• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.837-846
• /
• 2020

In present study, we investigated the antidiabetic effect of Momordica charantia(as well known "bitter melon"). This study was conducted to determine antidiabetic mechanism of Bitter Melon Extract (BME). We measured blood glucose, insulin, glucagon level in a Sprague-Dawley rat model of high-fat diet/streptozotocin(HFD/STZ)-induced diabetes. Five experimental groups were used: normal, HFD/STZ, BME 62.5 mg/kg HFD/STZ, BME 125 mg/kg HFD/STZ and BME 250 mg/kg HFD/STZ. BME was orally administered to the rats every other day for 9 weeks. Results showed that fasting blood glucose levels were significantly lower in the BME 125 mg/kg(150.17 ± 20.22 mg/dL) and 250 mg/kg(124.17 ± 22.17 mg/dL) groups than in the vehicle group(188.83 ± 26.63 mg/dL)(p<0.05). In addition, glucagon levels were lower in the three BME treatment groups than in the vehicle group(p<0.05). Oral glucose tolerance tests revealed that the BME 250 mg/kg group had significantly(p<0.05) reduced 120-minute blood glucose levels and areas under the curve. Our results suggest that BME induces antidiabetic effects via the reduction of glucagon and blood glucose levels.

• YAKHAK HOEJI
• /
• v.54 no.4
• /
• pp.295-299
• /
• 2010

The aim of this study was to develop and validate for determination of alibendol in human plasma by HPLC method. After precipitation of 500 ${\mu}l$ plasma samples by 50% methanol 50 ${\mu}l$ and 60% perchloric acid 30 ${\mu}l$ and the supernatant 50 ${\mu}l$ was injected into HPLC. The assay was performed isocratically using 10 mM potassium phosphate (pH 3.0) and acetonitrile (80 : 20, v/v) as mobile phase. The $C_{18}$ column (particle size $3.5{\mu}m$, $4.6{\times}50$ mm, Zorbax Eclipse) was used as a solid phase. The mobile phase was delivered at a flow-rate of 1.7 ml/min, detection was by ultraviolet absorption at 232 nm and concentrations were calculated on the basis of peak areas. In these conditions, alibendol can be separated from ethylparaben, the internal standard, and endogenous substances. The retention times of alibendol and ethylparaben were just about 2.6 and 3.5 minutes, respectively. This rapid HPLC method was validated by examining the precision and accuracy for inter- and intra-day analysis. The standard curve was linear ($R^2$=1.0000) over the concentration range of 0.05~20 ${\mu}g$/ml. The inter-day relative standard deviation (R.S.D.) and accuracy were 0.2~12.2% and 94.4~101.2% (82.7% at the lower limit of quatitation). The intra-day R.S.D. and accuracy were 0.1~11.8% and 98.8~102.5%, respectively. The method was successfully applied to the determination of alibendol in plasma for a pharmacokinetic study.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.1
• /
• pp.92-100
• /
• 2017

Due to the presence of ferrite phase in the finished welds, austenitic stainless steel welds (ASSWs) are considered susceptible to the thermal aging embrittlement during long-term service in light water reactor environment. In this study, the thermal aging embrittlement of typical ASSWs, E308 and ER316L welds, were evaluated after the long-term exposure up to 20,000 h at $400^{\circ}C$, which is considered as an accelerated thermal aging condition. After thermal aging, the decrease of tensile ductility and fracture toughness was observed. The microstructure observation with high resolution transmission electron microscopy revealed that spinodal decomposition in ferrite phase of both E308 and ER316L welds would be the main cause of the degradation of mechanical properties. Also, it was shown that the difference of thermal ageing embrittlement between ER316L and E308 welds was significant, such that the reduction of fracture resistance for ER316L weld was much larger than that of E308 weld.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2760-2764
• /
• 2013

Geniposide is a biologically active ingredient of gardenia fruit. A liquid chromatography-tandem mass spectrometric method was developed and validated for the determination of geniposide in rat plasma. The plasma samples were pretreated by solid-phase extraction and introduced into a BDS Hypersil $C_{18}$ column ($50{\times}2.1mm$, $5{\mu}m$) for chromatographic separation. The mobile phase consisted of 0.1% formic acid and 0.1% formic acid in acetonitrile, and gradient elution was performed at a flow rate of 0.25 mL/min. For mass spectrometric detection, multiple reaction monitoring was performed via an electrospray ionization source in positive mode. The calibration curve for geniposide was linear ($r^2=0.997$) in the concentration range of $0.005-1{\mu}g/mL$. The intra- and inter-day accuracies and precisions fulfilled the required criteria (${\pm}15%$). The developed method was subsequently used for pharmacokinetic analysis of geniposide after oral administration to rats at a dose of 50 mg/kg. The mean maximum plasma concentration of geniposide was $0.68{\pm}0.29{\mu}g/mL$ at $0.44{\pm}0.13h$, and the mean area under the plasma concentration versus time curve was $1.46{\mu}g{\cdot}h/mL$.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.294-301
• /
• 2012

In order to use in the classification of minor crop for the mutual application of safe use guideline, it was compared a green onion with a scallion on the residue property of insecticide bifenthrin and chlorfenapyr. After pesticides were applied 2 times with 1 week interval in that day of harvest, 3 days, 7 days, 10 days and 14 days before harvest, vegetables were harvested, and the residue of pesticides was investigated. Base on the residue in that day of harvest, the deposit of spray solution in vegetables was calculated. The deposit of spray solution of bifenthrin was 123.0 mL/kg in a green onion, and 74 mL/kg in a scallion. In case of chlorfenapyr, it was calculated 126.5 mL/kg in a green onion, and 70.0 mL/kg in a scallion. When the amount of the deposit of both pesticides was compared a green onion with a scallion, it was higher in a green onion. On the other hand, it was estimated the predicted dissipation curve of pesticides in a green onion and a scallion during cultivation. The dissipation curve of bifenthrin was y = 1.0334 $e^{-0.0602x}$ ($R^2$= 0.8606) in a green onion, and y = 0.7693 $e^{-0.1823x}$ ($R^2$= 0.9756) in a scallion. In case of chlorfenapyr, it was y = 2.2603 $e^{-0.0519x}$ ($R^2$= 0.9043) in a green onion, and y = 1.2940 $e^{-0.1051x}$ ($R^2$ = 0.9782) in a scallion. The half-life of bifenthrin was 11.51 days in a green onion, and 3.80 days in a scallion, respectively. Also, it was estimated half-life in chlorfenapyr, it was 13.35 days in a green onion, and 6.59 days in a scallion, respectively. The half-life of both pesticides in a green onion was longer than in a scallion. When both vegetables were compared with the residue property, the deposit of spray solution and half-life of dissipation in a green onion were more than those in a scallion.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.9-18
• /
• 1993

Sugar spheres loaded with melatonin (MT) were coated with $Aquacoat^{\circledR}$ to control the release rate of MT over 8 hours. A zero-order release pattern over 8 hours was obtained with 20% coating on 8-10 mesh beads in USP basket dissolution studies. MT in 20% coated beads was quite stable at room temperature with less than 5% MT degraded during 6 months' storage. Dissolution profiles were also unchanged after 6 months. An oral preparation containing MT-loaded uncoated beads for immediate release and 20% coated beads with $Aquacoat^{\circledR}$ for controlled release over 8 hours was evaluated in six human subjects. When total 0.5 mg MT as low dose (immediate release portion of MT, 0.1 mg) was administered to four subjects, average peak plasma MT concentration was reached at about 600 pg/ml and maintained at about 10 pg/ml over 8 hours. Plasma MT concentration-time profiles were similar in shape to computer-simulated profiles. However, maximal plasma MT concentrations were three times greater compared to computer simulated curve. These results suggest that MT dose, ratio of immediate and controlled release MT, and pharmacokinetic parameters selected are adjusted to mimic endogenous MT concentration-time curve. In another study, 0.2 mg MT having 10% of immediate release portion and 80% controlled release portion produced plasma MT concentration-time curve which is more similar to endogenous profiles. A low bioavailability (<20%) may result from extensive first pass metabolism and remaining amounts of MT from controlled beads. A good correlation between plasma MT concentration and urinary excretion rate of 6-sulphatoxymelatonin (6-STMT), a major metabolite of MT was observed. As plasma MT concentration increased, urinary excretion rate of 6-STMT increased concomitantly. The linear relation between plasma MT and urinary excretion rate of 6-STMT was statistically significant. This result suggests that urinary 6-STMT may be used as an index of circadian rhythms of MT in humans.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.1
• /
• pp.78-82
• /
• 2009

We describe a catch experiment and the size selectivity of gill nets for male Japanese sandfish (Arctoscopus japonicus) caught near Gosung, Korea. The experiment, which was conducted between October and December 2007, examined six different mesh sizes: 36.4, 39.4, 45.5, 51.5, 53.0, and 57.6 mm. The catch was mostly Japanese sandfish (91.3%) and some others (8.7%). More male Japanese sandfish were caught with smaller mesh sizes and more females with larger mesh sizes. Relationships between the weight and fork length of the male and female Japanese sandfish were obtained. The relationship between the catch (Y) and mesh size of the gill net (X) was $Y=0.1773X^3-5.3753X^2+40.042X+26.846$ ($R^2=0.99$). The selection curve for male Japanese sandfish caught in the experiment was fit, via Kitahara's method, to a polynomial equation, which was $s(R={\exp}\{(-2.1391\;R^3+24.294\;R^2-88.289\;R+105.5)-5.180\}$, where R=l/m, and l and m are the fork length and mesh size, respectively.

• Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.152-162
• /
• 2024

Background: Plant species of the alpine treeline ecotone are highly sensitive to climate change and may adjust their population dynamics, and functional traits in response to changing climate. This study examined regeneration patterns and leaf traits variations in an important treeline ecotone element Rhododendron campanulatum along the elevation gradient in western Nepal to assess its potential adaptive responses to climate change. The distribution range of R. campanulatum (3,400-3,800 m above sea level [a.s.l.]) was divided into five horizontal bands, each with a 100 m elevational range. Eight plots (10 m × 10 m) were sampled in each band, resulting into a total of 40 plots. In each plot, all R. campanulatum individuals and co-occurring tree species were counted. From each elevation, R. campanulatum leaf samples were collected to determine leaf dimensions, leaf density, specific leaf area (SLA), and stomatal density (SD). Results: The density-diameter curve indicated that R. campanulatum was regenerating well, with enhanced regeneration at higher elevation (3,800 m a.s.l.) than at lower. Tree canopy cover appeared to be the major determinant of R. campanulatum regeneration, as indicated by a higher number of seedlings in treeless stands. With increasing elevation, the leaf length, width, SLA, and stomata length decreased but leaf thickness and SD increased. Conclusions: Overall, a higher regeneration and lower SLA with the high SD in the leaves at the upper limit of the species distribution suggested that R. campanulatum is well adapted at its upper distribution range with the possibility of upslope range shift as temperature increases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1207-1212
• /
• 2015

A vibro ripper utilizes high-frequency vibration for rock fragmentation. This concept is different from those used by other existing breakers. The gearbox-shank welded joint of a vibro ripper is a very important part. Because it delivers the vibromotive force to the tooth, it is important to predict its soundness. This study was conducted to predict the fatigue life under welding conditions. The shank materials were Hardox-Hituf and AR400, and the filler metals were CSF-71T and CSF-81T. Fatigue tests were conducted under each set of conditions. P-S-N curves are presented based on the statistical testing method recommended by JSME-S002, and a comparison is made of the results under each set of conditions. The life was estimated using a P-S-N curve.