• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.212-217
• /
• 2012

This study was carried out to investigate the effect of the hot forging ratio on the microstructure and mechanical properties of ultra high carbon steel. The microstructure of ultra high carbon steel with 1.5%wt.C consisted of a proeutectoid cementite network and acicular microstructure in pearlite matrix. With increasing hot forging ratio, the volume and thickness of the network and acicular proeutectoid cementite decreased. Lamella spacing and the thickness of eutectoid cementite decreased with increasing hot forging raito, and were broken up into particle shapes, which then became spheroidized. When the forging ratio was over 65%, the network and acicula shape of the as-cast state disappeared. With increasing hot forging ratio, hardness, tensile strength, elongation and impact value were not changed up to 50%, and then rapidly increased with the increase of the forging ratio.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.513-525
• /
• 1998

The spermatogenetic process in the edible giant snail is similar to those in the other snails, except for the axoneme formation process. In this study, the axoneme formation process in the giant snail was mainly examined by means of electron microscopy. The tail portion of a spermatozoon is about $160{\mu}m$ long, and extends straight to the rear, surrounded by two large and long mitochondria in spiral forms. A number of glycogen particles $(40\sim70nm)$ are found in the swollen matrix of the mitochodria. The axoneme which composes the tail of a spermatozoon is surrounded by $7\sim10$ lamella-form fibrous sheaths of about $0.2{\mu}m$ in thickness. Most of the mature spermatozoa are found to be clustered into a group of $5\sim7$ ea in syncytial bridges formed by cytoplasmic processes. Sertoli cells contain glycogen particles, endoplasmic reticulum, a lot of mitochondria, and lipids in their cytoplasm. They protrude their filiform pseudopodia and phagocytize abnormal spermatids or spermaozoa.

• Archives of Craniofacial Surgery
• /
• v.22 no.4
• /
• pp.204-208
• /
• 2021

Sebaceous carcinoma is a malignant neoplasm that usually arises in the sebaceous glands of the eyelids. Its pathogenesis is unknown; however, irradiation history, immunosuppression, and use of diuretics are known risk factors. The mainstay of treatment for sebaceous carcinoma of the eyelid is wide surgical resection with a safety margin of 5 to 6 mm, which often results in full-thickness defects. The reconstruction of a full-thickness defect of the eyelid should be approached using a three-lamella method: a mucosal component replacing the conjunctiva, a cartilage component for the tarsal plate, and a flap or skin graft for the skin of the eyelid. In this case, a full-thickness defect of the upper eyelid was reconstructed after tumor removal using a combination of a nasal septum chondromucosal composite graft and a forehead transposition flap, also known as a "Fricke flap." The flap was designed to include a line of the eyebrow on the lower margin of the flap to replace the eyelash removed during tumor excision. The wound healed completely, without any early or late complications, and the outcome was satisfactory.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.574-579
• /
• 2007

Porous $Al_2O_3$ ceramics were prepared by the gelcasting foams method (a slurry foaming process) with acrylamide monomer. The foaming and gelation behavior was investigated with the parameters such as the type and concentration of surfactant, solid loading of slurry, and the concentrations of initiator and catalyst. Density, porosity, microstructure, and strength of the green and sintered samples were characterized. Of the four kinds of surfactants tested, Triton X-114 showed the highest foaming ability for the solid loading of 55-30 vol%. The gelation condition giving the idle time off min was found to set the foamed structure without significant bubble enlargement and liquid lamella thinning. The green samples were fairly strong and machinable and showed maximum strength of 2.4 MPa in diametral compression. The sintered samples showed densities of 10-36% theoretical (i.e. porosity 90-64%) with a highly interconnected network of spherical pores with sizes ranging from 30 to $600{\mu}m$. The pore size and connectivity increased but the cell strut thickness decreased with decreasing the solid loading. Flexural strength of 37.8-1.7 MPa was obtained for the sintered samples.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.61-68
• /
• 2005

Dissimilar joining of Al 6013-T4 alloys and austenite stainless steel was carried out using friction stir welding technique. Microstructures near the weld zone and mechanical properties of the joint have been investigated. Microstructures in the stainless steel side were composed of the heat affected zone and the plastically deformed zone, while those in the Al alloy side were composed of the recrystallized zone including stainless steel particles, the thermo-mechanically affected zone and the heat affected zone. TEM micrographs revealed that the interface region was composed of the mixed layers of elongated stainless steel and ultra-fine grained Al alloy with lamella structure and intermetallic compound layer. Thickness of the intermetallic layer was approximately 300nm and was identified as the A14Fe with hexagonal close packed structure. Mechanical properties, such as tensile and fatigue strengths were lower than those of 6013 Al alloy base metal, because tool inserting location was deviated to Al alloy from the butt line, which resulted in the lack of the stirring.

• Composites Research
• /
• v.12 no.6
• /
• pp.53-64
• /
• 1999

Microstructural morphology and bending strengths of moulded composites of thermotropic liquid crystalline polymer(LCP) and polyamide 6 (PA6) have been studied as a function of epoxy fraction. Injection-moulding of a composite plaque at a temperature below the melting point of the LCP fibrils generated a multi-layered structure: the surface skin layer with thickness of $65\;-\;120{\mu\textrm{m}}$ exhibiting a transverse orientation; the sub-skin layer with an orientation in the flow direction; the core layer with arc-curved flow patterns. The plaques containing epoxy 4.8vol% exhibited superior bending strength and large fracture strain. With an increase of epoxy fraction equal to and beyond 4.8vol%, geometry of LCP domains was changed from fibrillar shape to lamella-like one, which caused a shear-mode fracture. An analysis of the bending strength of the composite plaques by using a symmetric layered model beam suggested that addition of epoxy component altered not only the microstructural geometry but also the elastic moduli and strengths of the respective layers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.396-400
• /
• 2003

A new synthesis process for nano laminating Ti$_3$SiC$_2$ has been developed using TiCx (x=0.67) and Si powder as starting materials by a reaction hot pressing. Bulk Ti$_3$SiC$_2$ was fabricated using a green body consisting of TiCx and Si by a hot pressing under the pressures of 25 MPa at 1420-1550 $^{\circ}C$ for 90 min. The synthesized Ti$_3$SiC$_2$ was consisting of only TiCx and Ti$_3$SiC$_2$. The relative density of sintered bulk Ti$_3$SiC$_2$ was increased as the hot pressing temperature was increased, which was mainly due to the increase in TiCx contents in synthesized Ti$_3$SiC$_2$. The synthesized Ti$_3$SiC$_2$ bulk was consisted of nano sized lamella structure of 20-100 nm in thickness. It was found that TiCx particles in Ti$_3$SiC$_2$ would increase the 3-point bending strength of synthesized Ti$_3$SiC$_2$ bulk. The maximum 3-P. bending strength of synthesized Ti$_3$SiC$_2$ bulk was more than 800 MPa. The Vickers hardness of synthesized Ti$_3$SiC$_2$bulk was as low as 5 Gpa, which was decreased with the indentation load. The quasi-plastic deformation behaviors were observed around indentation mark on Ti$_3$SiC$_2$.

• Journal of fish pathology
• /
• v.21 no.1
• /
• pp.67-79
• /
• 2008

This study was conducted to find out biological response of bivalves exposed to tributyltin chloride(TBTCl). The results of the study confirmed that TBTCl induce the reduction of oxygen consumption rateand histopathological feature in the gill structure of equilateral venus, Gomphina veneriformis. The experi-mental groups consisted of a control and 3 TBTCl exposure groups (0.4, 0.6 and 0.8 yg TBTCl L') and theexperimental period was 36 weeks. For histological analysis, gill tissues were fixed in Bouin's fluid andthen stained H-E stain, AB-PAS (PH 2.5) reaction and Masson's trichrome stain after having serially sec-tioned the tissue by paraffin method at thickness of 4-6 (an. The oxygen consumption rate was not signifi-cantly different between the control and exposure groups at 4 weeks, but in all exposure groups at 28 weeks,it was significantly different to the control. Gill of G. veneriformis had demibranch that attached two sheetsof lamellae and a lamella was composed of numerous filaments, numbering 25 on average. The frontal fila-ment zone had three types of cilia; frontal, latero-frontal and lateral depending on locations while the lateralcilia were the longest and largest in number. The mucous cells observed in filaments were more abundant in(542c) in AB-PAS (PH 2.5) reaction. Gill exposed to TBTCl was extended hemolymph sinus and increased hemocytes at 4 weeks, and then it showed increases of mucous cells and partially disappearance of frontalcilia. In the group of 0.8 yg TBTCl L' at 12 weeks, hypertrophy of frontal and latero-frontal epithelia wasobserved. Also it observed m decrease of mucous cell containing weekly acid mucosubstance and appearedpartially destruction muscle fiber bundle, In the groups of 0.4 and 0.6 ug TBTCl L' at 36 weeks, it appearedpartially modification of epithelia and in 0.8 us TBTCl L' group, observed filaments that come out chiti-nous rod from disappearance of frontal and latero-frontal epithelia.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.396-406
• /
• 2016

Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.147-159
• /
• 2002

Weathered bentonites occcur as surficial alterations of some domestic bentonite deposits in the Tertiary formations, with the thickness of less than about 50 cm, along naturally-formed weathering surface with slopping in gentle. 7 $\AA$-halloysite was found together with montmorillonite in the weathered bentonite. Compared to normal bentonite, the weathered one is generally more clay-rich and contains little amounts of original rock-forming minerals and residues. In the electron microscopy, fine-scale occurrence of the clay minerals tends to be somewhat discrete and segregated rather than closely associated. h curled margin of montmorillonite lamella is deformed to become obtuse in the weathered bentonite. Halloysite occurs as acicular to tubular crystals with the length of less than 2 $\mu$m and the width of about 0.3 $\mu$m, which commonly forms bundle-shaped aggregates. Electron microscopic observations on the fine-scale occurrence and texture of the wtathered bentonites indicate that the clay mineral transition from montmorillonite to halloysite has undergone without accompanying any intermediate phases of both clay minerals such as a mixed-layered type (M/H). The alteration reaction between these two clay minerals probably took place in the form of dissolution and precipitation mechanism in oxidation condition. An intense chemical leaching of SiO$_2$, Na, K and Ca might occur during the alteration reaction, forming a lot of dissolution cavity and residual concentration of A1$_2$O$_3$ and Fe, relatively. As the result of the chemical change, a fsvorable condition for halloysite formation seemed to be provided.