• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.92-97
• /
• 2006

The objective of this study was to investigate the quality characteristics of canned deer meat produce with prepared BBQ sauce (T1) and Jangjorim sauce (T2). The mixture were stuffed into cylindrical can (about 150 g each) and thermally processed at $121^{\circ}C$ for 30 min, the sample were stored at $30{\pm}1^{\circ}C$ for 60 days and analyzed with an interval of 30 days. pH, salinity, saccarinity of T1 were significantly lower (p<0.05) than that of T2. TBARS and VBN of T1 were significantly higher (p<0.05) than that of T2. In the result of sensory evaluation, all product obtained good score (p>6.0) in overall acceptability during whole storage at $30{\pm}1^{\circ}C$. Theses result should be useful in developing guidelines for canned deer meat preparation by consumer and processors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• The Journal of the Korean bone and joint tumor society
• /
• v.6 no.2
• /
• pp.106-111
• /
• 2000

Focal fibrocartilaginous dysplasia(FFCD) is an uncommon, benign condition associated with unilateral tibia vara among young children. FFCD has a typical plain radiographic finding, which has a concave radiolucent defect in the metadiaphyseal junction of medial aspect of the proximal tibia. The varus deformity occurs at the site of the lesion. Spontaneous remodeling and resolution of bony defect may be expected, but the corrective osteotomy may also be needed in some cases. The authors described a case of unilateral tibia vara caused by FFCD, diagnosed by excisional biopsy and treated with dome-shaped proximal tibial osteotomy and bone graft.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.292-297
• /
• 2015

In this paper, we reported the bypass unit for ship area networks in order to detour the communication failure regions and poor communication links. The device was composed of three parts of circuits for power cut-off, protection, and coupling transformer. Since the coupling transformer exerts a dominant influence on the performance of the by-pass unit, we have tried to find the optimal magnetic core materials and its dimensions. The prototype was passed through the performance test of insertion loss, temperature, and vibration characteristics. The insertion loss was around -2 dB in the range of 90 kHz ~ 30 MHz and the average communication speed was 59.2 Mbps in the laboratory. A pilot communication test using the developed tool was conducted in the training ship of the Korea Maritime and Ocean University. As a results of experiment, we showed that the wired communication among the heterogeneous-links in the ship area networks are possible by the bypass unit and also a high speed communication services are available in ~ Mbps by using a power-line.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.923-928
• /
• 2014

Communication underwater is severely limited when compared to communications in air because water is essentially opaque to electromagnetic radiation except in visible range. Acoustic systems are capable of long range communication, but offer limited data rates and significant latency due to the speed of sound in water. On the other hand, optical wireless communication has been proposed as one of the best alternatives to meet the requirements of the underwater observation and subsea monitoring systems. It will help In this study, we are developing an underwater optical communication system that integrates with a depot ship floating on the water. An interface between LED lighting communication system and Bluetooth module is presented to support the underwater-to-air communications. Error free image and text transmission at 3 m of water were achieved at bit rates of 230.4 kbps. This development effort will enhance infrastructure to efficiently interconnect between underwater wireless systems and command ship networks for underwater monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.425-430
• /
• 2013

Robust and high speed underwater communication is severely limited when compared to communications in terrestial. In free space, RF communication operates over long distances at high data rates. However, the obstacle in seawater is the severe attenuation due to the conducting nature. Acoustic modems are capable of long range communication up to several tens of kilometers, but it has low data-rate, high power consumption and low propagation speed. An alternative means of underwater communication is based on optics, wherein high data rates are possible. In this paper, the characteristics of underwater channel in the range of visible wavelength is investigated. And the possibility of optical wireless communication in underwater is also described. The LED-based transceiver and CMOS sensor module are integrated in the system, and the performance of image transmission was demonstrated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.336-341
• /
• 2016

This paper presents an implementation of a communication network in wind turbines, which exploits the power-line communication system (PLC). We used an inductive coupling unit and a multi-interface device to connect a data-communication terminal to the power line, to ensure that stable communication was possible at various electric current and voltage values of the generator. The results of the operation tests conducted on an operational wind turbine showed that the implemented PLC demonstrated a transmission rate of at least 43 Mbps with a 100% success rate. Moreover, a real-time image was transmitted. Thus, the system could be a useful alternative for implementing a communication network in wind turbines that does not require additional channels. Since the presented system is easy to implement, and can support various interfaces for data communication, it will be quite useful when a real-time monitoring system is launched in wind turbines.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.5
• /
• pp.421-425
• /
• 2008

Exogenous lipoid pneumonia (ELP) is a chronic inflammatory reaction of the lungs resulting from the aspiration of vegetable, animal or mineral oils. Squalene, is a derivative of shark liver oil that is taken as a traditional remedy in some Asian countries, and is used widely also in cosmetics. Similar to the symptoms in most cases of oil aspiration, the symptoms of squalene-induced lipoid pneumonia are either absent or nonspecific. Hence, the disease is generally detected incidentally. Although many cases with predisposing factors have been reported, ELP with achalasia is quite rare. We report a 47-year old woman with achalasia who developed ELP after ingesting squalene. The patient was treated successfully by supportive care and surgical treatment of the achalasia.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.63-67
• /
• 2015

White light-emitting diode (WLED) is growing interest in using both illumination and communications. This paper reports visible light communication (VLC) composed of a super bright white light-emitting diode, low cost commercial photo-diode and a Fresnel lens. LED driver is consisted of the power MOSFET and MOSFET driver that switches the LED on and off. The modulation bandwidth of the LED used was determined to be 8 MHz. However, it was possible to communicate up to 1 Mbps under illumination of 500 lx because of the weak signal power and a low spectral sensitivity of the SHF213 as a PIN photodiode. In order to enhance the system bandwidth, the LED light was focused on the PIN photodiode by use of the Fresnel lens. As a result of that, visible light link was operated up to modulation bandwidth of the LED. The signal to noise ratio can be improved by 40 dB using an optical concentration at the receiver.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.953-958
• /
• 2015

Raspberry Pi is a credit card-sized computer with support for a large number of input and output peripherals. This makes it the perfect platform for interaction with many different devices and for usage in a wide range of applications. When combined with Wi-Fi, it can communicate remotely, therefore increasing its suitability for the construction of wireless sensor nodes. In addition, data processing and decision-making can be based on artificial intelligence, what is performed in developed testbed on the example of monitoring and determining the confidence of fire. In this paper, we demonstrated the usage of Raspberry Pi as a sensor web node for fire-safety monitoring in a building. When the UV-flame sensors detect a flame as thin as that of a candle, the Raspberry Pi sends a push-message to notify the assigned smartphone of the on-site situation through the GCM server. A mobile app was developed to provide a real-time video streaming service in order to determine a false alarm. If an emergency occurs, one can immediately call for help.