• 한국운동역학회지
• /
• 제17권3호
• /
• pp.181-188
• /
• 2007

The purpose of this study was to investigate the biomechanical effects of wearing different type of insole shoes on gait characteristics in patients with knee osteoarthritis. Seven patients with knee osteoarthritis (Grade 3 & 4 by Kellgren & Lawrence) were participated in the study. They wore two different type of shoes (with Gel-type Insole: GIS, with Normal insole: NIS) during gait. Three dimensional cinematography and Ground Reaction Force(GRF) data were used to get the maximal value of horizontal distance between the center of pressure in GRF and knee joint center, GRF in mediolateral direction, peak value of GRF in frontal plane, vertical compressive force and adduction moment in knee joint. The results were as follows: The maximal value of horizontal distance between the center of pressure in GRF and knee joint center was smaller in GIS than NIS. The peak value of GRF in mediolateral direction was found in 30% of gait cycle, five subjects wearing GIS showed lower value of peak GRF in mediolateral direction than wearing NIS. The peak value of GRF in frontal plane and vertical compressive force in knee joint did not show any difference between GIS and NIS. The adduction moment in GIS decreased in the late stance of gait and the mean value of the adduction moment in GIS smaller than that in NIS. GIS may help to move quickly knee joint center to the center of pressure in GRF, therefore it may prevent increasing the adduction moment in knee joint.

• 대한관절경학회지
• /
• 제2권1호
• /
• pp.77-79
• /
• 1998

Ganglion in the anterior cruciate ligament is quite rare finding at the time of knee arthroscopy. We experienced a 58 years old female pateint with a ganglion in the anterior cruciate ligamentwho complained gradual development of flexion contracture of left knee joint and treated with arthroscopic excision of ganglion resulted in freedom from flexion contracture of her knee joint.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.33-45
• /
• 2017

Objectives The objective of this study is to report the evidence that continuous passive motion (CPM) therapy combined with Korean Medicine is effective for knee injuries. Methods We searched 2 Korean medical electronic databases, and 2 Chinese electronic databases to find randomized controlled clinical trials (RCTs) that treat knee injuries with Korean Medicine combined with CPM therapy. We selected studies by screening. We extracted data from selected RCTs, and analyzed RCTs by using Cochrane's Risk of bias criteria. Results 386 studies are searched, and 7 RCTs are selected. According to the study, several kinds of Korean Medicine such as hydrotherapy, decoction, acupuncture, moxibustion, and manual therapy are used with CPM therapy for the knee joint postoperative rehabilitation. We found the encouraging evidence that Korean Medicine and CPM combined therapy is more effective than single CPM therapy by alleviating pain, increasing range of motion, and improving knee function, etc. However, the risk of bias in most RCTs was judged to be uncertain. Conclusions Combination of Korean Medicine and CPM therapy can compensate the defect of single CPM therapy, and promotes the recovery of knee joint function.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.21-29
• /
• 2005

The Purpose of this study was to seek determinant factors through analysis of 65 snatch skill kinematic factors of Athletics participated in 2001 Asian weightlifting competetion. The conclusion were as follows ; 1. In order to enhance snatch skill, when barbell move on knee position, One should be flex knee joint to 105-110 degree, and In pull motion, One should be move powerful extension of knee and hip joint. 2. In last pull motion, One try to make more lock out motion than extra extention motion of hip joint 3. In order to enhance snatch skill, It is inportant that elevate barbell highly by last pull motion through powerful knee extention, poweful hip flextion and One should be make lock out motion fast in the same time. 4. In order to enhance snatch skill, anterior-posterior movement width of shoulder joint should be small. 5. In order to enhance snatch skill, Hip joint should be move vertically on start and lock out phase, but In pull phase, extension motion of hip joint shoulde be performed more largely and powerfully.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1262-1269
• /
• 2004

This study predicts muscle forces acting on the lower extremity when the knee joint is in deep flexion. The whole body was approximated as a link model, and then the moment equilibrium equations at the lower extremity joints were derived far given reaction farces against the ground. Measurement of deep flexion was carried out by placing ten markers on the body. This study calculated the moment acting at each Joint from the equations of force and moment, classified the complicated muscles around the knee joint, and then predicted the muscle forces to balance the joint moment. Two models were proposed in this study: the simpler one that consists of three groups of muscle and the more detailed one of nine groups of muscle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1288-1293
• /
• 2003

This study predicts muscle forces acting on the lower extremity when the knee joint is in deep flexion. The whole bodies were approximated as a link model, and then the moment equilibrium equations at the lower extremity joints were derived for given reaction forces against the ground. Measurement of deep flexion was carried out by placing ten markers on the body. This study calculated the moment acting at each joint from the equations of force and moment, classified the complicated muscles around the knee joint. and then predicted the muscle forces to balance the joint moment. Two models were proposed in this study: the simpler one that consists of three groups of muscle and the more detailed one of nine groups of muscle.

• 한국산업정보학회논문지
• /
• 제20권3호
• /
• pp.81-86
• /
• 2015

본 논문에서는 인체의 CT/MRI에서 단층 촬영된 무릎관절을 영상처리 과정을 거쳐 3차원 관절 모델을 제작하였다. 실제 무릎관절의 형상을 추출할 때 설정 조건에 따라 3차원 형상정보가 달라질 수 있다. 이러한 미세한 3차원 형상정보의 차이에 따른 무릎관절의 구동특성을 분석하기 위해 2가지의 관절 모델을 3차원 프린터를 이용하여 제작하였다. 제작된 관절모델을 이용하여 관절구동 시 압축력 실험을 수행하였고 형상의 차이에 따라 결과값의 차이가 발생하였다. 따라서 생체모방형 바이오리액터를 개발할 경우에는 형상정보의 차이에 대한 연구가 선행되어야 할 것으로 사료된다.

• PNF and Movement
• /
• 제21권3호
• /
• pp.337-344
• /
• 2023

Purpose: The purpose of this study was to evaluate changes in the lower extremity kinematics of subjects with dynamic knee valgus after we applied non-elastic tape while they performed overhead squat. Methods: Twenty-five subjects (12 females, 13 males) with dynamic knee valgus participated in this study. Hip and knee joint kinematics and medial knee displacement were measured during overhead squat with and without hip correction taping. Results: Hip joint internal rotation, knee valgus, and medial knee displacement were significantly lower during overhead squat with hip correction taping than without hip correction taping, but there was no significant difference in hip joint flexion and abduction. Conclusion: Hip joint correction using non-elastic taping is recommended to subjects with dynamic knee valgus to improve their lower extremity movement and alignment during overhead squat.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.376-378
• /
• 2005

In this study, we have evaluated and classified arthritic pathology using the acoustical analysis of knee joint sounds. Six normal subjects and 11 patients with knee problems were enrolled. Patients were divided into the 1st patient group which required an orthopeadic surgery and the 2nd patient group of osteoarthritis. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position and the joint angle. The result showed that the fundamental frequency of the 2nd patient group and standing position was higher than the others, and that the pitch of sounds changed unstably.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1471-1472
• /
• 2008

To analyze biomechanical effects of various types of menisectomy in the knee joint, the contact area and pressure distribution of intact the knee joint and the operated by various menisectomies were studied by using finite element method their results are compared with each other. In this study, the femur, the tibia, the articular cartilage and the menisci were three dimensionally reconstructed using MR Images of healthy knee joint in full extension of 26 years old male. Also, three dimensional finite element model of the knee joint was constructed including the models of ligaments and tendons on the reconstructed three dimensional model. Bones were considered to be rigid, articular cartilage and menisci were considered as homogeneous, isotropic and linearly elastic materials and ligaments and tendons were modeled as hyperelastic materials. Based on the results, the effects of various types of menisectomy on the knee joints are clearly elucidated.