• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.4
• /
• pp.53-61
• /
• 2005

A series of laboratory tests was carried out fur analyzing of seepage characteristics of two-layers embankment model which consists of gravel and earth fill layers. Gravel layers were built under the earth fill for a half and one-third width of earth fill of the model. Permeability of earth fill was ranged between $5.00\times10^{-5}\~3.00\times10^{-4}\;m/s$.. The tests were performed with hydraulic gradients(i), $0.10\~0.55$. From the test results, hydraulic head of earth fill with gravel layer was 1.6 times higher than that of earth fill without gravel layer. Seepage rate was increased up to $4\~22$ times and safety factor for piping was decreased to $13\~43\;\%$ comparing the earth fill with gravel layer to that without gravel layer. The gravel layer under the earth fill could, in general, give some serious seepage problems to seadike embankment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.301-312
• /
• 2017

The concept of deep borehole disposal (DBD) for high-level nuclear wastes has been around for about 40 years. Now, the Department of Energy (DOE) in the United States (U.S.) is re-examining this concept through recent studies at Sandia National Laboratory and a field test. With DBD, nuclear waste will be emplaced in boreholes at depths of 3 to 5 km in crystalline basement rocks. Thinking is that these settings will provide nearly intact rock and fluid density stratification, which together should act as a robust geologic barrier, requiring only minimal performance from the engineered components. The Nuclear Waste Technical Review Board (NWTRB) has raised concerns that the deep subsurface is more complicated, leading to science, engineering, and safety issues. However, given time and resources, DBD will evolve substantially in the ability to drill deep holes and make measurements there. A leap forward in technology for drilling could lead to other exciting geological applications. Possible innovations might include deep robotic mining, deep energy production, or crustal sequestration of $CO_2$, and new ideas for nuclear waste disposal. Novel technologies could be explored by Korean geologists through simple proof-of-concept experiments and technology demonstrations.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.187-196
• /
• 2017

To ensure hygienic safety of drinking water in a water storage tank, the concentrations of residual chlorine should be above a certain regulation level. In this study, we conducted model simulations to investigate the effects of temperature on residual chlorine in water storage tank conditions typically used in Seoul. For this, values of model parameters (decomposition rate constant, sorption coefficient, and evaporation mass transfer coefficient) were experimentally determined from laboratory experiments. The model simulations under continuous flow conditions showed that the residual chlorine concentrations were satisfied the water quality standard level (0.1 mg/L) at all the temperature conditions ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$). Meanwhile, when the tanks had a no flow condition (i.e., no tap-water influent due to a sudden shut-down), the concentrations became lower than the regulatory level after certain periods. The findings from this modeling works simulating Seoul's water storage tanks suggested disappearance rate of residual chlorine could be reduced through the tanks design optimization with maintenance of low water temperature, minimization of air flow and volume, suppression of dispersion and the use of wall materials with low sorption ability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1533-1556
• /
• 2017

The concept of trust in vehicular ad hoc networks (VANETs) is usually utilized to assess the trustworthiness of the received data as well as that of the sending entities. The quality of safety applications in VANETs largely depends on the trustworthiness of exchanged data. In this paper, we propose a self-organized distributed trust computing framework (DTCF) for VANETs to compute the trustworthiness of each vehicle, in order to filter out malicious nodes and recognize fully trusted nodes. The proposed framework is solely based on the investigation of the direct experience among vehicles without using any recommendation system. A tier-based dissemination technique for data messages is used to filter out non authentic messages and corresponding events before even going farther away from the source of the event. Extensive simulations are conducted using Omnet++/Sumo in order to investigate the efficiency of our framework and the consistency of the computed trust metrics in both urban and highway environments. Despite the high dynamics in such networks, our proposed DTCF is capable of detecting more than 85% of fully trusted vehicles, and filtering out virtually all malicious entities. The resulting average delay to detect malicious vehicles and fraudulent data is showed to be less than 1 second, and the computed trust metrics are shown to be highly consistent throughout the network.

• The Korean Journal of Community Living Science
• /
• v.26 no.4
• /
• pp.633-645
• /
• 2015

This study investigates the genotoxicity of crude antifungal compounds produced by Lactobacillus plantarum AF1 (L.plantarum AF1) and Lactobacillus plantarum HD1 (L. plantarum HD1) isolated from kimchi. The genetic toxicity of crude antifungal compounds was evaluated in bacterial reverse mutation in Salmonella and Escherichia spp., chromosome aberrations in Chinese hamster lung cells, and micronucleous formations in mice. In bacterial reversion assays with Salmonella Typhimurium TA98, TA100, TA1535, TA1537, and WP2uvrA, crude antifungal compounds did not increase the number of revertant colonies in both the absence and presence of the 59 metabolic activation system. In the chromosome aberration test with Chinese hamster lung cells, crude antifungal compounds showed no increase in the frequency of chromosome aberrations in the short-period test with/without the S9 mix or in the continuos test. In the in vivo mouse micronucleus assay, crude antifungal compounds showed no increase in the frequency of polychromatic erythrocytes with micronuclei. The results show that crude antifungal compounds produced by L. plantarum AF1 and L. plantarum HD1 did not induce any genotoxicity.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.190-197
• /
• 2016

Flash point is the one of the important properties for the safe handling of inflammable liquid solution. In this paper, flash points of binary liquid solutions, water+1-propanol and water+2-propanol, were been measured by using Seta flash closed cup aparatus. Flash point was estimated using regression analysis method. Flash points were also estimated by the method based on Raoul's law and the method optimizing the binary parameters of van Laar equation. Experimental results were compared with the calculated results. The regression analysis method is able to estimate the flash point fairly well for water+1-propanol and water+2-propanol mixture.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.166-173
• /
• 2014

Purpose: In this study, we focused on the image processing method to determine the external quality of Fuji apples by identifying surface defects such as scabs and bruises. Method: A CCD camera was used to capture filter images with 24 different wavelengths ranging between 530 nm and 1050 nm. Image subtraction and division operations were performed to distinguish the defect area from the normal areas including calyx, stem, and glaring on the apple surface image. All threshold values of the image were examined to reveal the defect area of pretreated filter images. Results: The developed operation methods were [image (720 nm) - image (900 nm)]/image (700 nm) for bruise detection and [image (740 nm) - image (900 nm)]/image (590 nm) for scab detection, which revealed 81% and 90% recognition ratios, respectively. Conclusions: Our results showed several optimal wavelengths and image processing methods to detect Fuji apple surface defects such as bruises and scabs.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.238-249
• /
• 2015

Purpose: Fruit and vegetable production is a fast-growing sector in East Africa, and it bears considerable local and international market potential. In an effort to analyze the challenges within this sector and suggest possible solutions, this study reviews the postharvest handling technologies commonly used with fruits and vegetables in East Africa. Methods: During the course of this study, small-scale farmers were identified as the most prominent producers of fruit and vegetable crops in the region. Results: We found that many of these small-scale farmers employed relative simple and inexpensive techniques in handling their limited volumes of produce. Several factors could be addressed to reduce postharvest losses, including weak policies, inferior infrastructure, and poor market strategies. However, the lack of basic knowledge (including demographic, scientific, and economic knowledge) among the stakeholders (e.g., researchers, farmers, governments, nongovernment organizations, and merchants) on how to develop, implement, use, and sustain the recommended handling technologies is probably the most problematic. Conclusions: We recommend that high priority be placed on closing the knowledge gap, which could enhance the efforts of all the stakeholders to address and reduce postharvest losses.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.318-326
• /
• 2013

Purpose: We developed a viability evaluation method for cucumber (Cucumis sativus) seed using hyperspectral reflectance imaging. Methods: Reflectance spectra of cucumber seeds in the 400 to 1000 nm range were collected from hyperspectral reflectance images obtained using blue, green, and red LED illumination. A partial least squares-discriminant analysis (PLS-DA) was developed to predict viable and non-viable seeds. Various ranges of spectra induced by four types of LEDs (Blue, Green, Red, and RGB) were investigated to develop the classification models. Results: PLS-DA models for spectra in the 600 to 700 nm range showed 98.5% discrimination accuracy for both viable and non-viable seeds. Using images based on the PLS-DA model, the discrimination accuracy for viable and non-viable seeds was 100% and 99%, respectively Conclusions: Hyperspectral reflectance images made using LED light can be used to select high quality cucumber seeds.

• Smart Structures and Systems
• /
• v.1 no.4
• /
• pp.355-368
• /
• 2005

Large and complex structures are being built now-a-days and, they are required to be functional even under extreme loading and environmental conditions. In order to meet the safety and maintenance demands, there is a need to build sensors integrated structural system, which can sense and provide necessary information about the structural response to complex loading and environment. Sophisticated tools have been developed for the design and construction of civil engineering structures. However, very little has been accomplished in the area of monitoring and rehabilitation. The employment of appropriate sensor is therefore crucial, and efforts must be directed towards non-destructive testing techniques that remain functional throughout the life of the structure. Fiber optic sensors are emerging as a superior non-destructive tool for evaluating the health of civil engineering structures. Flexibility, small in size and corrosion resistance of optical fibers allow them to be directly embedded in concrete structures. The inherent advantages of fiber optic sensors over conventional sensors include high resolution, ability to work in difficult environment, immunity from electromagnetic interference, large band width of signal, low noise and high sensitivity. This paper brings out the potential and current status of technology of fiber optic sensors for civil engineering applications. The importance of employing fiber optic sensors for health monitoring of civil engineering structures has been highlighted. Details of laboratory studies carried out on fiber optic strain sensors to assess their suitability for civil engineering applications are also covered.