• Title/Summary/Keyword: ladder

Search Result 525, Processing Time 0.021 seconds

On the Occurrence of Defects by Vehicle Type According to the Fire-fighting Vehicle Detailed Inspection (소방차량 정밀점검 분석에 따른 차종별 결함 발생에 관한 연구)

  • Lee, Jang Won;Han, Yong-Taek
    • Journal of the Society of Disaster Information
    • /
    • v.17 no.1
    • /
    • pp.112-119
    • /
    • 2021
  • Purpose: This study is based on the detailed inspection data for the last 6 years of fire-fighting high ladder vehicles, fire-fighting inflected ladder vehicles, fire-fighting chemical vehicles and fire-fighting pump vehicles used in front-line fire departments. The purpose is to contribute to the technological development of fire-fighting vehicles by grasping the implementation status of each city and province, the rate of defects, and the occurrence of defects by year. Method: The implementation status by city and province, defect incidence rate, and defect occurrences by year were analyzed. Result: From 2012 to 2017, when the average of 230 or more overhaul vehicles was requested, the results of each city/province show slight fluctuations, but the number of defects gradually decreased due to the old fire-fighting vehicle replacement project and the response of fire vehicle manufacturers. Conclusion: In the case of fire-fighting ladders, the incidence rate of defects was found to be in the order of elevator device, electric device, ladder device, and pneumatic supply device. And in the case of the fire fighting ladder, it was confirmed that the incidence of defects appeared in the order of the refractive ladder, hydraulic cylinder, hydraulic oil, and pneumatic supply device. In the case of fire-fighting chemical vehicles, it was confirmed that defects occurred in the powder fire extinguishing device, fire pump, vacuum pump, and pneumatic supply device.

Comparison of High Frequency Detailed Generator Models for Partial Discharge Localization

  • Hassan Hosseini, S.M.;Hosseini Bafghi, S.M.
    • Journal of Electrical Engineering and Technology
    • /
    • v.10 no.4
    • /
    • pp.1752-1758
    • /
    • 2015
  • This paper presents partial discharge localization in stator winding of generators using multi-conductor transmission line (MTL) and RLC ladder network models. The high-voltage (HV) winding of a 6kV/250kW generator has been modeled by MATLAB software. The simulation results of the MTL and the RLC ladder network models have been evaluated with the measurements results in the frequency domain by applying of the Pearson’s correlation coefficients. Two PD generated calibrator signals in kHz and MHz frequency range were injected into different points of generator winding and the signals simulated/measured at the both ends of the winding. For partial discharge localization in stator winding of generators is necessary to calculate the frequency spectrum of the PD current signals and then estimate the poles of the system from the calculated frequency spectrum. Finally, the location of PD can be estimated. This theory applied for the above generator and the simulation/measured results show the good correlation for PD Location for RLC ladder network and MTL models in the frequency range of kHz (10kHz<f<1MHz) and MHz (1MHz<f<5MHz) respectively.

Comparison of Nursing Performance by Career Levels in a Nurse Career Ladder System (경력개발시스템 경력단계별 수술실 간호사 업무수행능력 비교)

  • Kim, Myoung-Sook;Park, Sung-Ae
    • The Journal of Korean Academic Society of Nursing Education
    • /
    • v.18 no.2
    • /
    • pp.284-292
    • /
    • 2012
  • Purpose: This study was to compare nursing performance by career levels in a career ladder system. Methods: This survey was conducted with 140 OR staff nurses. Ten unit managers evaluated their own staff with a performance evaluation tool composed of 51 items. Data were analyzed by frequency, t-test, one-way ANOVA, ${\chi}^2$-test, and ANCOVA. Results: In career level CN II, nursing performance showed differences by personal characteristics. However, there was no significant difference in level CN III. CN IIIs' nursing performance was significantly higher than CN IIs' in all domains. Nursing performance of CN III was significantly higher than CN IIs' in 5 to 10 years of clinical experience. Although there was no significant difference in other clinical experience groups, CN IIIs' scores were always higher than CN IIs' Conclusion: The results indicate that nursing performance improves with career ladder advancement. Organizations should encourage advancement to higher levels and eliminate obstacles.

Bio-Medical Data Transmission System using Multi-level Visible Light based on Resistor Ladder Circuit (저항 사다리 회로 기반의 다중레벨 가시광을 이용하는 의료 데이터 전송 시스템)

  • An, Jinyoung;Chung, Wan-Young
    • Journal of Sensor Science and Technology
    • /
    • v.25 no.2
    • /
    • pp.131-137
    • /
    • 2016
  • In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

The Fishways at Namdae-cheon and Osib-Cheon, and the Use of Migratory Fishes (양양 남대천과 영덕 오십천의 어동현황과 어류의 이용)

  • Hwang, Chong-Seo;Hur, Hyub
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.721-726
    • /
    • 1999
  • The fishways on Namdae-cheon and Osib-cheon and the use of migratory fishes were investifated from July 1998 through Jung 1999. There are three types of fishways on these rivers. Those are baffled fishways, fish ladder, and fish ladder with gabion. Namdae-cheon has 7 baffled fishways and 19 fish ladder, and Osib-cheon has only fish ladder with gaboin. On Namdae-cheon 1,195 fishes of 24 species were collected. Amog these fishes 241 fishes of 9 species were anadromous fishes occupying 38% in species and 19% in number. On Osib-cheon 1,015 fishes of 24 species were collected. Among these fishes 240 fishes of 5 species were anadromous fishes occupying 21% in species and 24% in number. On Namdae-cheon the species number and auundance decreased gradually upstream. The poor structure of fishways seems to have worked as an obstacle to the upstream migration of fishes on Namdae-cheon. On Osib-cheon all the observed fish species except three -spined stickleback(Gasterosteus aculeatus aculeatus) which stay and spawn around downstream of river could migrate upstream. The good structure of fishways on this river is thought to have helped upstream fish migration.

  • PDF

Digital Scan Converter Algorithm for Ultrsound Sector Scanner (초음파 섹터 스캐너를 위한 디지털 스캔 변환 기법)

  • 김근호;오정환
    • Journal of Biomedical Engineering Research
    • /
    • v.17 no.4
    • /
    • pp.469-478
    • /
    • 1996
  • In the conventional digital ultrasound scanner, the reflected signal is sampled either in polar coordinates of R-$\theta$ method, or in Cartesian coordinates of uniform ladder algorithm (ULA). The R-$\theta$ scan method necessitates a coordinate transform process which makes hardware complex in comparison with ULA scan mrthoA In spite of this complexity, R-$\theta$ method has a good resolution in ultrasonographic (US) image, since scan direction of the US imaging is a radial direction. In this paper, a new digital scan converter is proposed, which is named the radius uniform ladder algorithm (RULA). The RULA has the rome scan direction as the US scanning in the radial direction and as the display space in the $\theta$ direction. In tllis new approach, sampled points we uniformly distributed in each horizontal line i.n well as in each radial ray so that the data are displayed in the Cartesian coordinates by the 1-D interpolation process. The propped algorithm has an uniform resolution in the periphery and the center field in comparison with equi-angle ULA and equi-interval ULA. To extend the scan angle, concentric square raster sampling (CSRS) is adopted with reduction of discontinuities on the junctions between horizontal scan and vertical scan. The discontinuities are reduced by using the hmction filtering along the $\theta$ direction.

  • PDF

Tasks for Improving Safety Systems on Fall Accident Prevention of Portable Ladders (이동식 사다리 추락 재해 예방을 위한 안전 제도의 문제점과 개선 과제)

  • Hwang, Jong Moon;Shin, Sung Woo
    • Journal of the Korean Society of Safety
    • /
    • v.35 no.5
    • /
    • pp.86-94
    • /
    • 2020
  • Portable ladders are normally used both as an access tool for ascending and descending and as a platform for high place work. Though convenient, such usages make the portable ladders vulnerable to fall accidents. For this reason, many safety systems such as regulations and certifications are implemented to prevent fall accidents of portable ladders. However, nevertheless of those safety systems in Korea, annual death tolls of ladder fall accidents has remained high, and which suggests modification and improvement of the portable ladder related safety systems in Korea. The aim of this study is to propose directions for improving safety systems to effectively prevent fall accidents of portable ladders. To this end, comparative analysis on safety systems implemented in Korea and other countries including Japan, USA and UK are conducted to investigate the problems of Korean safety systems. Based on the analysis, limitations of Korean safety systems to prevent ladder fall accidents are discussed and tasks to overcome the limitations are proposed. Once implemented, the proposed tasks would contribute to prevent ladder fall accidents effectively.

Fault Analysis Attacks on Control Statement of RSA Exponentiation Algorithm (RSA 멱승 알고리즘의 제어문에 대한 오류 주입 공격)

  • Gil, Kwang-Eun;Baek, Yi-Roo;Kim, Hwan-Koo;Ha, Jae-Cheol
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.19 no.6
    • /
    • pp.63-70
    • /
    • 2009
  • Many research results show that RSA system mounted using conventional binary exponentiation algorithm is vulnerable to some physical attacks. Recently, Schmidt and Hurbst demonstrated experimentally that an attacker can exploit secret key using faulty signatures which are obtained by skipping the squaring operations. Based on similar assumption of Schmidt and Hurbst's fault attack, we proposed new fault analysis attacks which can be made by skipping the multiplication operations or computations in looping control statement. Furthermore, we applied our attack to Montgomery ladder exponentiation algorithm which was proposed to defeat simple power attack. As a result, our fault attack can extract secret key used in Montgomery ladder exponentiation.