• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.39-44
• /
• 2015

The VHTR (Very High Temperature gas-cooled nuclear Reactor) has been considered as a major heat source and the most safe generation IV type reactor for mass hydrogen production to prepare for the hydrogen economy era. The VHTR satisfies goals for the GIF (Generation IV International Forum) policy such as sustainablility, economics, reliability and proliferation resistance and physical protection, and safety. As a part of a VHTR economic analysis, we have studied the VHTR construction cost and operation and maintenance cost. However, it is somewhat difficult to expect the ripple effect on the whole industry due to the lack of information about Inter-industries relationship. In many case, the ripple effect are based on experts' knowledge or uncertain qualitative assumptions. As a result, we propose quantitative analysis techniques for ripple effects such as the production inducement effect, added value inducement effect, and employment inducement effect for VHTR 600MWt${\times}$4 modules construction and operation ripple effect based on NOAK (Nth Of A Kind). Because inducement effect values have been published annually, we predict inducement effect's relation function and estimated values including production inducement effect value, added value inducement effect value, and employment inducement effect value using time series and estimated values are verified with published inducement effects' value. This paper presents a new method for the ripple effect and preliminary ripple effect consequence using a time series analysis and inter-industry table. This ripple effect analysis techniques can be applied to effect expectation analysis as well as other type reactor's ripple effect analysis including VHTR for process heat.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.63-77
• /
• 2009

The decrease in the farming rates of agricultural produce importing countries has led to concerns over stable food supply and food safety and this situation demands a change in awareness on agricultural problems arising from the depletion of natural resources and environmental destruction. To preserve agriculture, importing countries are emphasizing the various roles of agriculture in order to revive its multi-functional aspects. It is obvious that differentiated strategies are needed to create values from agricultural production, and a liberal arts education can play an important role in making these strategies. However, training programs for future agricultural CEOs of the Korea National Agricultural College(KNAC) attaches too much importance on production skill and management rather than focusing on a liberal arts education. On the other hand, Poolmoo Ecological Agriculture Course carried out by Poolmoo Agriculture Technical High School located in Hongseong-Gun, Chungnam Province (which puts a high value on ecological fanning) gives more weight on a liberal arts education, taking up more than 50% of the curriculum. Also, the National Farmers Academy in Japan which reformed its whole system in 2008, has started various liberal arts educational programs. The Academy fosters creative agricultural management, attractive rural development enhancing a comfortable rural life and educates on the future of Japanese food and international environment. It is expected that the ecological and cultural roles of farming will grow in the future. So, what the KNAC needs is to increase its liberal arts educational programs and various cultural experiences in its educational curriculum to promote agricultural marketing with cultural knowledge and sensitivity.

• Journal of Service Research and Studies
• /
• v.10 no.4
• /
• pp.89-100
• /
• 2020

The smart factory is an important axis of the 4th industrial revolution. Smart factory is a system that induces the maximum efficiency and effectiveness of production using the IoT and intelligent sensing systems. The product lifecycle management technique is a method that can actively reflect the consumer's requirements in the smart factory and manage the entire process from the consumer to the post management. There have been many studies on product lifecycle management, but studies on how to organize product lifecycle management knowledge domains in preparation for the era of the 4th industrial revolution were insufficient. This study analyzed the opinions of a group of experts preparing for the 4th industrial revolution in terms of product lifecycle management. The impact of the 4th industrial revolution on the detailed knowledge areas of product lifecycle management was investigated. The changes in product lifecycle management were summarized using a qualitative data analysis technique for a group of experts. Based on the opinions of experts, the product lifecycle management, which consists of a total of 30 detailed knowledge areas, was prepared to supplement or prepare for the 4th industrial revolution. This study investigates changes in product lifecycle management in preparation for the 4th industrial revolution in the knowledge domain of the existing defined product life cycle management. In future research, it is necessary to redefine the knowledge domain of product life cycle management suitable for the era of the 4th industrial revolution and investigate the perception of experts. Considering the social culture and technological change factors of the 4th industrial revolution, the scope and scope of product life cycle management can be newly defined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.276-279
• /
• 2022

The 4th industrial revolution refers to the transition to a knowledge society in which the production speed of knowledge is fast and the proportion of the knowledge industry is greatly increased. The reorganization of the industrial structure and the change of occupations and jobs due to new technologies are bringing about changes in education, and the development of digital technology has made education that is borderless, individual and dynamic, becoming the new standard of education. With these changes, interest in nano-degrees on new technologies or micro-degrees focused on core courses rather than regular course degrees is increasing. As a representative example, Udacity in the United States has opened and operated online nanodegree courses related to jobs, and collaborates with major companies to develop and educate core training courses necessary for companies, thereby efficiently supporting companies in securing talent. With the revitalization of online vocational and job training, an environment has been prepared in which individuals can set goals for vocational competency development and continue their portfolio-based sustainable learning. However, for effective vocational education, automated and personalized educational content design should be preceded. To this end, in this paper, we propose a personalized career and course map recommendation system in the era of online learning

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.55-68
• /
• 2020

Because of the intensified environmental problems such as climate change and resource depletion, sewage treatment technology focused on energy management has recently attracted attention. The conversion of primary sludge from the primary sedimentation tank and excessive sludge from the secondary sedimentation tank into biogas is the key to energy-positive sewage treatment. In particular, the primary sedimentation tanks recover enriched biodegradable organic matter and anaerobic digestion process produces methane from the organic wastes for energy production. Such technologies for minimizing oxygen demand are leading the innovation regarding sewage treatment plants. However, sewage treatment facilities in Korea lack core technology and operational know-how. Actually, the energy potential of sewage is higher than sewage treatment energy consumption in the sewage treatment, but current processes are not adequately efficient in energy recovery. To improve this, it is possible to apply chemically enhanced primary treatment (CEPT), high-rate activated sludge (HRAS), and anaerobic membrane bioreactor (AnMBR) to the primary sedimentation tank. To maximize the methane production of sewage treatment plants, organic wastes such as food waste and livestock manure can be digested. Additionally, mechanical pretreatment, thermal hydrolysis, and chemical pretreatment would enhance the methane conversion of organic waste. Power generation systems based on internal combustion engines are susceptible to heat source losses, requiring breakthrough energy conversion systems such as fuel cells. To realize the energy positive sewage treatment plant, primary organic matter recovery from sewage, biogas pretreatment, and co-digestion should be optimized in the energy management system based on the knowledge-based operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.787-790
• /
• 2003

A rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of $E{\times}B$ field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1996

With the starting of Uruguay Round(UR) and World Trade Organization(WTO), the direction of trade in world market has been setting up with the beginning of an opening age. However, world nations has been expressed a deep concern on the marketing and the circulations of unsafe foods, especially in the international trade of food products. Therefore, administration of most countries are taking a firm step on the safety of imported food products. The implementation of hazard analysis critical control point(HACCP) system in food industry is strongly appeared on the world stage at this point. Major international organizations, such as WHO, WTO, and EC have been recognized the importance of HACCP and already documented on their future plan for standardization of food safety in the international trade of food products by means of the this system. Several advanced countries have already developed HACCP system for the food industry and have been producing food products under this system. Now they have proposed rulemakings on a mandatory HACCP program in the production of domestic and imported food products. However, with the lacking of knowledge and information on the HACCP, there has been no actions for applying this system in the food industry of Korea. It is a very clear fact that Korean dairy and food industry will be faced on serious problems in exporting food products without applying HACCP system in the very near future. The objective of this article is to introduce the world trend. necessity, and application of HACCP system in food and dairy industry. Also a HACCP system developed by one dairy processing plant in Europe will be demonstrated as a moldel system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.407-410
• /
• 1998

Configuration is a set of building block processes, a series of selection and combining parts or components which composes a whole thing. A whole thing could be such a configurable object as manufacturing product, network system, financial portfolio, system development plan, project team, etc. Configuration problem could happen during any phase of product life cycle: design, production, sales, installation, and maintenance. Configuration has long been one of cost and time consuming work, because only high salaried technical experts on product and components can do configuration. Rework for error adjustments of configurations at later process causes far much cost and time, so accurate configuration is required. Under the on-line electronic commerce environment, configuration problem solving becomes more important, because component-based sales should be done automatically on the merchant web site. Automated product search, order placement, order fulfillment and payment make that manual configuration is no longer feasible. Automated configuration means that all the constraints among components should be checked and confirmed by configuration engine automatically. In addition, technical constraints and customer preferences like price range and a specific function required should be considered. This paper gives an brief overview of configuration problems: characteristics, representation paradigms, and solving algorithms and introduce CRSP(Constraint and Rule Satisfaction Problem) method. CRSP method adopts both constraint and rule for configuration domain knowledge representation. A survey and analysis on web sites adopting configuration functions are provided. Future directions of configuration for EC is discussed in the three aspects: methodology itself, companies adopting configuration function, and electronic commerce industry.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.639-643
• /
• 2003

The emphasis is put on the detailed knowledge on manoeuvring characteristic for the safe navigation while avoiding terrible collision between ships and on the guideline to the design and operation of the ship-waterway system The numerical simulation of manoeuvring motion was carried out parametrically for different ship types, ship-velocity ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference (hereafter, $U_2$/$U_1$ ) between two ships were considered as 0.6, 1.2, 1.5. From the inspection of this investigation, it indicates the following result. Considering the interaction force only as parameter, the lateral distance between ships is necessarily required for the ship-velocity ratio of 1.2, compared to the cases of 0.6 and 1.5 regardless of the ship types. Furthermore, regardless of the ship-velocity ratio, an overtaking and overtaken vessel can be manoeuvred safely without deviating from the original course under the following conditions: the lateral distance between two vessels is approximately kept at 0.5 times of ship-length and 5 through 10. degrees of range in maximum rudder angle. The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.141-146
• /
• 1998

Recently, the computer vision such as part measurement, and product inspection is very popular to achieve the factory automation since the labor cost is dramatically increasing. In this paper, the diameter and the length of rope are measured by CCD camera which is orthogonally mounted on the ceiling. Two parameters which are the diameter and the length of rope are used to measure the weight of rope. If the weight of rope is reached to predetermined weight, the information is transmitted to PLC(programmable logic control) to cut the rope on the wheel. The cutting machine cuts the rope according to the information obtained from the CCD camera. To measure the diameter and length of rope on real time, the searching space for image segmentation is restricted the predetermined area according to the camera calibration position. Finally, to estimate the weight of rope, the knowledge base system which depends on the diameter, the length of rope, and weight relation between these information are constructed according to diameters of rope. This method contributes to achieve the factory automation, and reduce the production cost since the operators are unnecessary to measure the weight of rope by try-and-error method.