• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.89-100
• /
• 2022

The development of the Construction Production Rates System for appropriate construction cost calculation has recently come to the fore as a means of invigorating OSC based PC structure which currently needs institutional frameworks. PC structure based construction expenses consist of the factory-built assembly, transportation and on-site installation. Recently, in the field of transportation and site installation, research on product structure development is being conducted, such as presenting the standard product calculation system reflecting the results of field survey for each subsidiary materials (Lee et al., 2021). On the other hand, there is no ongoing research on estimating construction expenses of Factory-built assembly. This study suggests Construction Production Rates System which can be used for PC subsidiary materials based Factory-built assembly cost estimations. For the research, work types for the construction procedures have been categorized, and the standard input manpower suitable for the corresponding work characteristics has been derived from analyzing the associated Construction Standard Production Rates for each work type. Also, as the research referred PC subsidiary materials (such as columns, beams, walls, and slab, as well as on-site installation) and the standard number of workforce based on work types, one can calculate direct labor cost, using what the research shows. In addition, it suggests that the size of individual subsidiary materials be the extra cost factor, by using the characteristics that productivity changes depending on the size(m³) of subsidiary materials. It is expected that the research can contribute to objectively verifying factory-built assembly cost through of PC structure, which currently relies on estimates.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.56-60
• /
• 2005

We studied fire properties of MOF(Metering Out Fit) insulation cover and field condition of 22.9kV power receiving system. $49.5\%$ of formal equipments were installed indoors, whereas $40.8\%$ of informal equipments were installed as H-type. Insulation treatment was not done at a $22.4\%$ ratio of main line($27.7\%$ of transformer, $70.2\%$ of COS, $10.4\%$ of MOF). Fire pattern analysis showed that the fire started at the secondary part of OC wire. In the result of DTA(Differential Thermal Analysis), normal cover showed exothermic reactions at $310^{\circ}C,\;399^{\circ}C\;and\;510^{\circ}C$ (endothermic reactions at $382^{\circ}C$). Whereas damaged cover showed exothermic reactions at $412^{\circ}C$(endothermic reactions at $389^{\circ}C$). In the result of TGA(Thermo Gravimetric Analysis), the thermal weight change of normal cover was similar compared to damaged cover. In the result of FT-IR analysis, normal cover showed absorption peaks at $3,024cm^{-l},\;2,921cm^{-l},\;1,600cm^{-1},\;1,492cm^{-1},\;1,451cm^{-1},\;1,154cm^{-l},\;1,027cm^{-1},\;906cm^{-1}$. Whereas, in case of tracked cover, the absorption peaks that were shown in normal cover disappeared and different absorption peak was shown at $966cm^{-1}$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1555-1560
• /
• 2000

Recently, optical pickup actuators have been designed to have structures that extruded lens to decrease their height, because they are used in very thin drive for notebook computers. However, because of discordant and undesirable of forces that are supposed to happen in this design feature, subsidiary resonance such as rolling and pitching mode exert bad influence on actuator. In this paper, we presented force constituents to clarify the cause of subsidiary resonance and proposed new finite element analysis method to calculate force precisely, and performed frequency response analysis to evaluate characteristics of actuators. As a result, we could find out design parameters to diminish the influence of subsidiary resonance. Sample actuators designed with appropriate parameters were fabricated and put to practical tests. Comparing analysis with experimental results, we verified the accuracy of the analysis and the effectiveness of the method presented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.264-267
• /
• 2006

This paper describes the accident analysis by modeling the current transformer mounting in meaium voltage metal-clad switchgear(MCSG). In analyzing the accident the reconstruction at the current transformer mounting(VCB connecting guide) has to be taken into account. The accident was modelled as a 3-phase ground fault mounting between the end plate of a high voltage lines and the safety shutter at the current transformer mounting of the VCB inside the metal clad switchgear. Since the outside maintenance of the metal clad switchgear is restricted by the enclosed compartments, its circumference has to be kept clean. Through the reconstruction results, it was confirmed that the fault of the enclosed switchboard could be reduced when the shutter made of Fe material was changed into an insulation.

• Journal of Plant Biology
• /
• v.30 no.1
• /
• pp.43-57
• /
• 1987

The epidermal structure and stomatal types in vegetative and reproductive organs of three species of Bryophyllum(B. crenatum, B. diagremontion, B. tubiflorum) were described. The epidermal cells were polygonal, isodiametric, and rectangular in the leaves and stems, and elongated cells in the stamens, styles, and ovaries. These cells were commonly thick, and arched or sinuous in the leaves, epiphylous bunds, petals and ovaries. They were straight in the stems, petioles, pedicels, and peduncles. In both vegetative and reproductive organs, the subsidiary cell walls were commonly thin and mostly arched in all the organs. The great majority of the mature stomata in all the organs were helicocytic type with a helix of four to six subsidiary cells. The mature stomata varied from organ to organ with regard to the number and arangement of subsidiary cells. The ontogenetic type of stomata in all the organs was mostly helico-eumesogenous type. This type was subdivided into three subtypes such as parahelico-eumesogenous, anomohelico-eumesogenous, and diahelico-eumesogenous stomata on the basis of the division angle fo the guard mother cell. Sometimes, the anisoeumesogenous type was found in various organs. This type was subdivided into three subtypes such as paraniso-eumesogenous, anomoaniso-eumesogenous, and dianisoeummesogenous stomata. The tetra-eumesogenous and duplotetra-eumesogenous types were rarely found; the former in the leaf of B. crenatum and the latter in the leaf of B. diagremontiana. Anomometric patterns in the mesogenous categorry of stomatal types was observed in a few organs of all the materials. A new stomatal type with tetra-eumesogenous stoma within a girdle of three subsidiary cells fo aniso-eumesogenous in the leaf of B. diagremontiana was firstly observed in the vascular plants. This stoma was termed the cotetra-aniso-eumesogenous type. Anormal stomata such as aborted stomata, single guard cells, stoma with a constricted part in the middle of large guard cells, and arrested stomata were found in the various organs of all the materials.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.63-68
• /
• 2005

In this study, the arc dispersion properties were analyzed according to switching of high sensitive type Residual Current Protective Device(RCD) contacts. Arc dispersion and ignition process was taken by high speed imaging system(HSIS). In this experiment, electric lamps(60 W) and heaters(950 W) were connected in parallel as loads. In case of normal RCD, it took about 2.3(ms) from the generation of arc to the extinction of uc. When arc was dispersed in normal RCD, it did not ignite cotton. Whereas, in case of RCD deteriorated by NaCl solution, the range of arc dispersion was wider and the arc lasted for 3.3[ms] more compared to normal RCD. And the arc ignited cotton. In order to prevent accidents caused by RCD, we should be careful of environmental factors, such as dust and humidity, and the parts of RCD should be used as incombustible materials.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.148-157
• /
• 2017

This study has studied the phenomenon exclusive to the activity of skin scuba among marine sports in Busan region, and such empirical studies are for the development of skin scuba, and even of the entire marine sports, and in order to achieve such objective, the study method centered around qualitative study method of in-depth interview, participatory observation, and documentation study, the results of which are as follows. First is the advantage of the local environment as an open-water location. This study area has beaches of pebbles, and the underwater is also comprised of pebbles up to a certain distance, securing a superior underwater visibility compared to the sand of other Busan regions, and such local environment is thought to be an advantage of skin scuba activity. Second is the satisfaction of accessibility. This study area had an advantage in participant accessibility, which is thought to act as a good strength for the marine sports development of this area in the future. Third is the satisfaction of education. The club instructors of this study area had various marine sports-related licenses such as skin scuba, along with marine lifeguard trainer qualifications to prepare against safety accidents, which are also thought to have positive influences on the education satisfaction for beginners. Fourth is the inconvenient subsidiary facility. This study area has great natural environment for open waters, but the subsidiary facilities of the club for skin scuba activity was found to be very inconvenient by this study, and for the future development of skin scuba, the improvement of subsidiary facilities should be considered. Fifth is the inconvenient parking facilities. The participants in this study area agreed upon the inconvenience of the parking issue alongside the subsidiary facilities. There are always parking issues near the coasts of Busan region, and in order to resolve such issues, active assistance from the City of Busan and each local government, and if such methods are well proposed, the conflict between the marine sports participants and local residents shall be resolved, it would play a great role in the development of marine sports.

• International Commerce and Information Review
• /
• v.16 no.2
• /
• pp.221-249
• /
• 2014

This study analyzed the sufficient conditions for Korean firm's foreign subsidiaries in order to evolve into a center of excellence for knowledge creation and diffusion. In this respect, the purpose of this study is to develop a new framework based on literatures related to subsidiary knowledge creation and a center of excellence. Specifically, we created seven decisive factors for subsidiary knowledge creation: two general factors, two strategic important factors, and three excellent factors. Each factor can be a necessary condition or sufficient condition according to research purpose. For example, the decentralized organizational structure belonging to general factors become a sufficient factor for facilitating subsidiary's knowledge creation but it become a necessary condition for a center of excellence because all subsidiaries with decentralized organizational structure cannot be strategically important subsidiaries. By using seven decisive factors, this study examines the determinants' validity theoretically and practically.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.18-23
• /
• 2005

There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.

• Journal of Nutrition and Health
• /
• v.10 no.4
• /
• pp.19-23
• /
• 1977

It is said that a mode of dietary behavior changes together with socioeconomic and cultural transformation. Formation of dietary habit of pre-school children influences upon direction of this changes, specially. So, this study was planned to analyst the dietary pattern of pre-school children. A survey was carried out for 3 days of 28 pre-school children with a mean age of 4 years and 3 months. Each child's matter wrote dietary pattern and kinds of food as staple, subsidiary and snack. The results showed that; (1) the average meal frequency a day was 3.1 and interval between meal was 5.1 hours (for breakfast to lunch & lunch to supper) and 12.6 hours (for supper to breakfast), (2) there were 27 different kinds of foods as staple and cereal products consumed the most among those, and 82 different kinds of foods as subsidiary and KIMCHI products were eaten the most rating, (3) the average snack frequency a day was 5.0. There were 76 different kinds of foods as snack, among them cold drink was the best. The present observation suggested that pre-school children had a tendency to take meat regularly, but snack very irregularly, and kinds of foods taken as staple, subsidiary and snack didn't keep the nutritional balance. Parent's concern about dietary behavior of their children is demanded more than ever.