• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.116-126
• /
• 2017

This study applied a segmented hard shell design on knee protectors for children with the objective of increasing mobility. The prototype of the hard shell that does not correspond to movement of the body among components of the knee protector was developed. Surface modeling was conducted based on 3D knee data to enhance comfort through optimized fit on the knee joint where the hard shell would be worn. For this, previous studies on changes in skin near the knee joint during knee flexion were reviewed to establish basic segmental lines. The basic design included six segments, and the number of segments was used as the design variable by increasing or decreasing it to 0, 3, 6, 9, and 14 segments. A prototype was produced from 3D printing with TPU material, worn for wearing assessment. Results revealed fewer numbers of segments resulting in less fit with the body, while actual appearance was stable. Meanwhile, the number of proper segments improved better fit with the body during movement. The wearing assessment revealed the amount of gap reflects change in skin length depending on movement. Assessment results demonstrated basic segment design, S6 with 6 segments, had the best design and most optimized fit. Findings in this study can provide key data for designing knee protection products for children.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.2
• /
• pp.1025-1030
• /
• 2016

The purpose of this study was to investigate the effects of combined wedge on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion of foot for genu varus among adult men during gait. This study was carried out with 10 adult men for genu varus in a motion analysis laboratory in J university. The subjects of the experiment were measured above 5cm width between the knees on contact of both medial malleolus of ankle while standing. The width of their knees in neutral position was measured without the inversion or eversion of the subtalar joint by the investigator. The subjects of the experiment were ten who were conducted randomly for standard insole, insole with $10^{\circ}$ lateral on rear foot wedge, insole at $10^{\circ}$lateral on rear foot and $5^{\circ}$ medial on fore foot wedge. Before and after intervention, changes on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion were measured. In order to compare analyses among groups; repeated one-way ANOVA and $Scheff{\acute{e}}$ post hoc test were used. As a result, combined wedge group was significantly decreased compared to control wedge group in terms of knee varus angle in mid-stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of ankle eversion moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of knee adduction moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge in terms of center of pressure excursion in whole stance(p<.05). The results of this study suggest that combined wedge for genu varus decreased ankle eversion moment and knee adduction moment upon center of pressure excursion. We hypothesize that combined wedge may also be effective in the protection excessive ankle pronation.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.177-184
• /
• 2002

The knee joint is composed of 3 skeletons that is the femoral bone, the tibial bone, and the patella bone. The tibiofemoral pint and patellofemoral pint act with the meniscus, so these function that is maintain the stabilities by the surrounding soft tissue is complex. The protection mechanism(muscle tension) of the surrounding muscles for the joint disease(Arthritis) limits consistently the motion of the pint to decrease the internal pressure of the joint, and these muscle tension acts with abnormal function for the surrounding tissue and the joint, sometimes the contracture is developed, if the joint with disease is not recovery or treated within early time. So we worked out efficient orthopedic local taping for the patient who is complained of the knee pint pain using the literature investigation about the anatomical structure and the biomechanics of the knee pint for the muscle and the pint problem esp, the rotation of the tibia, the dislocation of the patella, and the motion of the meniscus that is developed due to tension of surrounding muscles of the knee pint. And application of the pint mobilization, the stretching, and the muscle strengthening exercise for the pint will become successful treatment for the joint disease.

• Physical Therapy Korea
• /
• v.16 no.1
• /
• pp.25-33
• /
• 2009

In dancers, intact muscular coordination is a well balanced antagonist, which could be a decisive factor in protection against injury as dancers often have hypermobile joints and their ankle joints often bear their full body weight in extreme positions. The purposes of this study were to identify the isokinetic strength to the knee and ankle and the isometric strength of the trunk in female collegiate dancers and controls. Furthermore, the study aimed to investigate the peak torque ratio of knee extension to flexion, ankle plantarflexion (PF) to dorsiflexion (DF), and dominant legs to nondominant. Twenty-one female collegiate dancers (20.0 years of age) and twenty-one female collegiate students (19.3 years of age) performed isokinetic maximum efforts of the knee extensors and flexors at $60^{\circ}/sec$ and $120^{\circ}/sec$, the ankle plantarflexors and dorsiflexors at $30^{\circ}/sec$ and $120^{\circ}/sec$ and isometric maximum efforts of the lumbar extensors at $0^{\circ}$, $12^{\circ}$, $24^{\circ}$, $36^{\circ}$, $48^{\circ}$, $60^{\circ}$, and $72^{\circ}$. The results were as follows: The isokinetic peak torque of the knee extensors and the ratio of knee extensors to flexors of dancers were significantly higher than those of controls (p<.01). However, the isometric peak torque of the back extensors (p<.01) and isokinetic peak torque of the ankle plantarflexors and dorsiflexors (p<.05) of dancers were significantly lower than those of controls. Further studies are needed to identify the difference in proprioception of the joints between dancers and controls.

• Research in Community and Public Health Nursing
• /
• v.28 no.1
• /
• pp.55-68
• /
• 2017

Purpose: The purpose of this study is to develop and evaluate a joint health self-management program for knee osteoarthritis elders in communities. Methods: This program was developed based on the IMB (information-motivationbehavioral skills) model. The program methods include education, setting and achieving goals, sharing experiences, telephone counseling, and self-monitoring. The topics of the program include joint assessment, exercise, massage, joint protection, medication, depression management, diet, and healthcare approach. The research was conducted following the principles of the nonequivalent control group pretest-posttest design. Participants were 26 subjects in the experimental group, and 27 subjects in the control group. The experimental group participated in the self-management program, and the control group received general education. Results: Both post-test scores of personal motivation, social motivation, behavior skill, self-management behavior, joint pain, joint stiffness, physical function disability, right knee extension, left knee extension, and depression were significantly different between the experimental group and the control group. Conclusion: The results of the study can be used to develop and standardize a systematic joint health self-management program. Further research is highly recommended to develop a strategy to continuously facilitate self-management of osteoarthritis patients' procedures.

• Herbal Formula Science
• /
• v.29 no.3
• /
• pp.127-145
• /
• 2021

Objectives : The purpose of this study was to evaluate the effects of Daeganghwal-tang on knee cartilage in monosodium iodoacetate(MIA)-induced osteoarthritis rats. Methods : Forty SD rats were randomly divided into five groups(n=8/group): normal group was SD rats group injected with normal saline at left knee joint and administrated orally distilled water, control group was MIA-induced osteoarthritis SD rats group administrated orally distilled water, Indomethacin group was MIA-induced osteoarthritis SD rats group administrated orally indomethacin 2 mg/kg, DGHT(L) group was MIA-induced osteoarthritis SD rats group administrated orally 1280 mg/kg of Daeganghwal-tang, and DGHT(H) group was MIA-induced osteoarthritis SD rats group administrated orally 2560 mg/kg of Daeganghwal-tang. After orally administration of drugs for 4 weeks, gross appearance and histological analysis were used to evaluate the degree of knee cartilage damage. In addition, pro-inflammatory cytokines, bone degrade factor and bone defence factors were analyzed to investigate the anti-inflammatory and cartilage protection effects of Daeganghwal-tang. Also, hematological test, biochemical test, and liver and kidney tissue were analyzed to determine the safety of Daeganghwal-tang. Results : Daeganghwal-tang inhibited the damage of the knee cartilage, and significantly prevented the reduction in cartilage thickness. In addition, the pro-inflammatory cytokines and the bone degrade factor significantly decreased, and the bone defence factors significantly increased. In the safety assessment of Daeganghwal-tang, there were no significant differences among the experimental groups and no abnormal findings were observed. Conclusions : Daeganghwal-tang has anti-inflammatory effect, inhibits cartilage damage, and protects cartilage in MIA-induced osteoarthritis rats.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.259-267
• /
• 2001

The purpose of this study is to find out the actual condition of demining suit wearing for developing a new demining suit. The existing clothes fro detecting or demining work are lack of security, activity, and comfort. Especially, the lack of protection on the limbs and the head, and the lack of protection of its own fabrics themselves are problems in security. Developing new demining suit should consider security, activity, and facility for putting on and off the clothes with comfort. And first of all, protection from the fragments should be considered. For the improvement of the activity, flexibility, lightness, and simplicity with suitable size with minimum bulk should be considered. In adjustment, the facility is more important than the strength and the newly developed material for protection need lightness, too.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Archives of Plastic Surgery
• /
• v.50 no.6
• /
• pp.593-600
• /
• 2023

Background Soft tissue reconstruction around the knee area is still an open question, particularly in persistent infections and multiple reoperations scenario. Flap coverage should guarantee jointmobility and protection, even when foreign materials are implanted. The chimeric harvesting of the musculocutaneous gastrocnemius flap, based on the sural artery perforators, can extend its applicability in soft tissue reconstruction of the upper leg, overcoming the drawbacks of the alternative pedicled flaps. Methods A multicenter retrospective study was conducted enrolling patients who underwent to a pedicled, chimeric gastrocnemius musculocutaneous-medial sural artery perforator (GM-MSAP) or lateral sural artery perforator (GM-LSAP) flap for knee coverage in total knee arthroplasty (TKA) recurrent infections and oncological or traumatic defects of the upper leg from 2018 to 2021. Outcomes evaluated were the successful soft tissue reconstruction and flap complications. Surgical timing, reconstruction planning, technique, and rehabilitation protocols were discussed. Results Twenty-one patients were included in the study. Nineteen GM-MSAPs and 2 GM-LSAPs were performed (soft tissue reconstruction in infected TKA [12], in infected hardware [4], and in oncological patients [5]). Donor site was closed primarily in 9 cases, whereas a skin graft was required in 12. Flap wound dehiscence (1), distal flap necrosis (1), distal necrosis of the skin paddle (1), and donor site infection (1) were the encountered complications. Flap reraise associated to implant exchange or extensive debridement was successful without requiring any further flap surgery. Conclusion The propeller-perforator GM-MSAP offers qualitative defect coverage and easiness of multiple flap reraise due to skin availability and its laxity.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.11-16
• /
• 2012

In 2014 Flex-PLIfor the pedestrian protection will be applied to NCAP test. The most significant feature of Flex-PLI is constructed with segmental bone cores for the femur and tibia regions. So it can be more reproducible by representing pedestrian injuries such as knee ligament and tibia injury during the pedestrian crash against vehicle. In this paper, Analyzed the characteristics of Flex-PLI through the structural analysis and the test results by using Flex-PLI for our compact vehicles. Finally countermeasures into compact vehicle were proposed to fulfill the injury criteria of Flex-PLI.