• Korean Journal of Applied Biomechanics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2018

Objective: The purpose of this study is to investigate the differences in biomechanical variables of golf driving motion according to gender. Method: A total of 21 healthy golfers (11 men and 10 women) who have more than 5 years of professional experience and have been registered in the Korea Golf Association was recruited. A 250-Hz 8-camera motion capture system (MX-T20, Vicon, LA, USA) was used to capture the motion trajectories of a total of 42 reflective markers attached to the golfer's body and club. Moreover, two 1,000-Hz AMTI force plates (AMTI OR6-7-400, AMTI, MA, USA) were used to measure the ground reaction force. The mean and standard deviation for each parameter were then calculated for both groups of 21 subjects. SPSS Windows version 23.0 was used for statistical analysis. The independent t-test was used to determine the differences between groups. An alpha level of .05 was utilized in all tests. Results: There were differences in joint angles according to gender during golf driver swing. Men showed a statistically significantly higher peak joint angle and maximum range of angle in sagittal and frontal axis of the pelvis, hip, and knee. Moreover, women's swing of the pelvis and hips was found to have a pattern using the peak joint angle and range of angle in the vertical axis of the pelvis and hip. There were the differences in peak joint moment according to gender during golf driver swing. Men used higher joint moment in the downswing phase than women in the extensor, abductor, and external rotator muscles of the right hip; flexor and adductor muscles of left hip joint; and flexor and extensor muscles of the right knee. Conclusion: This result reveals that male golfers conducted driver swing using stronger force of the lower body and ground reaction force based on strength of hip and thigh than female golfers.

• PNF and Movement
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2015

Purpose: Abdominal breathing exercises are recommended to activate the breathing muscles and the pelvic floor muscles, as well as to increase postural alignment during exhalation. The purpose of this study was to clarify the effect of improving abdominal muscle strength on menstrual pain in women in their twenties using abdominal breathing exercises. Method: In this study, 32 female university students were included as the subjects. The subjects were divided into two groups based on the area of menstrual pain: lumbar pain (n=16) and lower abdomen pain (n=16). The abdominal breathing positions were divided into two positions, which included a hook lying position and hip and knee flexions at $90^{\circ}$ in the supine position. Exercises were used to strengthen the abdominal muscles during exhalation. Four sets of the exercises were completed three times a week over the course of eight weeks. The degree of pain was measured using the Numeric Rating Scale (NRS). Muscle thickness was measured using an ultrasound. Result: The thickness of the transverse abdominis (TrA) and internal oblique (IO) increased in the lower abdomen pain group. However, thickness of the external oblique (EO) did not increased following abdominal breathing. No significant difference in posture was identified in the lower abdomen group. TrA thickness increased significantly in the lumbar pain group. However, thickness did not increase significantly in the lumbar pain group. In addition, the lumbar pain group experienced no significant effects on posture. IO thickness increased following hip and knee flexions at $90^{\circ}$ in the lumbar pain group. Menstrual pain decreased following intervention in both groups. There was no significant difference in the degree of pain reduction between both groups. Conclusion: As examples of alternative medicine, abdominal breathing exercises may be effective in decreasing menstrual pain.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.215-226
• /
• 2021

Background: Robot-assisted gait training (RAGT) is an effective method for walking rehabilitation. Additionally, the body weight support (BWS) system reduces muscle fatigue while walking. However, no previous studies have investigated the effects of RAGT with BWS on isokinetic strength of quadriceps and hamstring muscles. Objects: The purpose of this study was to investigate the effects of torque, work, and power on the quadriceps and hamstring muscles during RAGT, using the BWS of three conditions in healthy subjects. The three different BWS conditions were BWS 50%, BWS 20%, and full weight bearing (FWB). Methods: Eleven healthy subjects (7 males and 4 females) participated in this study. The Walkbot_S was used to cause fatigue of the quadriceps and hamstring muscles and the Biodex Systems 4 Pro was used to measure the isokinetic torque, work, and power of them. After RAGT trials of each of the three conditions, the subjects performed isokinetic concentric knee flexion and extension, five at an angular velocity of 60°/s and fifteen at an angular velocity of 180°/s. One-way repeated analysis of variance was used to determine significant differences in all the variables. The least significant difference test was used for post-hoc analysis. Results: On both sides, there were significant differences in peak torque (PT) of knee extension and flexion between the three BWS conditions at an angular velocity of 60°/s and 180°/s conditions. A post-hoc comparison revealed that the PT in the BWS 50% was significantly greater than in the BWS 20% and the FWB and the PT in the BWS 20% was significantly greater than in the FWB. Conclusion: The results of this study suggest that the lower BWS during RAGT seems to lower the isokinetic torque, work, and power of the quadriceps and hamstring muscles because of the muscle fatigue increase.

• Journal of the Korean Burn Society
• /
• v.23 no.2
• /
• pp.31-36
• /
• 2020

Purpose: Scar contracture influence the outcome of burn patients significantly. This study aims to investigate the feasibility of robot-assisted training for the lower extremity rehabilitation of burn patients. Methods: This pilot study was conducted on 7 burn patients for 8 weeks between January 2019 and November 2019. Two of 7 patients withdrew from this study because one had skin abrasion on the legs which thigh fastening devices were applied on and the other was not participate in the assessment at 4 weeks after training. Final 5 patients received gait training with SUBAR^® and numeric rating scale (NRS), 6-minutes walking test, and range of motion in flexion and extension of knee and ankle joint were evaluated before training, 4 weeks and 12 weeks after training. Results: The subjects had a mean age of 51.8±98 years, mean total burn surface area of 30.8±13.7%, mean duration from injury to 1^st assessment of 102.8±39.3 days. Anyone of 5 patients did not have musculoskeletal or cardiovascular side effects such as increased or decreased blood pressure or dizziness. The significant improvement in NRS, gait speed, and range of motion in knee extension and ankle plantarflexion after robotic training (all P<0.05). Conclusion: Robot-assisted training could be feasible for the rehabilitation of burn patients and it could improve muscle strength and range of motion in lower extremities, and gait function.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.121-134
• /
• 2006

The purpose of this study was to analyze the effect of different types of rehabilitation training program on the kinetic and kinematic parameters during sit-to-stand movement(STS) in chronic stroke patients. Two groups of hemiparetic patients, experimental and control, participated in the study. The experimental group participated in a 10-week training program (three sessions/wk, $1{\sim}1.5\;hr/session$) consisting of a warm-up, aerobic exercises, lower extremity strengthening. and a cool-down. The control group participated in an aerobic exercise. Three dimensional kinematic analysis and force platform; were used to analyze the duration of STS, lower extremity angle, and weight bearing ability. The experimental group which had more strength of lower extremity displayed decrease in duration of STS. However, the control group showed increases in duration during sit-to-stand movement. The control group flexed their trunk more than the group did Therefore, it took more time to extend their trunk during STS. The duration in sit-to-stand was affected by the strength of lower extremity and the angle of trunk movement. The angles of ankle and knee joint had an influenced on duration of STS. The post experimental group performed with their feet near the front leg of the chair during sit-to-stand, therefore the duration was decreased. The repetitive sit-to-stand movements as a resistance exercise was effective to hemiparetic patients in learning mechanism of sit-to-stand. The control group showed decreased differences in the vertical ground reaction forces between paretic and non-paretic limbs. Their training program included strengthening exercise that may help improving weight bearing ability. The control group showed increases in the center of pressure in the anteroposterior and mediolateral displacement. This means that the stability of movement was low in the control group. Their training program which combined aerobic and strengthening exercises that are more effective to improve the stability of movement.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.389-399
• /
• 2019

The purpose of this study was to investigate the effects of muscle asymmetry of knee joint among elite cyclists on anaerobic pedaling power related capacity. In another word, based on isokinetic strength of Non-Dominant, ND and Dominant, D, side, high, moderate and low ratio of ND to D were classified as High Symmetry Group, Moderate Symmetry Group and Asymmetry Group, respectively. Analysis of muscle asymmetry of extensor's ND and D side might not lead to any difference between the three groups. Based on muscle strength analysis of the flexor's ND and D, there was statistical difference between the groups in ND flexor and in the muscle balance index of the flexor muscle. This result also leads to significant difference in pedaling power functionality, but this effects might not lead to any negative pedaling power. Therefore, among even cyclists who may show almost the same recruitment pattern of ND and D side during pedaling stroke muscle asymmetry could exist but this phenomena might not negatively contribute to the pedaling capacity.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.45-52
• /
• 2024

Objective: The purpose of this study was to measure the morphological characteristics of the foot and biomechanical variables of the lower extremity joints during vertical jump and investigate the relationship between foot morphology and biomechanics of vertical jump. Method: 24 men in their 20s (age: 22.42 ± 1.41 yrs, height: 173.37 ± 4.61 cm, weight: 72.02 ± 6.21 kg, foot length: 251.70 ± 8.68 mm) participated in the study. Morphological characteristics of the foot included the length of the first toe, the length of the second toe, and the horizontal length from the center of ankle joint to the achilles tendon (Plantar Flexion Moment Arm [PFMA]). Biomechanical variables were measured for plantar flexor strength of the ankle joint and peak angular velocity, moment, and power of the lower extremity joint during vertical jump. Results: There was a significant correlation between the length of the first toe and plantar flexion strength at 30°/s [r=.440, p=.016], the angular velocity of the metatarsophalangeal [MTP] joint [r=-.369, p=.038] while significant correlations between PFMA and the angular velocities of the knee joint [r=.369, p=.038] and ankle joint [r=.420, p=.021] were found. There were also significant correlations between the length of the first toe and the maximum moment of the hip joint [r=.379, p=.034], and the length of the second toe and the power of the hip joint [r=-.391, p=.029]. Finally, significant correlations between PFMA and the power of the ankle joint [r=.424, p=.019] and MTP joint [r=.367, p=.039] were found. Conclusion: Based on the results of this study, the length of the toe and PFMA would be related to the function of the lower extremity joint. Therefore, this should be considered when designing the functional structure of a shoe. Furthermore, this relationship can be applied to intensive training for the plantar flexors and toe flexors to improve power in athletic performance.

• Journal of the Korean Magnetics Society
• /
• v.25 no.4
• /
• pp.123-128
• /
• 2015

The iron is an element having a high yield strength, mechanical hardness, good electrical conductivity, and also it has been used in various fields because of ease machining. In bridges have been used tendon made of a steel wire for large loads and light weight. Tension measurement of tendon employed in PreStressed Concrete (PSC) bridge is very important for the bridge safety check. NDT (Non-Destructive Testing) is essential for the safety check, however, magnetic NDT is difficult to apply due to the non-linear magnetization curve and hysteresis loop in the magnetic properties. In this work, for basic study of magnetic NDT application, we have constructed a B-H loop measuring system for 7-strand tendon of which diameter is 15.5 mm, and which can apply tensile stress up to 2.0 GPa. We have measured hysteresis loops of two kinds of tendons under different tensile stress. Amplitude permeability and maximum magnetic induction near knee show the most sensitive and high linearity depends on tensile stress. Relative amplitude permeability was decreased from 500 to 200 and maximum magnetic flux density changed 0.6 T.

• 한국체육학회지인문사회과학편
• /
• v.58 no.2
• /
• pp.405-416
• /
• 2019

This study aimed to identify the efficiency of short track-related sports injury prevention program consisted of muscle strength and neuromuscular training on non-contact injury incidence and characteristics in knee and ankle joints and low back for elite short track speed skaters. Twenty-five short track athletes who belonged to G-City Team were participated in this study from Nov. 2017 to Jul. 2018. Information on their sports injuries occurred were collected and injury prevention program was applied in their warm-up every training sessions and competition. Also their symptom-level of knee and ankle joint and low back were measured by using OSTRC overuse injury questionnaire and Cumberland ankle instability(CAIT). The injury incidence rate after application of prevention program was 2.79 injuries/1,000 hour exposures(HEs), which was lower than before (3.04 injuries/1,000HEs). The OSTRC score (30.89±28.34 and 23.84±23.61, respectively) in knee and low back after application of prevention program were lower than before (58.47±26.77 and 52.36±21.55, respectively), and the CAIT score (13.47±6.07) in ankle joint after application of program was higher than before (16.26±7.28), which means that their symptom-level was alleviated with sports injury prevention program. In conclusion, the sports injury prevention program designed for short track's motion and characteristic can have positive influences on the occurrence of non-contact injury for short track speed skaters.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.197-203
• /
• 2017

Objective: The purpose of this study was to determine how exercise intensity affects muscle activity and kinematic variables during squat. Method: Fifteen trainers with >5 years of experience were recruited. For the electromyography (EMG) measurements, four surface electrodes were attached to both sides of the lower extremity to monitor the rectus femoris (RF) and biceps femoris. Three digital camcorders were used to obtain three-dimensional kinematics of the body. Each subject performed a squat in different conditions (40% one-repetition maximum [40%1RM], 60%1RM, and 80%1RM). For each trial being analyzed, three critical instants and two phases were identified from the video recording. For each dependent variable, one-way analysis of variance with repeated measures was used to determine whether there were significant differences among the three different conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results: The results showed that the average integrated EMG values of the RF were significantly greater in 80%1RM than in 40%1RM during the extension phase. The temporal parameter was significantly longer in 80%1RM than in 40%1RM and 60%1RM during the extension phase. The joint angle of the knee was significantly greater in 80%1RM than in 40%1RM at flexion. The range of motion of the knee was significantly less in 80%1RM than in 40%1RM and 60%1RM during the flexion phase and the extension phase. The angular velocity was significantly less in 80%1RM than in 40%1RM and 60%1RM during the extension phase. Conclusion: Generally, the increase of muscle strength decreases the pace of motion based on the relation between the strength and speed of muscle. In this study, we also found that the increase of exercise intensity may contribute to the increase of the muscle activity of the RF and the running time in the extension phase during squat motion. We observed that increased exercise intensity may hinder the regulation of the range of motion and joint angle. It is suitable to perform consistent movements while controlling the proper range of motion to maximize the benefit of resistance training.