system, continued peak hours during the weekday, increased and various patterns of congestion on expressway, this study would be expected to contribute to facilitating researches on flexible operational standards for road facilities.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.116-125
• /
• 1998

도로공사로 인해 차선의 일부가 폐쇄된 경우에 이용하는 차선에 따라서 운전자의 통행패턴은 달라진다. 공사구간이 없는 경우 운전자의 차선변경은 제한적이나마 각 차선의 밀도에 의해서 좌우되는 것으로 나타났다. 또한 차선폐쇄지점 전방에서는 차선변경할 확률은 폐쇄지점까지의 남은 거리에 따라서 음지수함수를 따르는 것으로 확인되었다. 또한 논문에서 공사구간에서의 차선변경행태와 교통량, 밀도, 속도를 산정하였으며, 공사로 인한 차선별 지체시간을 산정하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.127-136
• /
• 2008

In these days, frequency of constructions on e freeway are increasing according as growing of the importance of e road maintenance and the road management. Work zone on the freeway where vehicles pass with high speed needs control method of lane closure and construction equipment. Because there are seldom researches in domestic study about reflecting characteristics of domestic road, sometimes we have applied for foreign cases to our traffic circumstance but it is not proper to apply for standard of other countries in our cases. foreign nation has different country square, condition of road, and level of people mind. Therefore, this study shows traffic accident characteristics in freeway work zones in Korea. At first, this study collected traffic accident data which include for 3 years $2003{\sim}2005$ in the whole freeway in Korea and then divided the data to five parts - level of the accident, type of the construction work, type of the accident, reason of the accident, according to geometric. According to comparing with non-work zones accident, this study found traffic accident characteristics in freeway work zones in Korea and suggested some alternative ideas for safety of work zones.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.263-277
• /
• 2016

Traffic safety in freeway work zones is of keen interest since both crash frequency and severity are much higher than those in general freeway sections. The lane closure in work zones results in greater work load of drivers due to compulsory lane changes and speed reduction. Therefore, traffic merging control is an effective countermeasure for enhancing work zone safety. This study proposed an integrated framework based on driving and traffic simulations to evaluate traffic merging control methods in terms of traffic safety. In addition to the conventional merging method using the taper, joint merge and chicane-type merge were evaluated by the proposed methodology. Chicane-type merge outperformed other methods under level of service (LOS) A and B. On the other hand, it was identified that joint merge showed the best safety performance under LOS C traffic conditions.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.3
• /
• pp.31-38
• /
• 2022

The purpose of this study is to rediscover the gestalt psychological value of the Landscaping structure and architectural landscape in the vulnerable village consulted by experts in 2021 year. For this study, nine villages called of Saethul Maul were surveyed, and two of them were analyzed for landscape composing of gestalt psychology. The two villages, Yulwon and Jeonchon, included the case where the landscaping structure of residence was viewed from outside the village and the case from within the village. Psychological distance of the villages is analyzed by D/H ratio for the scenery seen from lanes. There are three expected conclusions. First, in terms of gestalt psychology, the buildings mean a figure, and the rice field in front of the village, the mountains behind the village, and the lanes represent a landscape structure consisting a background(ground). It captures the unique landscape aesthetics of the vulnerable village. Second, the landscape seen in the village shows various differences in horizontal distance and vertical height of the lane, so even if the psychological distance gives a sense of closure, it gives a sense of rhythm and change. However, considering the psychological distance (D/H ratio) when the roads are expanded for the fire car, the village landscape can be re-formed by safety and function. Third, the architectural landscape of Yulwon village is characterized by the harmonious arrangement of traditional houses, Narack-Doiji (rice barn), and wooden building (agricultural barn) in the background of chestnut tree hill behind the village. It is necessary to reduce the use of industrial materials and restore the valuable architectural landscape of the vulnerable village.

• Structural Engineering and Mechanics
• /
• v.70 no.2
• /
• pp.169-178
• /
• 2019

The replacement of damaged components is an important task for long-span bridges. Conventional strategy for component replacement is to close the bridge to traffic, so that the influence of the surrounding environment is reduced to a minimum extent. However, complete traffic interruption would bring substantial economic losses and negative social influence nowadays. This paper investigates traffic control technologies without interruption for component replacement of long-span bridges. A numerical procedure of traffic control technologies is proposed incorporating traffic microsimulation and site-specific data, which is then implemented through a case study of cable replacement of a long-span cable-stayed bridge. Results indicate traffic load effects on the bridge are lower than the design values under current low daily traffic volume, and therefore cable replacement could be conducted without traffic control. However, considering a possible medium or high level of daily traffic volume, traffic load effects of girder bending moment and cable force nearest to the replaced cable become larger than the design level. This indicates a potential risk of failure, and traffic control should be implemented. Parametric studies show that speed control does not decrease but increase the load effects, and flow control using lane closure is not effectual. However, weight control and gap control are very effective to mitigate traffic load effects, and it is recommended to employ a weight control with gross vehicle weight no more than 65 t or/and a gap control with minimum vehicle gap no less than 40 m for the cable replacement of the case bridge.